Testing the ADT Safewatch pro 3000 #1

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 พ.ย. 2024

ความคิดเห็น • 16

  • @xrobed
    @xrobed 2 ปีที่แล้ว +2

    I have the same alarm system with the same Keypad
    When a door open the chime is so low I can hardly hear it
    Does it have a battery inside that need to be replaced
    If yes how do I open this Keypad ?
    Thanks

    • @Arkman28
      @Arkman28  2 ปีที่แล้ว

      Could probably be a bad speaker. Or a previous owner if bought used or if you bought a house with it could have tape directly over the speaker. To find that out you need to pop off those to clips on the bottom with a flathead screwdriver. And check the speaker

    • @SlyFoxAlarms
      @SlyFoxAlarms ปีที่แล้ว

      Why did you program the Pull Station as an Entrey/Exit with delay? That should be programmed as a fire zone with no verification.

    • @xrobed
      @xrobed ปีที่แล้ว +1

      @@SlyFoxAlarms you are giving me to much credit
      I wish I know any of this
      The installer made zone one the fire alarm
      Zone 2 is the front door, I believe that zone has the delay
      BTW I am not connected to central station any longer
      The police can take anywhere from 25 to 45 minutes to get here
      They say the receive so many false alarm
      They don’t give them much attn.

    • @SlyFoxAlarms
      @SlyFoxAlarms ปีที่แล้ว

      @@xrobed You know that anyone can go into Installer Mode? 6321+800

    • @xrobed
      @xrobed ปีที่แล้ว

      @@SlyFoxAlarms i wouldn’t doubt it
      But I wouldn’t dare
      To do it my self
      It took me years to learn computer

  • @jaysarchive7325
    @jaysarchive7325 ปีที่แล้ว

    I like the sound of the keypad with the smaller screen

    • @AA-777-
      @AA-777- ปีที่แล้ว

      me too, but it can get pretty loud so I prefer the other one

    • @jaysarchive7325
      @jaysarchive7325 ปีที่แล้ว

      @@AA-777- can you adjust the volume

    • @AA-777-
      @AA-777- ปีที่แล้ว

      @@jaysarchive7325 I think you can

    • @SodiumInduction-hv
      @SodiumInduction-hv ปีที่แล้ว

      6150. ADT, Honeywell

  • @cam-f8k
    @cam-f8k 10 หลายเดือนก่อน +1

    If you want the fire alarm pull station to activate the fire panic, set it as a smoke detector.

  • @retrostudio5600
    @retrostudio5600 14 วันที่ผ่านมา

    Make it activate by pulling the switch, and not by password. You can use the password to deactivate it.

  • @edgarmendez8576
    @edgarmendez8576 3 ปีที่แล้ว +1

    Try that's hehehe hey

    • @AA-777-
      @AA-777- 2 ปีที่แล้ว

      wtf