This is a video I've wanted for so long but never thought I'd get! I have wondered about the sound at 2:51 for years! I never knew the purpose and could never explain it to people when I asked for answers. Great video and very insightful!
3:55 It’s worth remembering that your car can be stolen this way. For example, a car thief standing outside your home and cloning your keyless entry keyfob through the walls, then repeating the signal to open your car door and even getting the start/stop button to work. When inside your home, keeping your keyfob inside a faraday cage or faraday bag will stop a thief.
This is probably one of the best video's you've done so far. There were a few weird bleeps I've heard in this clip that were a mystery before watching this video, and I've played around with radio kit of some form for most of my life as a kid and an adult. I believe this could be a continuing series of videos with more weird and unknown bleeps heard through the radio spectrum. Brilliantly researched and presented.
As Mike ( comments ) said you must have put a fair bit of effort into that video, research, finding photos, etc. Then making the video itself, you deserve more views ! Well done
These sounds are always so haunting to me, im not a radio listener or hobbyist but i enjoy your channel! I remember back when my brother and I would use the radio many years ago, i had a phobia of radio static and these noises still creep me out for some reason. I know its all innocuous and normal things now, its just strange to hear all these sounds. Its like an invisible (inaudible) world of machines all shouting at each other and listening to them through a radio receiver is like hearing the sound of a thousand voices screaming all at once....
The excitement of radio scanning dwindled once mobile phones and emergency services went digital. I still have my old PRO-2004 scanner which used to burst into life around 4pm each weekday with mobile phones.
Excellent! Thank you. Back in the early 1970’s I used to hear a deep signal accompanied by s sound that resembled a fog horn on the AM band, late at night. I lived in the US at the time. California Bay Area, near the Pacific Ocean. Never figured out what it was.
That was the mysterious "foghorn", heard at various shortwave frequencies and sometimes even on the AM broadcast band. I don't think it was ever identified; probably some sort of channel marker for spies.
Great Video. Here in Aust we used to have a huge SMR ( State Mobile Radio) network run by our national communications & telecommunications services provider Telstra on VHF High 156 to 170 Mhz used not only by private companies, public transport, utilities like power & watee but all emergency services & with some proprietary Moto gear it provided hours of enjoyable listening & information exchange between like minded radio & scanner enthusiasts that was until the public transport left 1st & went to an encrypted network called GSMR or global systems mobile rail communications, following hot on the heals was the emergency services that went to both a VHF & UHF encrypted Apco 25 network on 420Mhz UHF encrypted N/W & 165 Mhz VHF both encrypted & a "currently" open Tait I & II network. The utilities went to mobile phone & 4G data, I think that there might still be 1 or 2 "private" users on the network but everyone else is gone. Here in Aust there is very little to really listen to as 99% of comms are encrypted with some states & teritories fully encrypted. There's a little bit of Pocsag but not much with the emergency services using a 2 x way encrypted proprietary paging network now. Only approx. 50% of aircraft in Aust use voice now with the other 50% usung about data like Acars, Cpdlc, inmarsat & onenet for all operational communications including landing & take off clearances as well as in flight comms, aviation HF comms is just about dead with only a tiny fraction of what used to be. Shipping is mainly Inmarsat or AIS with a tiny bit of simplex in port VHF comms on 156Mhz just talking to the port authority but you have to be within a handful of km's from the port to really hear anything other than that its jusr leasiure craft & a hand full of fishing trawlers, Marine HF is just about dead. Taxi networks are long gone here in Aust, taxis are now fully deregulated 1/2 of all taxis here in Aust are now ride share, the few taxis that still have radios most are just data terminals with the rest using either Snapchat, Zelo or other PTT service to communicate. The "Taxi Base" is pretty well long since gone you can still ring & get a cab but stats show that only about 2% of cab orders are via a voice call to a national No. Here in Aust with the rest usung other means to order a cab. The company taxis left are connected to an app network & you use an app on your smart phone to order a cab or if you are a regular taxi / cab user with a regular driver you simply call them on their mobile they them selves operate in small fleets or groups from everything