DIY Drill Powered Electric Scooter - With 3D Printed Parts

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 เม.ย. 2020
  • I made an electric scooter, using 3d printed parts an old skateboard. And I powered it using an electric drill!
    Check out my brand new Merchandise store: teespring.com/stores/alch
    Make sure to Subscribe (and ring the bell!): th-cam.com/users/achappel?sub_...
    Follow me on Instagram for more pictures and stories along the way: / a.chappel
    If you want to support my channel you can do that here: / chappel
    my favourite 3d printer: shareasale.com/r.cfm?b=228215...
    Some of my favorite tools:
    The best orbital sander: amzn.to/2xglSBs
    Bosch track saw: amzn.to/2Q07Bj7
    Drill: amzn.to/3cKVXCr
    Impact driver: amzn.to/2VZFGDp
    Jigsaw: amzn.to/2vQtbj1
    All my music is from Epidemic - Get a free 30-day trial here!
    www.epidemicsound.com/referra...
    Thank you for Watching! Tune in next week for more videos :)
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 1.4K

  • @Nerdforge
    @Nerdforge 3 ปีที่แล้ว +91

    Sick build! Also, Biltema epoxylim represent! ;)

    • @bacskaicsego8021
      @bacskaicsego8021 3 ปีที่แล้ว +1

      I noticed it as well :D

    • @Arterexius
      @Arterexius 3 ปีที่แล้ว +1

      Tbh, you should team up on something. Would love to see you working on a shared project. Perhaps future props for Andyax?

    • @iLiKEDRYNOODLES
      @iLiKEDRYNOODLES 3 ปีที่แล้ว

      Where y’all from?

    • @ignaciomitchell7176
      @ignaciomitchell7176 2 ปีที่แล้ว

      instablaster.

    • @BitSmythe
      @BitSmythe 4 หลายเดือนก่อน

      Sick: “affected with disease or ill health” Merriam-Webster Dictionary.

  • @SeaMushroom98
    @SeaMushroom98 3 ปีที่แล้ว +581

    This guy is buying lunch every day.. Meanwhile I'm over here only leaving the house once every 3 weeks.

    • @NonsensicalSpudz
      @NonsensicalSpudz 3 ปีที่แล้ว +37

      you leave the house?

    • @crossmane
      @crossmane 3 ปีที่แล้ว +46

      What is this “leaving the house”?

    • @achappel
      @achappel  3 ปีที่แล้ว +52

      Stay safe guys ❤️

    • @abdessamadelbasri2825
      @abdessamadelbasri2825 3 ปีที่แล้ว +31

      you people have houses ?

    • @thebowenarrow3166
      @thebowenarrow3166 3 ปีที่แล้ว +2

      Lucky every year I don’t leave

  • @landersantos1028
    @landersantos1028 3 ปีที่แล้ว +617

    "I SUCK AT SKATEBOARDING" at the same time owns a lot of board

    • @cornwellharley4458
      @cornwellharley4458 3 ปีที่แล้ว +13

      lander santos owns a lot of board ?
      Great English

    • @SHINdanny
      @SHINdanny 3 ปีที่แล้ว +13

      all those boards are donations to his work shop, donated by the great skater boys (because they broke them)

    • @papashank7437
      @papashank7437 3 ปีที่แล้ว +4

      Can’t argue with stupid people.

    • @cwmd7651
      @cwmd7651 3 ปีที่แล้ว +1

      that's what I was thinking lol

    • @nelvin9676
      @nelvin9676 3 ปีที่แล้ว

      Ya

  • @nicktheflash1
    @nicktheflash1 2 หลายเดือนก่อน +1

    That's so cool who would have thought that my DeWalt drill could drive a scooter? That's a great prototype additional improvements could really make this a fun DIY project to build and modify.

  • @gmelodia
    @gmelodia 4 ปีที่แล้ว +198

    This is a very underappreciated channel. I really enjoy your videos, the amount of work and complexity you put into them is simply crazy! And you have a great personality that fits the whole DIY youtuber thing very well. Keep delivering such great videos and I don't see why you shouldn't get the millions of subs other youtube makers have.May I ask if your are a mechanical engineer?

    • @achappel
      @achappel  3 ปีที่แล้ว +25

      Thanks Giorgio! I'm glad you like the videos :) I'm an industrial designer ;)

    • @cavemanvi
      @cavemanvi 3 ปีที่แล้ว +8

      I’ve been here since the straight razor restoration. Can’t wait to see him get millions of subs

    • @timstenberg5603
      @timstenberg5603 2 ปีที่แล้ว

      @@achappel Är du svensk?

