Bagging a Gmc Denali, 24x15s, Accuair E Level, US Mag Wheels,
ฝัง
- เผยแพร่เมื่อ 16 ก.พ. 2019
- Custom front kit and rear kit was built and installed by Reklez Suspension Works to lay this Gmc Sierra flat on the ground.
Check out a latest built that left our shop. Craftsmanship by Reklez Crew in Pearland, Tx.
Buy Parts: www.reklez.com
Facebook: / reklezsuspensionworks
Call our shop durning business hours:
9am-6pm Central Time
(832) 770-4366 - ยานยนต์และพาหนะ
Thanks for watching! Buy Parts: www.reklez.com Prices by phone only Call us (832) 770-4366 9am-6pm Central Time.
Were are you guys located?
Reklez Suspension Works nice work
Nice
Clean
задний мост от какой машины? где купить такой? чтобы колеса можно было перевернуть
rear axle from which car? where to buy one? so that the wheels can be turned over
Such an underrated TH-cam channel 💪🏽💪🏽💪🏽
I agree 👌👍👍👍
Beautiful, proper, durable, daily useable... wow, this is next level WAY UP👏👏👏
Your attention to detail is awesome. I love how you have all the fittings in the valve block turned to match.
Damn you guys do top notch work. Makes me want another mini truck!
Those rear wheels 24"x15"!! Sick as frick man!! Stock fuel tank, raised up of course but still a stock tank in there with everything else so no paint or body work needed with moving fuel doors or anything like that. I love how all you guys do is paint it Black. Not all you do, but lot of places smear Bondo on stuff to "mold" it, aka hide shit. You guys leave it raw in a sense and show all the welds and brackets and it's not grinder happy all-over. Looks like a machine did all that work it's crazy! It's beefy as hell to not all flimsy looking with thin plates or tinny tubbing. One day when my Toyota mini grows up to be a full-size I know were I'm going to get work done!!
Can’t wait to get my truck done! Whooo in line!
Man that's a nice kit.
Great work to you and your team!
Nice build truck looks great
build looks great.
Fab work looks really nice...well organized.
Beautiful build. I have a Denali exactly like this one. I've been thinking about doing a air setup but nobody does this type of work in my area.
Man I love what yall boys doin down there keep it up love the vids
Appreciate it. We got more to come.
Love your work man! 👏 👏
Need more content love the clean work really good quality work
🙏🙏we have about 40 videos. Check them out also gonna up load more. Thanks for the support
Reklez!! Y’all are sick! Best work out there! #LowLife !! Keep it goin y’all!
Thanks for the support 👌👍👍
Reklez Suspension Works - hey y’all. Here’s a link to a quick video of my Tahoe. th-cam.com/video/9-YoDFlWjK8/w-d-xo.html
I’d like to discuss getting my Tahoe down to y’all to install the 6” rear springs y’all told me about, plus dropping the front another 1” or 1 1/2”. We’ll wanna include cutting the rear bump stop bracket - free travel mod. Anyway thx again for your help and advice so fat. Cheers.
4:15 its also just smart to keep wires and hoses clean and uniform to last a long time
Real nice bro,👍👍
Nice work
Good work 💯
Really nice
Looks good 👌
Thank you!
Sick!
Unless something has changed recently, the Viair compressors can’t be mounted sideways like that. They will work but severely shorten the life of the compressors. The piston wears uneven on the head when they are mounted that way. Just a heads up (unless Viair has corrected this issue in the past couple years)
Meraviglioso!!!!!👏👏👏👏👏👏👏👏👏👏👏👏🔝🔝🔝🔝🔝🔝🤙🤙🤙🇺🇲🇺🇲🇺🇲🇺🇲
Dope 👍
Badass.
Man i really love how y'all are so clean everything looks oem. I wish i Would have gone with y'all to do my C notch. Sad thing is i took it to a big name shop in the Houston area I wasn't too happy with there results. I'm going to get in contact with y'all with the rear coilover suspension set up you offer
Thank you!
If you dont mind me asking how much was this whole system and installing it i am going to come by the shop this week just wanted to get an idea on how much i should bring
When’s the front kit video coming out ?
Nice lookin truck! What air filter set up is being used?
How did you manage to fit wheels on there since the rotors are so close to the frame rails??😯
When do we get a vid on the front kit??
I've looked for the video on the front kit, but I can't seem to find it. How does it all work with the front half shafts and such?!
Badd ass truck cuz what kind of air filter was that where did u buy it also did u notice any gains thanks bro
So yo Reklez crew! I don’t have IG or FB or anything social media. I’m hoping to get my Tahoe in to see y’all in April - I believe I talked to the owner - the guy that narrates all the vids. He told me that he’s got 6” springs for the rear for my Tahoe. So I wanna have y’all do a free travel mod, add the 6” springs in the rear and also adjust my front McGaughys struts down another 1” to 1 1/2”. Y’all have an email!? Let’s discuss prices and schedules to get this goin! 😀. 👍🏻
what did you charge this guy? work is amazing and want this done to my 2016 silverado
Maybe a dumb question but why are the wheels on most bagged trucks set deeper in the fender wells (mainly in the front) than they would be on stock suspension? Its the only thing keeping me from bagging mine, I just don't like the look of the wheels sitting so deep in the fenders compared to being as close to the edge as possible.
