No Lathe Bowl with Kutzall Discs
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2022
- No lathe bowls are cool to carve as they can be any shape you want, I use kutzall discs on a angle grinder to show you what they are able to do. This is a first impression review of the kutzall disc and dish shapes.
For more videos on kutzall burrs check this playlist • Kutzall Burrs
KUTZALL BURRS AND DISCS 5% Discount Use the code (Case sensitive)- MATTCARVES website: kutzall.com?aff=70
Music supplied by Artlist
Disclaimer: Some of these links for purchasing are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] รอบชิงชนะเลิศ "เทนนิส พาณิภัค" ไทย vs จีน Guo Qing เทควันโดหญิง 49kg | โอลิมปิก 2024](http://i.ytimg.com/vi/xgvTIdE8j3U/mqdefault.jpg)
Very nice!
Love the shape😃
Really excited youve made a video working with these kutzall products! I literally just had my very coarse concave disc shipped to me last week and arrived over the weekend. I've already busted it out and grinded on some claro walnut. I've made 6 little bowls already.
Phenomenal discs, absolutely.
Matt, thank you for sharing your work! Always a good day seeing that you've uploaded some fresh work!
Beautiful piece!
Thanks for watching. Yeah I think you get what you pay for. They are really good and easy to control. Stay tuned my next video is carving a mushroom with them👍
Wow!!!
Matt, the bowl is beautiful this shows the control that you have in your hands. cheers and enjoy carving also thank you for the share. Best regards, Amit🙏
Cheers Amit. Thank you for watching and commenting. Hope you are having a great day.🙂
Great video Matt, always very informative. Lovely bowl!
Cheers Christine
Fantastic thanks Matt
Very well done, thanks!
Ah pooh, came in for the end! Have to rewatch but that's no hardship! I was watching the first vid from Jonas Olson in two years, amazing creative carver!
Coil will check out that channel. Hope your carving a lot?
Ah yes I remember now. That is a cool dragon
Lovely bowl too Matt! I've got a silicone mushroom commission before i can carry on with my dragon, i'll send pics !
Astonishing tool !!!
Beautiful piece! Well done sir!
Cheers Chris. Have you taken a break from youtube?
@@MattCarves not on purpose lol. Just been pretty busy with life stuff lately. I am hoping to get back at it soon!
Great job!
Seems kutzall makes some nice choices in woodworking products
Yeah. I love their tools
STUNNING!!!
Cheers Steve 👍
Love your work sir
Many thanks 👍🙂
Nice bowl 👍👍👍. Those disks look good for removing alot of material. Thanks for the info on the bandsaw, I got one and my work load has dropped alot, next is scroll saw and belt sander. Keep up the good work.
cool, good to hear you get a bandsaw, they are real time savers for cutting wood down.
cheers for watching.
So cool brro. What a talented guy.
Cheers Reuben.
Now I need those!
😅👍
Wow. Such an awesome job. But dang it, you've now made me want to buy a new tool! I've always wanted to carve bowls and thought I HAD to have a lathe... or go caveman and use an adze.
Thank you for educating me.
New subsriber here.
I have a feeling I'm gonna love your content!
Cheers Tim. I got no room for a lathe either.
Matt, I would love to see as I have 3 kutzall shaping discs 🙂.. I have done very little work with those discs.. looking forward to this video..thank you
Well you have one more disc than I do. 😆. What have you done with them so far?
@@MattCarves to be honest started making a bowl in a boat shape like how u did ....it's incomplete
Brilliant video simply explaining it all off to do a bird bath with copper tube pedestal
Cheers Alex, good luck with the birdbath 👍
@@MattCarves many thanks, i have the 1/4 inch shank sphere original fine have used it on a sculpture ball is about 1 inch round and easily sands out roughness from extreme coarse to probably around 80 grit im not sure exactly but worth the money for sure. Many thanks
@@alexnicanovich3636 Cool that good to hear. I just bought a fine kutzall shaping disc
Thank you!
You're welcome!
That was an amazing video, and a really nice shaped bowl. I've started using Kutzall discs for carving various shapes but still struggling to sand the grooves left behind especially in the tight spots! What methods did you use to finish the bowl as it looks super smooth at the end.
Yeah that is a tough one. I have been using the arbortech contour sander, but I haven't decided if it's good yet. I did use a small 20mm disk attached to the dremel as well. I will have to make some more next year to find a good method, it's a tricky one.