    • @religionisapoison2413
      @religionisapoison2413 ปีที่แล้ว

      @@achappel I'd be interested in seeing this revisited using a pedal throttle instead of grip throttle

  • @MyRadDesign
    @MyRadDesign 3 ปีที่แล้ว +21

    Awesome job! I'd recommend moving the drill lower to improve stability and eliminate the torque issues with the drill extensions. The drill could be mounted in front of the front wheel so the weight of the drill is lower and better balanced left to right. It would be further improved by driving the rear wheel as the inertia of the drill would not be connected to the steering assembly. Any significant mass in the steering assembly can lead to over steering. Teflon tubing would probably work for routing the throttle to the rear wheel area, Props to you for showing the first board break, we have all been there...

  • @phugoidoscillations
    @phugoidoscillations 3 ปีที่แล้ว +5

    This was surprisingly fun to watch. I'm glad you included the failure of the first board, it certainly made for a more interesting story.

  • @user-ee4yy3nr3i
    @user-ee4yy3nr3i 3 ปีที่แล้ว

    Wow. Light weight and easy charge. Masterpiece.

  • @LeandroMartinezLFM
    @LeandroMartinezLFM 3 ปีที่แล้ว +150

    Only ONE THING MISSING: A little basket in the front for you to carry your lunch :D

    • @lukie4ever
      @lukie4ever 3 ปีที่แล้ว +4

      Or spare batteries

    • @daveballard8673
      @daveballard8673 3 ปีที่แล้ว +1

      And a bell. It needs a bell.

    • @spencerrivenbark6746
      @spencerrivenbark6746 3 ปีที่แล้ว

      And a headlight

    • @TravisFabel
      @TravisFabel 3 ปีที่แล้ว

      and my axe! err... I mean Brakes.
      Perhaps it says something about us that brakes are last...

    • @crazedpotatoez
      @crazedpotatoez 3 ปีที่แล้ว

      And brakes lol

  • @DominicGiles
    @DominicGiles 4 ปีที่แล้ว +3

    Your enthusiasm and excitement is the best part of this video... Brilliant... Keep it going.

  • @HuaweiY-wz3fe
    @HuaweiY-wz3fe 3 ปีที่แล้ว +3

    man I'm impressed by your consistency, effort and Genuine intellect. thumbs up. 👍👍👍

  • @ChrisJChaney
    @ChrisJChaney 3 ปีที่แล้ว +1

    it was nice to see a creator enjoying making something so much. very cool idea and execution.

  • @FredrikSoerlie
    @FredrikSoerlie 3 ปีที่แล้ว +7

    This is fantastic. And crazy. And super sketchy. I want one! :D
    Seriusly, this is the most underrated channel on TH-cam. A hidden gem that I am sure will not stay that way for long. One of the best and most fun DIY channels out there. It's like Colin Furze with more finesse, better design and a higher production value! Just need more crazy stuff like this. This was brilliant!

  • @djamelhamdia134
    @djamelhamdia134 3 ปีที่แล้ว +20

    This guy is going places.
    And definitely deserves more subscribers.

  • @PranaySondkar
    @PranaySondkar 3 ปีที่แล้ว +1

    The fact that he was having fun made this video fun

  • @m3m3sis
    @m3m3sis 3 ปีที่แล้ว

    I really like your flow and energy! Sometimes I just leave your video play in the background while I clean or anything productive really.

  • @michirechi3577
    @michirechi3577 4 ปีที่แล้ว +32

    This thing has the perfect amount of sketch in it for me to like it, keep the good work up

  • @FilipeAbreu
    @FilipeAbreu 4 ปีที่แล้ว +14

    I really appreciate your work and projects, keep going.

    • @achappel
      @achappel  4 ปีที่แล้ว +2

      Thanks a lot!

  • @JDLarge
    @JDLarge 3 ปีที่แล้ว

    Keyword: Fun! Maybe add a cover/brake over the rear wheel? You should run that on a nice smooth rubberized outdoor school track to open it up to full speed! Thanks for taking us along, it’s gotten my own wheels turning, thinking maybe I’ll make my own!
    Very cool👍🏼👍🏼

  • @Casperago
    @Casperago 3 ปีที่แล้ว

    You put your ideas in perfect harmony, NICE

  • @vilderebekka3382
    @vilderebekka3382 3 ปีที่แล้ว +83

    15:23 That’s what she said!

  • @thecomp4488
    @thecomp4488 4 ปีที่แล้ว +6

    This is such an awesome idea! Also I love the excitement you always have in your videos. Definitely wanna see what you are going to do next :D

  • @IanF5
    @IanF5 3 ปีที่แล้ว

    This is one of the more creative concepts on DIY TH-cam. Great job, well laid out, I look forward watching more builds.