from a handul of drivers & cars up to many dozens of drivers & cars so if your regular driver cant do your trip he/ she has one of their fleet / group drivers do the trip, these group / fleet drivers are hand picked for their years of experiance, professionalism, presentation & area knowledge and mostly use mobiles, PTT, or Snapchat to communicate. In general whats left that is still in the clear is pretty boring ( apart from our fire services during the Aust'n summer bush fire season when comms can really liven up.) To the best of my knowledge 99.9% of comms in Aust is digital & all involve some form of trunking network. The ACT ( Australian Capital Territory & the Northern Territory in Aust are 100% encrypted & Tasmania is about to join them in the next 12 monts with our national carrier winning a major comms contract to encrypt the whole island state ( all in the name of Terrorism of course.....😬) All Police forces all around Aust are fully encrypted, most capital ambulance & fire services are either fully encrypted or have the ability at the flick of a switch at a moments notice to be fully encrypted ( not counting the 2 x territories that I have already mentioned where 100% of all comms that are already fully encrypted ) All Australias roads authorities are fully digital & as above at a moments notice and the flick of a swith can be fully encrypted should they think or beleive that the need calls for it. All Australian security services ( alarm response / security patrols) are all 100% mobile phone & txt & or propriety apps for alarm codes etc. 99% of Australias media ( large tv & radio networks ) are encrypted / satellite with the smaller players just using mobile phones. All Australian free to air terrestrial TV is digital thoes out of range of free terrestrial Tv can receive free to air via Satellite on a network called Vast which is encrypted. Some local councils ( the smaller ones ) are still analouge in the clear but are very boring & again with most comms being passed over the mobile phone network, the big capital city councils are digital in some form or another. All Australian airports " operational staff like baggage handlers, check in staff, car parking & security are all 100% digital using various digital networks. The only thing that has never changed world wide with communications is aviation communications, they are the last man standing, they still use AM analouge between 108 & 136 Mhz for voice, data & navigation communications I am lost why it has been the same since WWII & I doubt will ever change. 90% of large shopping centers are digital. Am radio stations are making way for either Fm or DAB A large amount of amateurs now either use DMR or Dstar to communicate CTCSS is gone in Aust Here in Aust we have NXDN but hardley anyone uses it at this stage. So here in Aust for commercial & emergency service comms we mainly use Motobro Turbo Edacs Apco P1 & P2 X2-TDMA Mpt Pocsag DMR LTR Spread spectrum There's vitally no analog worth speaking of left that is worth listening to in Aust. Hope that helps give a little bit of an overview of comms in Aust. Regards Wayne.
Hi Wayne I'm not looking to listen to any comms but I think it would be pretty cool to give a strength reading to a transmitter based on the quick data bursts they give out. What do you think? Do you think there's anything that could give a strength reading to show youre getting closer to the transmitting device? Thanks
I remember those Beeeeee- Bleep, Bleep bleep Bleep tones followed with a voice sayIng the recipients name saying please call (this # phone number). These tones dominated the 1970’s to 80’s VHF band but disappeared in the 90’s.
Lewis it’s not just the police that use Airwave. It is also used by ambulance, fire and lowland search and rescue. It is also extensively used by HM Coastguard, the real 4th emergency service to communicate with the other emergency services as well as with the coastguard search and rescue helicopters. The coastguard also use MF, HF and VHF radios with HF being used as the secondary comms for the helicopters. Also the pagers have all gone from the coastguard with the exception of their VHF channel 0 pagers used in area of poor mobile coverage.
This is so cool! Part two please, this was really useful. You probably know about it but there is a website called "signal identification wiki" which can give you another leg up to finding out what noises you're hearing.
Be aware, there is a rental company out of California that has gotten a massive number of FCC licenses to use with burst transmitters on telephone poles. They have been given licenses in virtually all bands, and many of the frequencies are already licensed to commercial radio companies. They tend to use them in areas of lower population to transmit any information about electrical use to the various electric providers. Despite them being licensed for lower power, they are interfering with various radio communications providers. This is from personal experience.