Matt, thanks for this excellent video. I have a scrap piece of merbau (290 x 650 x 42) that I'd like to make into a cutting/serving tray for cheese, olives, etc. I'd like to gouge out deep wells to hold dips and/or nibbles and to make the piece lighter. How do these Kutzall cutters work on hardwood?
Can't really say how the kutzall discs will go in hard wood. Probably OK if your doing a shallow tray.
Great video. Just found your channel while researching carving discs. The wood looks to be very dry. Did you seal both ends with paint or glue to keep it from cracking and splitting while drying? Just curious. Keep up the good work.
A friend gave me that wood, it was painted on the ends. Welcome to the channel 👍
Did you ever make the video about the next step ? smoothing, finishing, etc. Thanks
not exactly, but check this video out where I show the whole process th-cam.com/video/gDy05RUdW6U/w-d-xo.htmlsi=XGUpnUNvZmBibC1k
@@MattCarves Thank you !
Thank you forthe video. Can I skip the middle coarse disk and use the original extreme with original smooth only?
Yes I reckon that would work. It works with the dremel kutzall burrs 👍
HI, thank you for the video. What do you think skipping the middle coars disc and use the smooth after the very coarse disc?
That's the way I would go if I was doing a lot of bowls. I tend to do that with the dremel kutzalls
What thinkness is your wood
Great video, I'm a long time woodworker keen on getting into some power carving, I have a 125mm ×22mm anglegrinder, would these disc's be compatible as far as you know?
I run mine on the GA5040C 125mm (5") 1400W Variable Speed Angle Grinder M14.
Probably best to check the website as I am only familar with the formats in New Zealand.
Cheers for Watching
This looks beautiful Matt, what wood is this ? I haven't had a chance to go around the saw mills for a good wood as we don't have lumber yard like in the NZ or the US and this DIY trend has not still hit our shores that much .... thank 🙏you enjoyed watching and learnt a lot from it 😊
The wood I believe is Oregon also known as douglas fir. I hope you can find some wood soon. Thank you for watching and commenting
@@MattCarves thank you Sir for sharing your talent🙏
great video and very nice piece, but how long did it take for this piece ??!
Cheers. It took about a day with filming. 👍
Wow
Hey Matt, what kind of table/clamp vice are you using. What do you call that thing you clamp the bowl with?
Hi. I am using the triton superjaws XXL. For clamping. Cheers for watching 👍
Thank you and thanks for the videos. They are super useful, informative, clear and worth a mint. Cheers@@MattCarves
Hey mate, Looks like the affiliate link isn't quite working. If you look at video description, the '?aff=70' isn't lit up as part of the hyperlink. One day I'll get a proper Kutzall disc - settled for the offbrand trademe version for now!
Im not sure why it is doing that the blue part works anyway. Yeah those kutzal discs are expensive. not sure if you know you can get them from carbatec in Auckland or Christchruch thats where I get most of my burrs from.
@@MattCarves PS I really like your works!! Thanks heaps for the advice/inspiration
How did you treat it to avoid cracks?
This wood has been dried for many years, so pretty unlikely to crack.
How long does this kind of disc last when u use it frequently?
Have not used it frequently enough to make that call, I know the kutzall dremel burrs last me about 1 year. However these questions are hard to answer as everyone carves different woods and has different styles of carving. Cheers 👍
What tool did you sand the inside with?
I go into sanding on this video th-cam.com/video/gDy05RUdW6U/w-d-xo.htmlsi=KAdSydJy_B7wKDSR
How thick is the wood for the bowl it looks like 2 inches
Started off at 2.5 inches approx
como eu faço para conseguir um disco de desbaste desse
I would google search for a local stockist to wherever you live. Or you can buy them online from kutzall in USA( shipping would be expensive though) See the description to that video. Cheers 🍻
Ok obrigado pela dica meu amigo
How much time consume in one piece
About 5hrs but I'm filming as well.
@@MattCarves i learn lots of things after watching your videos
Is a cedar?
That wood is Oregon. 👍
it seems to be a very soft and stable wood. Here in Brazil we have many species, I work with some very hard ones and for carving I use a saw with a dimmer.
The most common species here are: Angelin, Roxinho, Muiracatiara, Canela, etc.
What woods do you use?
@@bruceviana2377 yeah I have never heard of those woods. I carve in black walnut, pine, macrocarpa and any other wood I can get my hands on. Cheers for watching and commenting 👍