I'm using this disc sander since builded. I wanted to give you some advice. It would be good to make attachments a little wider. Up to 34cm. In addition, insert nut - bolt can be used instead of screws to remove and install attachments. Thank you Humberto Hernandez & Hans Bächtold Regards.
Im halfway give or take. Just glued the m turning and stationary races together with epoxy 😭😭😭👍🤣 Will try again in d couple of hours. Thank you Greensaw for the detailed plans. Very nobel of you. Will one day have a nice shop to make toys.
A brilliant idea, I love the small Jig at the end for circles, so simple but never seen anyone do it, a brilliant build, well done and thanks for posting from Garry in to UK
Eine wunderschöne, gut durchdachte Konstruktion. Schon das Zusehen beim Bau hat Freude gemacht. Was ich bei anderen Postern auf diesem Gebiet meist vermisst habe, habt Ihr anschaulich gezeigt, nämlich die Schritte zum Austauschen des Schleifmittels. Gratulation zu dem Projekt. Den ABO-Knopf habe ich gerne gedrückt.
Καλημερα φιλε μου ,εχεις αρχισει και ολες σου οι κατασκευες ειναι εξαιρετες ,με πολυ σαφηνεια και σωστες μετρησεις και πλανα.. ..ευχαριστω για το βιντεο και την κατασκευη σου !!!!! ΑΠΕΘΥΝΟΜΑΙ ΣΕ ΟΛΟΥΣ ΤΟΥΣ ΕΛΛΗΝΕΣ ,ΕΙΝΑΙ ΔΙΚΟΣ ΜΑΣ ΚΑΛΟ ΕΙΝΑΙ ΝΑ ΒΑΖΟΥΜΕ ΚΑΙ LIKE ΩΣΤΕ ΝΑ ΦΘΑΣΕΙ ΤΙΣ 500000χιλ ,διοτι οτι φτιαχνει ειναι εξαιρετη κατασκευη !!!!!!!!!!!!!!! Ε Υ Γ Ε !!!!!!!1
yes I am going to make one now that I have yours, and I really like your bearing idea I might use two though but well thought out with circle and mitre gauge options
Excellent! You video craftsmen - and crafts women - never cease to amaze me! My son, a RISD graduate now working independently in Brooklyn, is of a similar bent. Best to you and all the rest.
Escelente trabajo muy bueno me pondré en hacer muy útil para obtener una lijadadora en casa me gustó tu invento me parece que allí también tiene las medidas de los tableros y la medida del rodaje soy Jesús de Argentina
Gentleman. The best idea application video. Very inspiring. Best part you have shown the sander paper replacement which i was looking for you. But grit not mentioned is it 60, 80, 100 or 120 grit. Please reply. Thanks you a lot.
Me encantó el diseño gracias x pasar este video y quiero uno igual yo ando comenzando mi carpintería y eso me va a servir un chingo thanks brother I am liked
Very good job! I would suggest you to add 02 hinges on the lid instead of screwing it. In this way, it would be easier to open and replace the sand disc. On the other hand, your video is attractive...no adds...no boring electronic music! Congrats!
I put the part in front of the sanding wheel on drawer runners with a lock, that way I don't have to dismantle it to change the sand paper. I also used Velcro backed paper, to save time.
I like the build in general, and would like to try this with some adjustments to the plan. I think the stock is thick enough that you could use threaded inserts in the base for the removable section. That way, the wood won't wear from the screws being removed. Also, I have to wonder about the durability of the double sided tape as the adhesion technique for the sanding discs. Seems that after several removals, the glue would wear from heating and removal.
Great video.....This one seems to be little more manageable in making it then alot of others. And I am not putting them down as some of them are totally incredible. Thank you
Very nice project. I made a similar one about 4 years ago using my late fathers old Black and Decker corded drill and after a bunch of work it is still going strong. If it packs up tomorrow I would make another more like yours as I don't have the various attachments you made. I assume you operate it with a foot switch or something but the trigger looks as though it is not pushed in. Maybe you could explain. When I did mine I Just tied down the trigger and switched it on and off via a switched socket. Also I used a velcro system so it was a piece of cake to change the discs. If it were a foot control I would be snookered as I am paraplegic so my legs just do not work. Great video though thank's
Hi Barry Norman, thank you very much, I'm glad you like it. Yes, I'm using a foot switch. But it doesn't matter! It possible to use on-off hand switch as you do. There is a black button for locking on my drill. It is close to trigger. Please look again, the trigger is locked. I didn't want to use the Velcro system. Because my sandpaper is not suitable and the Velcro system is soft and can be stretched. I congratulate You've done a wonderful job. Regards.
