PAINT PREP for DIY HYDRO DIPPING
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- In today's video, we will are continuing our video series called:
Just The Tip!
In this video series, we will be showing and discussing various topics in the hydrographics world and give helpful tips and tricks for those just starting out in hydro dipping or those that want to learn how to hydro dip at home.
This video will cover the topic of paint prep for do-it-yourself hydro dipping.
Follow along as Chris from All Things Fun Hydrographics gives a complete guide to paint prep for DIY hydro dipping. We will take you through the process of preparing parts for hydro dipping in a professional shop, and give you information on how you can prep your parts at home for DIY hydro dipping. As always don’t forget to stick around all the way to the end for all the funny bloopers.
Link to One Hit Wonder Paint:
www.ohwpaint.c...
Get 5$ off your OHW order use code: ATFHYDRO
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Check out some of our other cool hydro dipping videos. We upload at least one awesome project video each week. Here is a video suggestion that you may enjoy where we hydro dipped a mailbox and made it glow in the dark! :
• HYDRO DIP A MAILBOX - ...
If you have questions about our hydrographics or Cerakote services, check out our frequently asked questions playlist, where you can find tons of useful information, and instructions on how to place an order:
• What is Hydrographics?...
Our Website: www.atfhydrographics.com
Email: chris@atfhydrographics.com
Phone: 404-556-9870
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products we use every day in our Hydrographics/Cerakote shop:
Shop Towels: amzn.to/38GjaCN
Delicate surface tape: amzn.to/2PeYEBN
Respirator: amzn.to/3aIBP2K
Plug kit: amzn.to/2RtZA6Q
Mixing cups: amzn.to/30U3I3j
Mixing sticks: amzn.to/2S3aXlF
Roll pin punches: amzn.to/2O0AoCU
Mallet: amzn.to/2NZvPIW
Our Preferred Painting tape: amzn.to/3bXw6GS
Magnetic Mixing Plate: amzn.to/2PZeAIW
Magnetic Mixing Capsules: amzn.to/2vT3z4Z
Glass Beaker: amzn.to/332Li1d
Disposable Pipettes: amzn.to/2VZjARt
Squirt Bottles for Acetone: amzn.to/2xg0v3c
Water Slide Decal Paper: amzn.to/3aGs8R2
Great video and bloopers were awesome, thank you 😊
Very good and informative video. Picked up several key tidbits. Thanks again. Let’s see one on making jigs that you always use
Thanks Terry. I have plans for a jig video very soon.
just ordered paint from them thanks for the info
No problem 👍 Enjoy, it is really good paint!
Dude you're videos rock.. I'm trying hydro dip and you have my go to videos 💪😎👍
Thanks Jonny, appreciate you watching our video. Hopefully we will be able to teach you much more in some of our up coming Just The Tip videos.
yeh what "Jonny" said
@@w8nc82 Thanks J.D. I appreciate it!
@@AllThingsFunHydrographics likewise chief!
Where do I find the flims ?
Love all your videos!!!! I'm new to your channel and love it
OHW, Big Brain, TWN, Dip Pros, Liquid Concepts. Many places sell film.
I have been enjoying the bloopers at the end bring on the brainfarts!
“Step number A” 🤣🤣 I bet if you kept going no one would have noticed, and if they did they would have had a good chuckle.
I wish I could have kept going, but I heard what I said and my brain melted... like wtf did I just say? Lmao.
@@AllThingsFunHydrographics 🤣🤣
Have your tried purple degreaser works good on automotive parts at least just curious if you have tried it love the videos thank you for sharing your talent
Perfect man, thanks
So what if I just want to do my plastic engine cover I don’t need to sand or wash it with dawn since it’s plastic and not metal right?
Do you have to always put clear coat or primer before u start hydro dipping?thanks!
I live in Hawaii and I don't have time for one hit paint to ship to me. Can you give me a idea what spray paint to use at local hardware store?
I find it funny how GI Joe is sponsored by Cobra...lol
If sandpaper is needed can a high build primer be used to makes sure there wouldnt be any problem with sand scratches
Sand with finer grit to eliminate scratches, don't build up primer for no reason.
@@AllThingsFunHydrographics ok that's what I would do but was curious incase one of those "situations" happen. Thanks for getting back and answering my question I'm working on getting my setup going and I've learned a lot from your videos your a awsome guy helping out guys like me
Thanks mate!!
No Problem, anytime!
Do you have a link on where to get the tank you have for gun cleaning or did you had that tank build.
I got it on ebay. It was called a "gun bluing tank" It was about $300 bucks at the time.
Is the one hit wonder paint heat resistant? Such as for valve covers and intake manifolds an such?
Yes it is good to 400 degrees. I did a video on heat testing.
what step should the flame treating be? before cleaning? before/after sandblasting?
