ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
[EVA and cork] Fix all damage to rod grips
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- We have repaired the grips of the rods.
EVA [dents, scratches, and shine] and cork [stains and missing eyes] have been repaired.
0:00 Opening
0:25 Grip condition
0:34 Masking
1:28 Filing of grips
2:32 EVA dent repair (with unnecessary slow motion)
3:34 Finish cleaning
3:49 EVA finish condition
4:09 Fixing cork bleed-through 1 *failure
5:30 Fixing cork missing joints 2 *subtle failure
5:50 Tips for preserving one-component adhesives
6:10 Putty polishing
6:57 Finishing putty
7:04 Recommendation of putty
7:34 Completion
7:55 Afterword
8:11 Next
#EVA
#cork
#griprepair
Song: Razihel - Love U [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/loveu
Watch: • Razihel - Love U | Jer...
過去の動画で使用したダイソーのウッドパテがコスパ最強でした
th-cam.com/video/gBqFGuJty-k/w-d-xo.htmlsi=8z9izpdWkLh5b8Go
사포(360)로 연마하는 것은 생각도 못했던 것인데 좋은 아이디어 감사합니다🙏 손상된 eva에 해봐야겠어요👍
(한글 자막 감사합니다!)
댓글 감사합니다.
깨끗해져요 😊
끓는 물을 부으면 찌그러진 부분도 고쳐집니다❗️
Excelente vídeo , un gran saludo desde La Costa de la Muerte , Galicia , España
Gracias por el cumplido.😊
Esperamos poder trabajar con usted en el futuro.❗️
Love the job on the EVA, but what about the rod blank underneath the EVA . Isn’t dangerous to pour boiling water on it? I’ve always knew that carbon fiber is highly sensible to heat.
Keep on the good job . Greetings 🙏
The surface of the carbon rod is coated with either epoxy or urethane.
Both epoxy and urethane are heat resistant to over 100°C.
Carbon's heat resistance is much higher, so it can be used in boiling water👍
But it cannot withstand the temperature of fire.
Can you please make a video on how to fix drag cap of shimano reel ? I have a nexave. I think ultegra has same mechanism of drag cap as the nexave.
Thank you for your comment.
In this video I am disassembling and assembling it.
th-cam.com/video/wJcH3hRqweA/w-d-xo.htmlsi=4oJhAxYdP0E5MCPf
I think COMPLEX has the same structure.
@@GENCHI_Fish I tried assembling but the sound doesn't come. There is a spring and a small plastic piece, if I keep the plastic piece simply over the spring the sound doesn't come. I made lots of adjustments and then I got the sound for increase in drag not for decrease
@@fishingislife34
If you have a big spring in the center and a small spring and a small plastic part on the side, the sound will be made.
Make sure that the pin that holds the last large plastic part is in the groove.
@@GENCHI_Fish all the parts are intact right now but the position of plastic piece(round shape peice with a tip rising up from it) placed in such a way that both back and forth is clicking. Only the front clicks for me I don't know why
@@fishingislife34
I don't know.
Sorry😔