Un nuevo suscriptor, me gusto mucho el sistema de enganche al taladro intentare copiarlo para un proyecto cimilar un gran saludo mui buen video, y a seguir
Hans B Very well done. But to change the different bases is a bit to much unscrewing and replacing. Wondering hoe many times you can do that before the screws dont hold anymore. i sure will build one too.
Elinize saglik ustam sizi hayretle takip ediyorum ve izliyorum sizin sayenizde bende kucuk bir atolye kurdum makinalar yapmaya karar verdim sizinle bilgi alisverisi yapmak isterim
![DIY Spindle Drum Sander for Drill Making fee PDF - Drill sander [4K]](http://i.ytimg.com/vi/Nwq7JAn0E0A/mqdefault.jpg)
I'm using this disc sander since builded. I wanted to give you some advice. It would be good to make attachments a little wider. Up to 34cm. In addition, insert nut - bolt can be used instead of screws to remove and install attachments.
Thank you Humberto Hernandez & Hans Bächtold
Regards.
RCTURKA carrito
Im halfway give or take. Just glued the m turning and stationary races together with epoxy 😭😭😭👍🤣
Will try again in d couple of hours.
Thank you Greensaw for the detailed plans. Very nobel of you.
Will one day have a nice shop to make toys.
Excellent work.
Incredible ingenuity, I’m learning a lot from you. Especially in thinking outside of the box.
A brilliant idea, I love the small Jig at the end for circles, so simple but never seen anyone do it, a brilliant build, well done and thanks for posting from Garry in to UK
Thank you Garry for your nice comment.
just what I needed
Спасибо за видео. Отличная самоделка.
Eine wunderschöne, gut durchdachte Konstruktion. Schon das Zusehen beim Bau hat Freude gemacht. Was ich bei anderen Postern auf diesem Gebiet meist vermisst habe, habt Ihr anschaulich gezeigt, nämlich die Schritte zum Austauschen des Schleifmittels. Gratulation zu dem Projekt. Den ABO-Knopf habe ich gerne gedrückt.
Vielen Dank für Ihren netten Kommentar.
Awesome... I'll make it... Thanks for share.
Great nice woodworking
Wow simple, efficient and effective. Gonna be building this.
Thank you!
Beatiful, i want the mine now
Great idea and great project, excellent
Hello. Very nice idea and good results !!! Greets. Desde Adrogué BsAs Argentina para el resto del mundo.
Thank you so much. I am very glad that you like it.
.......Thank You very much.....''GreenSaw''....
Great video! I will have one by next weekend........Best Regards, Bill
Thank you... I wish conveniences.
Καλημερα φιλε μου ,εχεις αρχισει και ολες σου οι κατασκευες ειναι εξαιρετες ,με πολυ σαφηνεια και σωστες μετρησεις και πλανα.. ..ευχαριστω για το βιντεο και την κατασκευη σου !!!!! ΑΠΕΘΥΝΟΜΑΙ ΣΕ ΟΛΟΥΣ ΤΟΥΣ ΕΛΛΗΝΕΣ ,ΕΙΝΑΙ ΔΙΚΟΣ ΜΑΣ ΚΑΛΟ ΕΙΝΑΙ ΝΑ ΒΑΖΟΥΜΕ ΚΑΙ LIKE ΩΣΤΕ ΝΑ ΦΘΑΣΕΙ ΤΙΣ 500000χιλ ,διοτι οτι φτιαχνει ειναι εξαιρετη κατασκευη !!!!!!!!!!!!!!! Ε Υ Γ Ε !!!!!!!1
Fantastic project.
Thank you! Cheers!
yes I am going to make one now that I have yours, and I really like your bearing idea I might use two though but well thought out with circle and mitre gauge options
Yess ☺🙏🙏☕☕🇮🇩
Good job
Excellent! You video craftsmen - and crafts women - never cease to amaze me! My son, a RISD graduate now working independently in Brooklyn, is of a similar bent. Best to you and all the rest.