Excellent video Lewis. My first scanner was the Realistic Pro 32, and most of those signals I come across - thank for for letting us know what they all are.
Fascinating info just found you and subscribed i have 2 baofeng gt 3tp radios i got for Christmas and you seem to have the most knowledge and info about radio usage 😀
This was a very interesting Lewis, thanks for taking the time to research and make this video. I would definitely like to see a part 2. Ideas for signals include APRS on 144.8, SSTV from the International Space Station on 145.8, FT8 on 50.313, and weather stations on 433.92. 73.
Should have had a scanner in the 80's and 90's. There was always something interesting to listen to, I spent many hours listening to my Yupiteru MVT-8000 in those days.
I know there are american radio enthusiast youtubers but man you just go into a certain detail with the RK radio systems that I am really intrigued by. Too bad I dont live there so I cant experience the exact same things.
@@RingwayManchester Yeah the receiving end checks the CRC, discards the packet if it doesn’t check out. Since the packet is repeated multiple times at random spacings, the chances of every single packet colliding with the other tpms sensors is rare. That’s why the chirping you hear has a stochastic kinda pattern to it. I absolutely love your channel, subscribed!!
I scanned PMR for the first time today and I heard lots of users of ham radios pumping out 10watt signals and who all seemed to use naughty words instead of their call signs. Its like CB was in the very early days with all the jargon replaced by words TH-cam has warned me previously not to use ;)
It has been a while, but years ago, I used to hear a sound in the 800's and 900's which sounded like someone keying the mic on a radio constantly at regular intervals. They were a second or so apart, and it was like it wentin to a repeater, because the carrier was constant. Think about the tailsquelch from the receiver when someone lets go of the mic when they are using a repeater. First, you hear the receiver disengage, then the carrier from the repeater continues for a few seconds before you hear the tailsquelch from your own radio. I don't remember the exact frequency, but I heard it on a few different ones, so these might have been images, making the exact frequency pretty much anywhere in the 700 to 1000 mhz area. I'm sure my scanners never picked up images from multiples of the if like some people claimed was possible. Another signal I heard has disappeared since the late 90's, but it was in the upper 460's, and it sounded exactly like the whipping you hear when a helicopter is flying over, but it was constant. These sounds persisted night and day, so it's possible that at least one of them is a signal that was created by my scanner it'sself, but I'm curious about what they are.
I still remembering to the AP Network News on 948.5 Megacycles when I was a child. Then it went to digital and it just sounded like a buzzing. I miss the AP Network News.
I’ve head quite a lot of EVP voices, the most famous (or should I say infamous) being ‘Radio Peter’. A lot of Ham enthusiasts have heard him, apparently he died in 1906 and has been heard on the airwaves since the mid-1970’s
Very interesting, but somewhat familiar to me, especially on my earlier scanners and on amateur radio transceivers in the 1970's and the 1980's before many of the pagers left the air in the 🇺🇸 US on 152 MHz and 454 MHz. Digital cell phones seem less of a problem at higher frequencies, though LTE sometimes causes problems as noted in filters for HD TV and FM. W2CH
I have a question. Can I listen to tetra with my discone if I connect it to my sdr stick or would another antenna be better? With the right software of course. Very clear video!
I have two scanners and old Crystal scanner that I got for Christmas that was in 1984 and one I got my brother in 1995 that's a programmable scanner I hear most of those same things on the it sure is good to know what they are
i heard something that sounded like a broadcast where the original radio audio repeated like in mem leak and the beeping in some of these was randomly placed in the signal we live on our own land with nothing like the products in this it was scary as hell
Very well done video. I'm not sure that Multitone paging is easy to decode. I'm quite skilled with SDR and it's been my experience that there are many pager variants in the 454 and 459 mHz bands and very few respond to decoding software such as PDW and Sorfmon. Am I missing something? Keep up the good work!