  • @robertharris8106
    @robertharris8106 3 ปีที่แล้ว

    Simple brake, put a thin metal plate over the rear wheel such that when you stand on it it contacts the rear wheel to slow you and when you take your foot off it will spring free of the wheel. Love the build and the amount of insane laughter it generated. Keep up the good work.

  • @kylequinn1963
    @kylequinn1963 3 ปีที่แล้ว +5

    This is the most pointless thing I've ever seen and I love it. It's really neat seeing the things that can be made possible with a 3D printer.

  • @kasparsbutlers
    @kasparsbutlers 3 ปีที่แล้ว +9

    That is some honest to goodness, simple and understandable engineering. Love it!

  • @vegasheat71
    @vegasheat71 3 ปีที่แล้ว

    Awsome build! I love that you show how things fail. That is part of the building process. I would definitely have a blast riding that scooter.

  • @Rygir
    @Rygir 3 ปีที่แล้ว

    Those parts were impressively well designed...fitting so snuggly, with threads that grip...

  • @AlphaMachina
    @AlphaMachina 4 ปีที่แล้ว +55

    This is the most badass thing I've ever seen.

  • @Albanez39
    @Albanez39 3 ปีที่แล้ว +5

    It does have brakes. You can press on the rear wheel with your foot, the shoe's rubber sole
    will slow it down and won't make you fall since it's the rear wheel stopping/slowing down.

    • @leoncaples2947
      @leoncaples2947 3 ปีที่แล้ว

      Interesting

    • @Albanez39
      @Albanez39 3 ปีที่แล้ว

      @@leoncaples2947 I remember kids using their foot to slow down while riding their broken bicycles 20 years ago. The advantages of living in a developing country...

    • @leoncaples2947
      @leoncaples2947 3 ปีที่แล้ว

      @@Albanez39 Sounds like a good time buddy

  • @drag0nmare
    @drag0nmare 3 ปีที่แล้ว +1

    I love seeing how much fun you're having! Made my day, good job 👍👌

  • @rpyrat
    @rpyrat 3 ปีที่แล้ว

    I think your gas handle design with the string is genius! Very good use of the capabilities of a 3d printer as well!

  • @mrniceguy4277
    @mrniceguy4277 3 ปีที่แล้ว +15

    "Dude, why do you always carry around an electric drill?"
    - "You wouldn't get it."

  • @czompolybalint3927
    @czompolybalint3927 3 ปีที่แล้ว +112

    Normal people: charge their electric scooter
    Him: charges his drill

    • @josecruz021
      @josecruz021 3 ปีที่แล้ว +4

      Swapping out batteries woukd be a breeze

  • @Hessijames79
    @Hessijames79 2 ปีที่แล้ว

    I love the idea with the locking hex nut in the vice to be able to file the hex part of the axle.

  • @N0biKn0bi
    @N0biKn0bi 3 ปีที่แล้ว

    The handle and gas is so clever! Cool!

  • @medienmond
    @medienmond 3 ปีที่แล้ว +120

    Please publish the 3D models. Otherwise this would be just another scooter without any real use. Greetings from Germany.

    • @steelavocado1
      @steelavocado1 3 ปีที่แล้ว +12

      Medien Mond dont 3D print this. Use a scooter as you can find them for sale online everywhere for Cheap

    • @jensharbers6702
      @jensharbers6702 3 ปีที่แล้ว +7

      @@steelavocado1 And a Hub Motor would be more Efficient and you can control it better. ^^

    • @ProtoMan137
      @ProtoMan137 3 ปีที่แล้ว +9

      Tehnically you couldn't even use it in Germany lol

    • @THYCR3AT0R
      @THYCR3AT0R 3 ปีที่แล้ว +2

      tbf you'd probably burn out the drill motor on your first ride. I don't think they're designed for constant use, just intermittent use.

    • @Angeltitsss
      @Angeltitsss 3 ปีที่แล้ว +1

      @@THYCR3AT0R witch shows exactly why you should not join conversations much above your level of intelligent. You know nothing about how the motor of a drill operates or how and what they were engineered for.
      (π0+ √U$+ I/✓ ∆ d®!££)

  • @Mythix2
    @Mythix2 3 ปีที่แล้ว +36

    I was thinking when he started cutting the deck: "I dont hink he realizes how flexible a deck is" haha

  • @nickizcool20
    @nickizcool20 3 ปีที่แล้ว

    That’s so cool man a drill powered scooter really fun looking!!!

  • @NottsBobUK
    @NottsBobUK ปีที่แล้ว

    Genius Sir, I love it! I wander why I've never come across your channel before and can't wait to see some of your other videos.