Thank you. Good luck.
Excelente la lijadora para bricolaje
Me alegra que te guste, gracias.
Creo que es el mejor proyecto de su tipo, felicidades y gracias por compartir su experiencia saludos cordiales 🖐️ desde Chile 🇨🇱
Me alegro mucho que te guste, gracias. Te deseo días saludables.
Good idea good job 👍
Great video and great imagination. Thank you. Now I must make one!
Thank you Tony5006, go for it !
This is a great idea - I particularly like the attachments for it, especially the circle maker. Great idea, great video, well made, nice one mate !
Thank you
Saya suka dengan apa yang anda buat,membuat saya terinspirasi ingin membuat nya di rumah,sukses selalu dengan karya" yang lain..salam dari indonesia
Halo, terima kasih atas komentar Anda yang baik.
Very nice
Great project
Ellerinize sağlık. Yine kolay ama her işi bitire bilenbir tasarım kutlarım.
Teşekkür ederim Ali Bey...
Molto bella, complimenti. Prenderò spunto per farla come la tua, molto utile e pratica. Grazie!!!!
Grazie mille. Sono molto contento che ti piaccia.
Escelente trabajo muy bueno me pondré en hacer muy útil para obtener una lijadadora en casa me gustó tu invento me parece que allí también tiene las medidas de los tableros y la medida del rodaje soy Jesús de Argentina
Excellent work. Congratulaions!
Thank you so much. I am very glad that you like it.
Good ideas
Glad you like them!
Gentleman. The best idea application video. Very inspiring. Best part you have shown the sander paper replacement which i was looking for you. But grit not mentioned is it 60, 80, 100 or 120 grit. Please reply. Thanks you a lot.
Me encantó el diseño gracias x pasar este video y quiero uno igual yo ando comenzando mi carpintería y eso me va a servir un chingo thanks brother I am liked
Mantap bos 👍👍👍
good job
MUY, MUY, MUY CHÉVERE...QUE VERSÁTIL QUEDÓ....SALUDOS DESDE GUAYAQUIL, ECUADOR....
Gracias
Super!! Very well
Very good job! I would suggest you to add 02 hinges on the lid instead of screwing it. In this way, it would be easier to open and replace the sand disc. On the other hand, your video is attractive...no adds...no boring electronic music! Congrats!
Thank you for your advise
Deine Ideen sind einfach genial. Top👍
Hayy 🙏🤝🤝☕☕
very nice. really liked it. Engineer from India.
Thank you, Greetings to India.
I put the part in front of the sanding wheel on drawer runners with a lock, that way I don't have to dismantle it to change the sand paper. I also used Velcro backed paper, to save time.
Wow wow wow wow great 👍
Thank you.
Excelente canal ...
bravissimo siccome devo fare anche io il disco in legno che colla hai usato
Amazing Creativity!
Thank you! Cheers!
very very very very good job
thanks :)
Molto ingenioso cercherò di riprodurlo anche io saluti da milano italy
Grazie.
excellent project. It is easier if you go for Velcro back sanding sheet, so that changing would be easier.
Thank you for your advice. Yes, you're right, but the velcro is a bit flexible.
Excelente trabalho
Ông này làm ẩu vãi chưởng, gọt gọt khoét khoét. kaka
You're the man. Awesome craftsmanship.
thanks :)
салам друг! хорошая работа. лайк
Спасибо тебе, друг.
I like the build in general, and would like to try this with some adjustments to the plan. I think the stock is thick enough that you could use threaded inserts in the base for the removable section. That way, the wood won't wear from the screws being removed.
Also, I have to wonder about the durability of the double sided tape as the adhesion technique for the sanding discs. Seems that after several removals, the glue would wear from heating and removal.
Have made a angle grinder biscuit cutter or biscuit cutter please let me know thanks
excellent!
Thanks.
You are such a great men. Keep doing.
Thank you so much. I will keep doing.
I do like your invention very much.
Best regards from Indonesia.
Thank you.
Greetings to Indonesia. Regards...
Ingenious!!!
How about using latching clips to attach the various accessory boards to the base?
Impressionnant !
Really a great job!!
Thank you...
Onde comprar um deste
Top notch!
Foot switch?