At 8:40 - either this or a very similar service is ruining the whole CB band in German from spring to fall, most annoying during summer, it's sitting on frequencies between CB channels and ruining at least two and up to four channels at once. A pity you didn't mention the frequencies they use.
Really cool video. Thank you. You don't see much tetra here in the former colonies - at least to my knowledge. Question: Could you do a video on your RF Explorer? I'm really interested in how you like that device.
This is a video I've wanted for so long but never thought I'd get! I have wondered about the sound at 2:51 for years! I never knew the purpose and could never explain it to people when I asked for answers. Great video and very insightful!
Only just found this video and it was a Eureka moment as I have heard these tones and transmissions for years. Thank you for explaining this to us.
3:55 It’s worth remembering that your car can be stolen this way. For example, a car thief standing outside your home and cloning your keyless entry keyfob through the walls, then repeating the signal to open your car door and even getting the start/stop button to work. When inside your home, keeping your keyfob inside a faraday cage or faraday bag will stop a thief.
This is probably one of the best video's you've done so far. There were a few weird bleeps I've heard in this clip that were a mystery before watching this video, and I've played around with radio kit of some form for most of my life as a kid and an adult. I believe this could be a continuing series of videos with more weird and unknown bleeps heard through the radio spectrum. Brilliantly researched and presented.
Thanks so much mark I appreciate that
You've done it again. Fasinsting and clearly explained as always
Thanks so much mate!!
@@RingwayManchesterplease explain yourself kid..
@@radioVHS149 what are you on about?
As Mike ( comments ) said you must have put a fair bit of effort into that video, research, finding photos, etc. Then making the video itself, you deserve more views ! Well done
Thanks for that mate!
2 years later and this video is still helpful with understanding the meaning of different sounds when scanning. Thanks!
These sounds are always so haunting to me, im not a radio listener or hobbyist but i enjoy your channel! I remember back when my brother and I would use the radio many years ago, i had a phobia of radio static and these noises still creep me out for some reason. I know its all innocuous and normal things now, its just strange to hear all these sounds. Its like an invisible (inaudible) world of machines all shouting at each other and listening to them through a radio receiver is like hearing the sound of a thousand voices screaming all at once....
That Pro32A was my first ever scanner from the days of Tandy
Still playing catch up but loving all of it, thanks again 48-70🇬🇧👍
Heard many of these sounds over the years. Brilliant and informative video. I used to decode pocsag a lot.
Really good Lewis!
Not many videos have gone into this sort of detail.
A part 2 is definitely needed!
Glad you liked it!
The excitement of radio scanning dwindled once mobile phones and emergency services went digital. I still have my old PRO-2004 scanner which used to burst into life around 4pm each weekday with mobile phones.
Great stuff. I love the look of that Realistic Pro-32.
Thanks Paul!
Lewis one of of the best informative videos you have done thank you and keep them coming
Alex M7MEX
Thanks so much Alex
Excellent! Thank you. Back in the early 1970’s I used to hear a deep signal accompanied by s sound that resembled a fog horn on the AM band, late at night. I lived in the US at the time. California Bay Area, near the Pacific Ocean. Never figured out what it was.
That was the mysterious "foghorn", heard at various shortwave frequencies and sometimes even on the AM broadcast band. I don't think it was ever identified; probably some sort of channel marker for spies.
Thanks Lewis
Great Video.
Here in Aust we used to have a huge SMR ( State Mobile Radio) network run by our national communications & telecommunications services provider Telstra on VHF High 156 to 170 Mhz used not only by private companies, public transport, utilities like power & watee but all emergency services & with some proprietary Moto gear it provided hours of enjoyable listening & information exchange between like minded radio & scanner enthusiasts that was until the public transport left 1st & went to an encrypted network called GSMR or global systems mobile rail communications, following hot on the heals was the emergency services that went to both a VHF & UHF encrypted Apco 25 network on 420Mhz UHF encrypted N/W & 165 Mhz VHF both encrypted & a "currently" open Tait I & II network.