Clean first, scuff or sandblast, blow it off, then flame treat.
@@AllThingsFunHydrographics Thanks!
Any links to any of the degreasers recommended ??? Lol
Crown white gas camp fuel from walmart
How do you hydro dip gun slides from prepping to everything else ?
Same as anything else. Degrease, sandblast, blow off with air, then paint.
Is the scuffing pad the 3M 7447?
Not sure on the model number, I go by colors. Red or gray scotch brite pads.
I've got a question no matter what I do I keep getting little dots all over the project what am I doing wrong I've watched your videos and I try to do what you recommended but it dont help plz help
Look up his video on too much or too little activator
Do you sand blast skulls too?
Yes, very lightly, about 20-30 psi.
Wantvto learn hydrodip
What grit media are you using or did I miss that in the video?
100 to 120 mesh
Psi for the blasting cabinet?
40ish for plastics, 60-80 for aluminum, 90-100 for metal with existing coatings
Thanks brother. I thought you covered it in another video but I couldn’t find it. Btw love the bloops on this one lol
@@dewaynehess3314 Yeah we got info all over the place in different videos. Always plenty of bloopers to go around lol.
@@AllThingsFunHydrographics 😂
Can you do video hydro dipping a wine glass to see how you prep
Sandblast is the only way to prep glass. It would be a really boring video, but thats how to do it. blast it with aluminum oxide or red garnet.
@@AllThingsFunHydrographics Thanks much lol
YOO LUV U 8RO. NO HOMO LOL
LMAO... I laughed way too hard at that
What kind of degreaser did u say?
Acetone or Prep All, They Sell Prep all at auto parts stores like Autozone and places like that.
@@AllThingsFunHydrographics ok n u said naphta too on the video correct??
@@TitoMarlenMelanie yes
When you are using just the tip. Make sure you wrap up your "hands". 😉
But just the tip.... only a second. Lmao
So....I had scooter do a gun stock and scooter did NOT watch your video....36 grit sand paper is not the same as 600 grit... So now I have a stock that's totally 🤬... Now I'm going to do it myself, but what would be the best filter for something like that... The stock is a standard synthetic material... But I might just have to buy a complete new stock because of how bad it is around the action, scooter must have not liked the way the fit was so he preceded to round off EVERYTHING... So I have to strip off everything ( Kuiu Vias) , fit and finish to the action with a "Bondo"?, then clean and prep for the base paint then clean and prep the paint for the film.... 🤬🤬🤬 Next time I work on scooters boat I'm going to bust off all the spark plugs then glue the wires back on and say what, it works just fine, it's just a fishing boat anyway. I'm so pissed right now...I wish I could seen picks thru you tube.
Oh no... scooter got you! I would start fresh with a new stock if it is that bad. You could try bondo and shape it up a little but that sounds like a lot of work!
Thanks for help brother
With everything we know about hydro dipping, how many people could still take a bath the same way again.
LOL.... I defiantly would take a bath in the tank lol
@@AllThingsFunHydrographics 😅😂🤣
Do a pink anime pls
Good idea... maybe will do that on some game controllers or something.
Can you dip HDPE?
Yes. All plastics can be dipped, we will cover that in another video.
@@AllThingsFunHydrographics awesome! I have some kayak mods I want to dip. No other paint methods seem to endure.
@@contagiousreligion email or call me and I will help you out.
You said, "UMMM".
um... no I didn't... um... well maybe, um once or twice LOL
1st!!!
yay! You get the trophy this week! 🏆
Is Frog Tape made with real Frogs? Just checking, lol
No real frogs were harmed in the making of frog tape LOL.
@@AllThingsFunHydrographics I'm glad, keep up the great work!
🤣🤣🤣🤣🤣🤣
👍
يخرب بيتك شو بتحكي و ما شفنا شي مفيد
👍
Just the tip, eh?? I'm three minutes in and your still in the intro.
Finally, gloves?? Cleaning?? Ummm
Wow... 🤯🥱 I mean, duh, right? anyways, I'm trying not to thumbsdown man I really am trying.
Well not everyone that watches the videos are as familiar with the process as you are. I make the videos very basic so that even a brand new person can follow along and learn all the important details. If you saw the massive amount of comments and emails that I have to answer daily about basic stuff like cleaning then you would understand why I go into so much detail for the new people. No reason to thumbs down a person who is taking time out of their day to teach everyone something, but if that makes you feel better then do what you have to.
@@AllThingsFunHydrographics I apologize.. I was frustrated and it wasn't your fault... it was a good video, my attitude is what sucked..
I didn't thumbs down it.
Again, I acted uncharacteristically for myself and even tho I don't know you, never the less I do offer my apology for being a ass.
@@MackSmooth No worries bud, we all have bad days. I appreciate the apology. Sending internet air hug! 😘