Can you bag a awd like that?
Good work fellas. 👌🏽 quick question, how does bag behind the axle ride? I've personally never rode on one. My bags are on the lower link bars. And it's pretty smooth, how does bag on bar compare to bag behind axle
Its a smooth ride. Bag on bar can be smoother depending on location of the bag. However for this setup keeping factory gas tank, can use multiple sizes of wheels. Best location is behind axle.
What kinds of cold air intake on the engine is that?
Give us an idea of how much that cost to do
Brother did you shorten the rearend
Will 265 35 22 fit on a 22in.x9.5 rim ? will they work on a 5-7 drop for a 2007 classic Silverado ext .cab without rubbing.
How high from stock can you go? How low from stock can you go?
Thoes 24s are perfect...
How much to do the full install?
What’s the total price to have this done ?
Specs on front tires ?
A SAME SET UP FOR A EXT CAB 01 how much is runnin for?
Dose it still have e-break??
Where dose the spare go??
how much for this whole entire kit tho
Great build. The question i have is, does all this customized work make for more weight or the the truck the same weight or less? Again a great build and very very nice work.
Thanks, not sure. Would have to weigh all the factory components vs new components.
Ofcourse it adds more weight than being stock
But the real question is, can this still tow or haul factory specs?
@@kevinpeterson4098 Sorry but I disagree. Don't see how thats relevant to the video. Since a factory truck dont lay on the ground or come with 24x15s. If your question is "can a bagged truck still pull/haul?" Then I would say there is more than its fair share of videos showing bagged dually pulling car haulers. Thanks
I wasn't trying to make a disagreement. Reklez, Just trying to see if this awesome truck could out tow it's factory gvwr? Interested to see huh? I bet it would haul more than factory! Imo opinion!
Love how badass this looks! Would you guys happen to make parts to bag a 2000 Chevy S10 Xtreme stepside I don’t want to cut my bed. Thanks
Not yet would love to get one in the shop to build our parts.
Reklez Suspension Works wish I was closer, I live in Massatwoshits
How much is the kit and the installation
Have u bagged a suv?
Im from FW Txs and i dont mind taking my truck to yalls shop for great work . How much for a 7/10 drop with front tubs combined with the back tubs ?
Call us for prices thanks
Aye I’m trying to bag my 1997 Dodge Ram 1500 with wide body kit when I bought it was dropped but I don’t think they dropped it the right way I was wondering if you guys work on that type of truck
Sorry, we work on 2002 and up Dodge ram
How y’all charge for all that work for a truck
How much did all that cost
How much does this set up comes up to? Price?
How much does it cost to get dropped like this?? I want to run 24X10 in the front ant 24x16 in the back I just want a price so I can go and get it done 🥴
How much is something like this
How much is for that work
How much that cost ?
Call left message on my 2008 gmc awd on 24? What turn around time on 5-7 drop ?
Cool! Get with us for more info.
@@ReklezSuspensionWorks Will call aging tuesday....
@@dwaynedavis2721 you gotta show up in person. You won't get anything done over the phone. Trust me I tried. Lol
Bro i got an 08 sierra 2wd i want to statik 6f 9r i want underbed notch control arms and spindles you got a kit for me?
On our website
How much a job like this cost
Cuanto por ese trabajo
I would like to do something similar to in escalade 09 how much would it be??
Call us thanks
No hate but why doesn’t the truck lay out more? Front barely tucks wheel, was it laying crossmember?
No worries. Lays flat on crossmember. It would tuck more if they were 26s or bigger.
On the 99-06 trucks the trans crossmember needs sectioned to lay flat on the frame. I guess my question is, does this one lay frame or on crossmember? I’m doing all this for the first time on my 06 crew cab just trying to gather info
How much does this run? Shoot me a message please!
Can a 4wd/4x4 truck be bagged? And how much?
Price by phone only 👌
1/4" or 3/8" line. Looks like 3/8" i prefer 1/2". The fast drop is sexier
Do yall have a relocation kit for 99 to 06 Silverados
Not at the moment
Do you know when one maybe available
@@themidasgroup5978 Not at the moment. Maybe late this year
Anybody have an idea of how much bagging my truck would cost? 2016 silverado single cab
We do. It takes a call to us. Thanks 👌
Did you ever call and get an answer?
@@travisbearden9272 yea its between 8 and 12k
Is this Denali and awd?
No, 2wd.
How many gallons is that tank that's a big tank
7 gallon
Available on our website www.reklez.com
5/7 drop
Nice air intake for the engine. Cause I know engines love to be heat soaked and love hot air coming in 😂
😂😂 watches a video to complain. 😂😂 Weird flex but ok 👌 Living your best life😂😂
Reklez Suspension Works gotta complain about something! Definitely couldn’t complain on that nice fabrication and other works though 😜👍🏼
@@ihatemytown 😂😂
Real nice bro,👍👍