The utilities went to mobile phone & 4G data, I think that there might still be 1 or 2 "private" users on the network but everyone else is gone.
Here in Aust there is very little to really listen to as 99% of comms are encrypted with some states & teritories fully encrypted.
There's a little bit of Pocsag but not much with the emergency services using a 2 x way encrypted proprietary paging network now.
Only approx. 50% of aircraft in Aust use voice now with the other 50% usung about data like Acars, Cpdlc, inmarsat & onenet for all operational communications including landing & take off clearances as well as in flight comms, aviation HF comms is just about dead with only a tiny fraction of what used to be.
Shipping is mainly Inmarsat or AIS with a tiny bit of simplex in port VHF comms on 156Mhz just talking to the port authority but you have to be within a handful of km's from the port to really hear anything other than that its jusr leasiure craft & a hand full of fishing trawlers, Marine HF is just about dead.
Taxi networks are long gone here in Aust, taxis are now fully deregulated 1/2 of all taxis here in Aust are now ride share, the few taxis that still have radios most are just data terminals with the rest using either Snapchat, Zelo or other PTT service to communicate.
The "Taxi Base" is pretty well long since gone you can still ring & get a cab but stats show that only about 2% of cab orders are via a voice call to a national No. Here in Aust with the rest usung other means to order a cab.
The company taxis left are connected to an app network & you use an app on your smart phone to order a cab or if you are a regular taxi / cab user with a regular driver you simply call them on their mobile they them selves operate in small fleets or groups from everything from a handul of drivers & cars up to many dozens of drivers & cars so if your regular driver cant do your trip he/ she has one of their fleet / group drivers do the trip, these group / fleet drivers are hand picked for their years of experiance, professionalism, presentation & area knowledge and mostly use mobiles, PTT, or Snapchat to communicate.
In general whats left that is still in the clear is pretty boring ( apart from our fire services during the Aust'n summer bush fire season when comms can really liven up.)
To the best of my knowledge 99.9% of comms in Aust is digital & all involve some form of trunking network.
The ACT ( Australian Capital Territory & the Northern Territory in Aust are 100% encrypted & Tasmania is about to join them in the next 12 monts with our national carrier winning a major comms contract to encrypt the whole island state ( all in the name of Terrorism of course.....😬)
All Police forces all around Aust are fully encrypted, most capital ambulance & fire services are either fully encrypted or have the ability at the flick of a switch at a moments notice to be fully encrypted ( not counting the 2 x territories that I have already mentioned where 100% of all comms that are already fully encrypted )
All Australias roads authorities are fully digital & as above at a moments notice and the flick of a swith can be fully encrypted should they think or beleive that the need calls for it.
All Australian security services ( alarm response / security patrols) are all 100% mobile phone & txt & or propriety apps for alarm codes etc.
99% of Australias media ( large tv & radio networks ) are encrypted / satellite with the smaller players just using mobile phones.
All Australian free to air terrestrial TV is digital thoes out of range of free terrestrial Tv can receive free to air via Satellite on a network called Vast which is encrypted.
Some local councils ( the smaller ones ) are still analouge in the clear but are very boring & again with most comms being passed over the mobile phone network, the big capital city councils are digital in some form or another.
All Australian airports " operational staff like baggage handlers, check in staff, car parking & security are all 100% digital using various digital networks.
The only thing that has never changed world wide with communications is aviation communications, they are the last man standing, they still use AM analouge between 108 & 136 Mhz for voice, data & navigation communications I am lost why it has been the same since WWII & I doubt will ever change.
90% of large shopping centers are digital.
Am radio stations are making way for either Fm or DAB
A large amount of amateurs now either use DMR or Dstar to communicate
CTCSS is gone in Aust
Here in Aust we have NXDN but hardley anyone uses it at this stage.
