It's easy to get. But it does end up getting expensive. The resin itself is just a fraction of the cost. Molds get really expensive. Plus all the findings, etc.
Oh...what she didn't say here...black is extremely hard to cure. I have had some BAD experiences! If I had done this, I would have just added a VERY small amount at a time, probably curing that at least three times as I went. And cured it again on the opposite side each time, also. Otherwise... you'll get a bad mess. Black does not cure if you pour much over 1/16 of an inch at a time.
@@prisyapq I have been doing resin for several years. Obviously not a professional. But I hate to see others make the same mistakes that I have had to learn from. 🙂. As far as cleaning my molds, it depends on what I have been doing. Usually all I need is just a piece of masking tape to gently pick up excess glitter or resin. But if I have been using powders that adhere to the molds, a bath in just liquid hand soap and water is needed. I make sure they are rinsed well. Then air dry. I'm not sure what you are referring to for mixing tools. I like the three-piece set of metal ones. They all have plastic "bulbs" at the top. If you get colored ones, resin over them or the color will disappear. The one is a flat end for mixing, etc. Another has a pointed end. I use it mainly for cleaning out resin in small areas. The third has a small scoop. Invaluable for glitter and powders. As well as many small measurements. If you have those, I clean mine with rubbing alcohol. Normally I use 99%. But now, that's almost impossible to get. Hospitals need it. It's also good for cleaning brushes, wooden stirring sticks, etc. Have I answered your questions?
I did forget to tell you that alcohol will dry out and ruin good brushes. For good ones, I have heard that they should be cleaned with a good gel polish cleaner. I just buy cheap brushes off of eBay and replace them as needed.
You are very talented. I love you videos, but your music is irritating. Can you play something that is not repetitive. Like some calm and soothing music. Art is suppose to be relaxing.
So beautiful and neatly done ❤
STUNNING GOLD & BLACK EARINGS!!!
Complimenti per i video! Intuitivi, chiari, precisi! Lavori molto belli!
いつも美しい作品でうっとりしてます。ステキ…
Very elegant ❤️❤️❤️❤️❤️
私の好きな🔴赤……良いですね。
そして⚫️黒とのマッチング。
大人の色気を感じる色合いで
パーティー等につけていきたいです🙂
Love watching your creative ideas. So talented💕
Thanks for your video. It has helped think of other ways of making jewelry. Your jewelry is amazing. I love it..
VERY SUCCESSFUL DESIGN!
Krei.. you are giving me nice ideas. Thank you love😘
absolutely beautiful...such talent :)
So very pretty 😍 I appreciate it when you show a diagram showing how much resin to add, thanks 🙏
Amazing work 🥰
Very beautiful♥️♥️
Love them! Thanks for sharing :)
I made a similar pendent piece where the flower part has black background, and the out side is clear.
Beautiful 😍
主さんのドライフラワー作品いつも色味が素敵で見てしまいます(*´ω｀*)更新楽しみにしておりますv
Parabéns 👏
stunning 😍
Love your videos!!!!
You are truly amazing!! Love this.
Lindo 😍.
Essas flores são artificiais .?
Very beautifull thanks ♥
BEAUTIFUL!!!!!!
Precioso!
Bravissima 👏👏👏 ma chi usa la resina bicomponente (A+B) la può asciugare con la lampada UV?
Delicadamente hermosoooooooooo👏👏👏👏👏👏👏😘🎂
硬化時間短めだと思うんですよね…なのに何でそんなに綺麗にできるのか不思議。自分の場合、気泡は出るは直すと墓穴掘るはでウギャーってなります😂動画見て勉強します👊
ありがとうございます。
硬化時間は扱っているUVレジンとUVライトとの相性があるために、あってない場合はなかなか上手くいかない時があります。
気泡について、本チャンネルの収録も練習、失敗、再練習の繰り返しなので、あまり気を落とさずに。
where did you learn it
Me encantó, precioso!!!
Beautiful 🌹😍😍😍🌹
I've noticed that you have a lot of these flowers in different colors. Do you dye them? If so, I would love a video showing you doing that.
Hi,flowers were dyed with colour when bought at flower shop, and dried at home by hanging upside down.Thank you.
@@KreiArt Thank you. I wish I knew how to dye them. If anyone reading this knows what to use for dyes, please let me know.
Now I wish I had resin.
It's easy to get. But it does end up getting expensive. The resin itself is just a fraction of the cost. Molds get really expensive. Plus all the findings, etc.
Is it strong enough to use resin to hold the ring & earring stud?
Yes. But you have to make sure it's well covered entirety.
Oh...what she didn't say here...black is extremely hard to cure. I have had some BAD experiences! If I had done this, I would have just added a VERY small amount at a time, probably curing that at least three times as I went. And cured it again on the opposite side each time, also. Otherwise... you'll get a bad mess. Black does not cure if you pour much over 1/16 of an inch at a time.
@@jaykb6587 Noted! Thanks a lot. I'm a newbie for this uv resin. Can you share me, how to clean your mold & brush/stick that have uv resin on it?
@@prisyapq I have been doing resin for several years. Obviously not a professional. But I hate to see others make the same mistakes that I have had to learn from. 🙂. As far as cleaning my molds, it depends on what I have been doing. Usually all I need is just a piece of masking tape to gently pick up excess glitter or resin. But if I have been using powders that adhere to the molds, a bath in just liquid hand soap and water is needed. I make sure they are rinsed well. Then air dry. I'm not sure what you are referring to for mixing tools. I like the three-piece set of metal ones. They all have plastic "bulbs" at the top. If you get colored ones, resin over them or the color will disappear. The one is a flat end for mixing, etc. Another has a pointed end. I use it mainly for cleaning out resin in small areas. The third has a small scoop. Invaluable for glitter and powders. As well as many small measurements. If you have those, I clean mine with rubbing alcohol. Normally I use 99%. But now, that's almost impossible to get. Hospitals need it. It's also good for cleaning brushes, wooden stirring sticks, etc. Have I answered your questions?
I did forget to tell you that alcohol will dry out and ruin good brushes. For good ones, I have heard that they should be cleaned with a good gel polish cleaner. I just buy cheap brushes off of eBay and replace them as needed.
Are your flowers naturally so red or are they dyed?
What is the utensil you use to coat with uv resin?
今日の作品も，又クールビューティーでしたネ。アジア風をイメイジさせたんでしょうか⁉️とても素敵ですネ着物にも，あいそうです｡次の動画が，楽しみです｡(@^▽^@)ゞ〃またネ～🌸🍃💝
im in love
Hi, I had a question for you, can you name the UV device you are using?
Hi,brand SUN ONE 48W uv-led light.
@@KreiArt Thank you♥️🤗😊
👍
Lindoooooooiio
You❤
❤️😍
😍❤️🌹
😁💐💖🍨🎂🖐😘
You are very talented. I love you videos, but your music is irritating. Can you play something that is not repetitive. Like some calm and soothing music. Art is suppose to be relaxing.
To each their own.... I enjoy their music much more than the videos with dissonant music-- that gives me a massive headache 💜