Como faz esse esquema com as lixas
Strong as always !!
I try to do it !!
you are very good!
Thanks
Thank you so much. You're very good. I got your message :)
thanks
Simply genius, thanks for sharing! I'm favoring this one, probably try to copy it!
Fantastic fantastic Art work....
Thanks...
Just a question. In the hardwood bearing carrier, why did you only use a bearing at one end, and not two bearings, one at each end.
Great video.....This one seems to be little more manageable in making it then alot of others. And I am not putting them down as some of them are totally incredible. Thank you
Лайк, молодец!
If you need to change the sand paper what should you do
shown in the video. th-cam.com/video/aOFPRXH4D_s/w-d-xo.html
@@GreenSaw thanks
Genial
Very nice project. I made a similar one about 4 years ago using my late fathers old Black and Decker corded drill and after a bunch of work it is still going strong. If it packs up tomorrow I would make another more like yours as I don't have the various attachments you made. I assume you operate it with a foot switch or something but the trigger looks as though it is not pushed in. Maybe you could explain. When I did mine I Just tied down the trigger and switched it on and off via a switched socket. Also I used a velcro system so it was a piece of cake to change the discs. If it were a foot control I would be snookered as I am paraplegic so my legs just do not work. Great video though thank's
Hi Barry Norman, thank you very much, I'm glad you like it. Yes, I'm using a foot switch. But it doesn't matter! It possible to use on-off hand switch as you do. There is a black button for locking on my drill. It is close to trigger. Please look again, the trigger is locked. I didn't want to use the Velcro system. Because my sandpaper is not suitable and the Velcro system is soft and can be stretched. I congratulate You've done a wonderful job. Regards.
Hi@@GreenSaw Woops yes now I look closer I can see the trigger lock. I get your point on the Velcro. Cheers for now.
hello sorry but I might know what kind of glue you used to attach the abrasive disc thanks:
Hello, I used double-sided tape, regards.
Magnífico, vou tentar fazer essa máquina, muito grato.
Obrigado. Boa sorte.
I liked your work, very good.
Excelente. Maravilhoso.
Fantasy. This is the best emery I've seen on TH-cam!!!
Un nuevo suscriptor, me gusto mucho el sistema de enganche al taladro intentare copiarlo para un proyecto cimilar un gran saludo mui buen video, y a seguir
The Best👍👍👍👍👍👍👍👍👍👍🤝🤝🤝🤝🤝
Great stuff. 10/10
How do yo attach the sand paper is it self adhesive
Double-sided tape is attached to the disc.
th-cam.com/video/aOFPRXH4D_s/w-d-xo.html
Top de mais
Nice disc sander but sandpaper replacement complicated
Baba sen nasıl bir kralsın yav vallahi azim acik izledim. Eline saglik satarsan alirim valla :)
Teşekkür ederim Sabutay, malesef satma imkanım yok :( Saygılar...
super neat i love it. you can also try to use the 775 dc motor with it
Thank you. Nice idea to try.
Amazing. Thanks for sharing.
Thank you Jack Jack.
A great project my friend, I would make a few more disks, then you could have different grits, with out the need to replace the paper, great project.
Great idea ! Thank you
excelente
Excelentísimo!!! de lo mejor, muy versátil y muy limpio el trabajo. Felicidades y espero seguir disfrutando de nuevas ideas
Gracias. :)
I like it....👍👍👍
Thanks...
Hans B
Very well done. But to change the different bases is a bit to much unscrewing and replacing. Wondering hoe many times you can do that before the screws dont hold anymore. i sure will build one too.
Hi Hans B. Your advise is good. it may be more appropriate to do as you said. I attached your advise to first comment. Thank you.
Fit some threaded inserts for the removable panels, this can be done after, great job.
super
Esta algo complicada de hacer, pero para lo que cuesta una lijadora de banco, vale la pena hacerla.
Elinize saglik ustam sizi hayretle takip ediyorum ve izliyorum sizin sayenizde bende kucuk bir atolye kurdum makinalar yapmaya karar verdim sizinle bilgi alisverisi yapmak isterim
Merhaba teşekkür ederim. TH-cam üzerinden bilgi alışverişi yapabiliriz. Videolarımı takip edin sormak istediklerinizi buradan sorabilirsiniz.