So here in Aust for commercial & emergency service comms we mainly use
Motobro
Turbo
Edacs
Apco P1 & P2
X2-TDMA
Mpt
Pocsag
DMR
LTR
Spread spectrum
There's vitally no analog worth speaking of left that is worth listening to in Aust.
Hope that helps give a little bit of an overview of comms in Aust.
Regards
Wayne.
Thanks for taking the time to give that info!
My home town of Sheffield in GB the 2m band is used mainly on digital I now talk to no one any more 2e0dre
Hi Wayne
I'm not looking to listen to any comms but I think it would be pretty cool to give a strength reading to a transmitter based on the quick data bursts they give out.
What do you think?
Do you think there's anything that could give a strength reading to show youre getting closer to the transmitting device?
Thanks
I remember those Beeeeee- Bleep, Bleep bleep Bleep tones followed with a voice sayIng the recipients name saying please call (this # phone number). These tones dominated the 1970’s to 80’s VHF band but disappeared in the 90’s.
Yeah I remember those too in the 80s, as well as a woman's voice breaking in from time to time saying "Call the exchange please call the exchange"
Thanks for the information,…. Watching from Kentucky “The Bluegrass State “ USA 🇺🇸
Lewis it’s not just the police that use Airwave. It is also used by ambulance, fire and lowland search and rescue. It is also extensively used by HM Coastguard, the real 4th emergency service to communicate with the other emergency services as well as with the coastguard search and rescue helicopters. The coastguard also use MF, HF and VHF radios with HF being used as the secondary comms for the helicopters.
Also the pagers have all gone from the coastguard with the exception of their VHF channel 0 pagers used in area of poor mobile coverage.
This is so cool! Part two please, this was really useful. You probably know about it but there is a website called "signal identification wiki" which can give you another leg up to finding out what noises you're hearing.
Be aware, there is a rental company out of California that has gotten a massive number of FCC licenses to use with burst transmitters on telephone poles. They have been given licenses in virtually all bands, and many of the frequencies are already licensed to commercial radio companies. They tend to use them in areas of lower population to transmit any information about electrical use to the various electric providers. Despite them being licensed for lower power, they are interfering with various radio communications providers. This is from personal experience.
Excellent video Lewis. My first scanner was the Realistic Pro 32, and most of those signals I come across - thank for for letting us know what they all are.
Nice one!
Brilliant video, have been mucking about with scanners since I was a kid and always wondered what the digital noises were.
Fascinating info just found you and subscribed i have 2 baofeng gt 3tp radios i got for Christmas and you seem to have the most knowledge and info about radio usage 😀
Thanks mate!
@@RingwayManchester any time mate i look forward to using your vids to help me get on to the ham radio scene🙂
Excellent, I did enjoy this video, with many more to look at. thank you again ❤❤😃😃🧐😎
Very well covered & easy to understand explanations of the common signals found on the wideband ranges.
This was a very interesting Lewis, thanks for taking the time to research and make this video. I would definitely like to see a part 2. Ideas for signals include APRS on 144.8, SSTV from the International Space Station on 145.8, FT8 on 50.313, and weather stations on 433.92. 73.
Thanks for the idea!
Good informative video Lewis,please keep the videos coming .More of these strange signals would be welcome.
More to come!
Should have had a scanner in the 80's and 90's. There was always something interesting to listen to, I spent many hours listening to my Yupiteru MVT-8000 in those days.
If only mate. I missed out big time
@@RingwayManchester It's a real shame, now everything's digital there's nothing interesting to listen to.
You've just solved a mistery that has been bothering me since 1989
I know there are american radio enthusiast youtubers but man you just go into a certain detail with the RK radio systems that I am really intrigued by. Too bad I dont live there so I cant experience the exact same things.
Still have my Yupiteru MVT-7100.. Regularly power it up for a listen when I'm bored. Brilliant piece of kit.
Excellent Presentation
Thank you! Cheers!
THAT WAS BRILLIANT. You must put hours and hours into research.
Thanks Mike!
