I was ready to pull the trigger on a Baileigh 33 ton press. I'm just not sold on their controller and the limited storage for recipes. How many programs can this controller hold and can it be backed up with a memory card?
Hello, Its been 2 months since you got this machine. Does it work ok? Have you had any problems. I am looking to buy a couple of machines from this guys but I would like to know if you have any feedback on the machine? Any advice you can give me I would be really appreciated.
You wouldn't need to do so much correcting if you changed the material thickness to what you're actually bending. It looks like you had it set to .039" the whole time. Thanks for the demo though!
yea, if you load the right tooling geometry and material thickness, it will get you a closer starting point. As i said, I am not an experienced cnc press brake operator
The dies are segmented, how would you bend a box that was not the exact measurements of the segmented section. Say the box is 20 x 20 with a 1 inch flange. The segments would need to be less than 20 inches to not bend the 2 side flanges. If the segments aren't 20 could you do less like 18 and still get a good bend?
you have lots of different segment widths so you can mix/match to get the desired width, and yes, if you need to space them out with some small gaps, it wont be a problem at all.
Very nice Gary: Thanks for showing, I would like to have something like that in the future in my shop, no real need presently but hey I love tools and equipment.
oh yea, handy to have around for sure, when you get ready for one holler at me, i could bring it out to you, help you get it going and a little walk through training
there is an admin screen thats password protected where you enter it. Yes there is a complete tooling catalog available. US tooling company like Wilson also has tooling that will work with it
Yes, its about 8-9 months old. If you have followed me long, i dont keep machines very long, lol. I had 3 plasma tables in 3 years. Nothing wrong with it, just getting a larger machine.
Do you offer financing for businesses?
In the video it has no end guards and electrical box in the video. ?????
I was ready to pull the trigger on a Baileigh 33 ton press. I'm just not sold on their controller and the limited storage for recipes. How many programs can this controller hold and can it be backed up with a memory card?
Looks like a wonderful machine
yea they are good machines, well built
Looking to import one in the Uk... any recommendations on who to deal with?
Thanks!
So you are going to have a press conference. Cool.
lol touche!
Hello, Its been 2 months since you got this machine. Does it work ok? Have you had any problems. I am looking to buy a couple of machines from this guys but I would like to know if you have any feedback on the machine? Any advice you can give me I would be really appreciated.
You wouldn't need to do so much correcting if you changed the material thickness to what you're actually bending. It looks like you had it set to .039" the whole time. Thanks for the demo though!
yea, if you load the right tooling geometry and material thickness, it will get you a closer starting point. As i said, I am not an experienced cnc press brake operator
The dies are segmented, how would you bend a box that was not the exact measurements of the segmented section. Say the box is 20 x 20 with a 1 inch flange. The segments would need to be less than 20 inches to not bend the 2 side flanges. If the segments aren't 20 could you do less like 18 and still get a good bend?
you have lots of different segment widths so you can mix/match to get the desired width, and yes, if you need to space them out with some small gaps, it wont be a problem at all.
Very nice Gary: Thanks for showing, I would like to have something like that in the future in my shop, no real need presently but hey I love tools and equipment.
oh yea, handy to have around for sure, when you get ready for one holler at me, i could bring it out to you, help you get it going and a little walk through training
You are a pretty good salesman Gary. Hope this venture goes well for you...
I will say, this machine is already sold! I should have had a career in sales! lol
How do you enter in the tooling. Also custom tool?
there is an admin screen thats password protected where you enter it. Yes there is a complete tooling catalog available. US tooling company like Wilson also has tooling that will work with it
@@turbocobra awesome. Can you show a video on entering in a new stock tool and one that is 100 percent custom.
Hey my friend, I have a question, are you the marketing manager or the sales manager :), Good stuff glad to see you doing good stuff
Are you selling the shop laser? I thought it was farly new for you.
Yes, its about 8-9 months old. If you have followed me long, i dont keep machines very long, lol. I had 3 plasma tables in 3 years. Nothing wrong with it, just getting a larger machine.
@@turbocobra Gary if you're still up, watch Counting Cars and see if recognize anything. On History channel.
Can you add different tooling in the control? Can you set a bend speed? Can you set a mute point or slow down point? Thanks
Yes you can put in custom tooling, bend speed i am not sure of but i think so.
Sweet!
the machine is nice, but the speaker is more handsome and charming, haha
you are too kind sir