Great video. Thanks
Glad you liked it!
Great video, I hear so many odd noises. I have DPMR working well with SDR# and DSDplus
Thanks for sharing!
Great video! Interesting even though I’m in the US. If you visit you should bring your scanners and do a video on US radio spectrum.
That's a great idea!
11:01 this tone rings bells
I agree with all the reviews. I knew what most of the sounds were.
Brilliant informative video. I’ve heard a good few of them sounds but didn’t have a clue what most were. M7BCN
Glad it was helpful!
Really interesting and well researched. This channel just gets better and better!
Thanks very much mate that means a lot
Whats cool about tpms, is that the packet is sent multiple times at random spacings to deal with collisions from other sensors.
I had no idea cheers!
@@RingwayManchester Yeah the receiving end checks the CRC, discards the packet if it doesn’t check out. Since the packet is repeated multiple times at random spacings, the chances of every single packet colliding with the other tpms sensors is rare. That’s why the chirping you hear has a stochastic kinda pattern to it. I absolutely love your channel, subscribed!!
@RingwayManchester >>> Great video...👍
Great video Lewis thanks for making and posting 👍
Glad you enjoyed it
Very interesting stuff. I've heard some signals in my area on my SDR but not much. I want to go to a large city and listen there for stuff.
Oh Lewis lots of Pops and squeaks up here on the 17th floor ive always wondered what these bursts of data were for.
Marc in Bletchley Towers G6XEG
Scanning PMR446 today I heard what sounded like Morse code on channel 16 . Never heard it before.
I scanned PMR for the first time today and I heard lots of users of ham radios pumping out 10watt signals and who all seemed to use naughty words instead of their call signs. Its like CB was in the very early days with all the jargon replaced by words TH-cam has warned me previously not to use ;)
Not had the scanner out in years. Suppose my RSP1a has made it redundant, somewhat, though it’s not as portable.
Thank you very interesting informative well done
It has been a while, but years ago, I used to hear a sound in the 800's and 900's which sounded like someone keying the mic on a radio constantly at regular intervals. They were a second or so apart, and it was like it wentin to a repeater, because the carrier was constant. Think about the tailsquelch from the receiver when someone lets go of the mic when they are using a repeater.
First, you hear the receiver disengage, then the carrier from the repeater continues for a few seconds before you hear the tailsquelch from your own radio.
I don't remember the exact frequency, but I heard it on a few different ones, so these might have been images, making the exact frequency pretty much anywhere in the 700 to 1000 mhz area. I'm sure my scanners never picked up images from multiples of the if like some people claimed was possible.
Another signal I heard has disappeared since the late 90's, but it was in the upper 460's, and it sounded exactly like the whipping you hear when a helicopter is flying over, but it was constant.
These sounds persisted night and day, so it's possible that at least one of them is a signal that was created by my scanner it'sself, but I'm curious about what they are.
very informative video
Glad you liked it thanks!
I still remembering to the AP Network News on 948.5 Megacycles when I was a child. Then it went to digital and it just sounded like a buzzing. I miss the AP Network News.
Excellent, added to my general knowledge of radio signals across the bands.
Glad it was helpful!
@@RingwayManchester Yup, so many different signals out there and good to have an idea of what is what as you come across them. 73 de GW8TVX
Another very informative video.
Glad you enjoyed it
I’ve head quite a lot of EVP voices, the most famous (or should I say infamous) being ‘Radio Peter’. A lot of Ham enthusiasts have heard him, apparently he died in 1906 and has been heard on the airwaves since the mid-1970’s
The inventor of P.C.M. was an EVP researcher
Alec Reeves
Where can I find more information about this because nothing comes up otherwise
@@Lunar_Capital sorry we're you replying to me about Alec Reeves ?
@@charlesloukas5909
No, no. I was replying to Pork Williams. Lol
Nice one Lewis 👍
Thanks 👍
Very interesting video, has answered a few questions.
Glad it was helpful!
Another great informative video Lewis.. often wondered what some of the noises are...👍
Thanks 👍
7:50 sounds like a guinea pig skittering in its cage
Excellent video ! Keep making videos !!!
Brilliant video. Love to hear another set of strange noises.
Bardzo dobre, bardzo merytoryczny film, ale takich sygnałów jest dużo więcej
Thank you! Yes there is
Brill video I have just had a unidon 125 scanner so very helpfully to me well done many thanks
Glad it helped
Very interesting, but somewhat familiar
to me, especially on my earlier scanners
and on amateur radio transceivers in the
1970's and the 1980's before many of the pagers left the air in the 🇺🇸 US on 152 MHz and 454 MHz. Digital cell phones
seem less of a problem at higher frequencies, though LTE sometimes causes problems as noted in filters
for HD TV and FM. W2CH
multi-tone paging is not decodable btw. no decoders exist in the non commersial space ast the moment
Thank you so much for taking the time to make and post this neat and informative video..... LM
I have a question. Can I listen to tetra with my discone if I connect it to my sdr stick or would another antenna be better? With the right software of course.
Very clear video!
Conventional tetra yes, police tetra no
Thanks Lewis, really interesting video :)
Please do more of these
Great Video Bro.
Glad you liked it
Is TETRA equivalent to APCO P25 here in the US?
Erm, not really it’s another digital mode. I’ll cover p25 in part 2.
I have two scanners and old Crystal scanner that I got for Christmas that was in 1984 and one I got my brother in 1995 that's a programmable scanner I hear most of those same things on the it sure is good to know what they are
Very good video
Thanks for the visit
Very very interesting. Thank you!
I'd love to see more of these videos chap!!
6pm tomorrow part 2 is up :)
I was looking at what that scanner was scanning it looks like British CB frequencies are different from American CB frequencies?
To be honest, I find digital signals a lot more interesting than regular transmissions.
Very good video.
Thank you very much!
Flippin' sweet video man
Yeah i did enjoy that one it was very interesting. Nice one mate
Glad you enjoyed it
i heard something that sounded like a broadcast where the original radio audio repeated like in mem leak and the beeping in some of these was randomly placed in the signal
we live on our own land with nothing like the products in this it was scary as hell
none of the signals from this match more then 25% roughly
Very well done video. I'm not sure that Multitone paging is easy to decode. I'm quite skilled with SDR and it's been my experience that there are many pager variants in the 454 and 459 mHz bands and very few respond to decoding software such as PDW and Sorfmon. Am I missing something? Keep up the good work!
Trying using CubicSDR, I couldn’t get SDR Sharp to work with PDW, some sort of audio filtering
You’ll need raw audio from the discriminator to decode properly. Had the same issue here in the US.
👍 very interesting.
Add 902 for the car remotes in the US... Shits annoying as hell
At 8:40 - either this or a very similar service is ruining the whole CB band in German from spring to fall, most
annoying during summer, it's sitting on frequencies between CB channels and ruining at least two and up to four channels at once.
A pity you didn't mention the frequencies they use.
Absolutely Brilliant! What frequencies do permanent traffic lights use to communicate via those little grey aerials? Cheers, David Walsh.
Another interesting video buddy, nicely done.
Brilliant video
Really cool video. Thank you.
You don't see much tetra here in the former colonies - at least to my knowledge.
Question: Could you do a video on your RF Explorer? I'm really interested in how you like that device.
I'll do a video on it eventually :)
Very interesting thanks for taking the time
Great content Lewis 👍👏👏
Thanks mark
Great video now I know all of those noises I hear
Glad I could help
Great video! 😀
It used to be fantastic listening to scanners and to short wave but times have changed.
Are there any programs to decode multitone paging?
I have a SDR Play RSP DX which Covers 1 Khz to 2 Ghz I Use it with SDR Angel Software and SDR Uno!
Sounds like machine gun fire at MCR airport?
I live near two pocsag paging antennas, did not know that you can hear them without an antenna, ill have to go see what i can hear