  • @239peytonn7
    @239peytonn7 3 ปีที่แล้ว +38

    Imagine using an impact driver with this 💀💀

    • @notchs0son
      @notchs0son 3 ปีที่แล้ว +4

      Ok guys see you for lunch in 30 *pulls out impact driver* WHEEEEEEEEEEE *hauling 20 down the road*

  • @marcus_w0
    @marcus_w0 3 ปีที่แล้ว +323

    Everytime I see someone hit a bearing with a hammer, something inside of me dies.

    • @nomadicriders
      @nomadicriders 3 ปีที่แล้ว +7

      he could've used a drill press with a dead shaft to press the bearing

    • @xagvsx1521
      @xagvsx1521 3 ปีที่แล้ว +8

      wuss

    • @Abrikosmanden
      @Abrikosmanden 3 ปีที่แล้ว +23

      @@xagvsx1521 Aren't you a badass?! Look out, people!!!

    • @hotfuzz1913
      @hotfuzz1913 3 ปีที่แล้ว +9

      I would say that's tap and die then?

    • @MegaGuitarpicker
      @MegaGuitarpicker 3 ปีที่แล้ว +3

      The rollers and races die also.

  • @matthewperlman3356
    @matthewperlman3356 3 ปีที่แล้ว

    Cant believe haw well that worked in the end. Great job!

  • @sportsphotos31
    @sportsphotos31 2 ปีที่แล้ว

    Good thing I discovered your channel on a Holiday Weekend. Binge mode engaged!

  • @captainmarshalliii3304
    @captainmarshalliii3304 3 ปีที่แล้ว +13

    "This project was more complicated then I anticipated."
    Basically every project I start.....

    • @KimbrellBrad
      @KimbrellBrad 2 ปีที่แล้ว

      Exactly! Start a project, go to woodstore, go to plumbing store 4x, back to woodstore for more pocket screws, ...LOL

  • @RavenHackberry
    @RavenHackberry 3 ปีที่แล้ว +105

    I would suggest choosing different shot angles when outside or blur identifying marks in your video. It was very easy to find the building you shot in front of. As you have expensive tools and have a growing viewer base the sad truth is that not all viewers are rational and respectful. Just keep safe and thanks for the great content!

    • @salamona03
      @salamona03 3 ปีที่แล้ว +75

      He lives in Norway they haven't invented crime there yet

    • @daahoo
      @daahoo 3 ปีที่แล้ว +41

      @@salamona03 yeah. Crime is illegal there 😆

    • @woutvandessel1823
      @woutvandessel1823 3 ปีที่แล้ว +16

      @@daahoo I wish they could make crime illegal in other parts of the world as well.

    • @asztapaszta9
      @asztapaszta9 3 ปีที่แล้ว +2

      @@salamona03 Daing, and i thought he is from Germany. Good to know, i guess :)

    • @JW-hh4qg
      @JW-hh4qg 3 ปีที่แล้ว +5

      Yeah, took like 2 mins to find. i wish that wasn't a real concern, but I guess it could be :/ good thing is that he's in a basement unit with whited out windows, so it would be a little harder to find.

  • @armandmatossian2081
    @armandmatossian2081 3 ปีที่แล้ว

    Excellent work!! Outstanding video and lighting

  • @MarkLoves2Fly
    @MarkLoves2Fly 3 ปีที่แล้ว

    This was SUPER fun to watch! Nice work!

  • @heyimamaker
    @heyimamaker 3 ปีที่แล้ว +4

    Thank you for pressing the bearings in using the outer race, it makes me sad when people do it wrong.

  • @SHINdanny
    @SHINdanny 3 ปีที่แล้ว +5

    21:05 reminds me of Frankenstein: HE IS ALIVE! HUHUAHUAHAAHUA :D

  • @thenextlayer
    @thenextlayer ปีที่แล้ว

    You're nuts bro. I love it. Thanks for all the inspiration.

  • @JOELwindows7
    @JOELwindows7 3 ปีที่แล้ว

    DIY electric scooter yess. No need expensive... kinda. Cool and good
    This is your daily dose of Recommendation

  • @calebmabe1224
    @calebmabe1224 3 ปีที่แล้ว +10

    When he says ill put scooter wheels on a skateboard i died

    • @cameronlau
      @cameronlau 3 ปีที่แล้ว +1

      oovoo java then he said that skaters would appreciate it. Lmao I hate it but it was a good job

    • @daelyngilreath2851
      @daelyngilreath2851 3 ปีที่แล้ว

      Kid

    • @calebmabe1224
      @calebmabe1224 3 ปีที่แล้ว

      Yeah

  • @derchesten
    @derchesten 3 ปีที่แล้ว +432

    In my head: "ok so it's the curvature in the y axis what gives the board it's stiffness"
    AlCh: *saws off the curvature*
    Me: "aight hopefully he won't regret it"
    AlCh: *breaks the board*
    Me: "oof, either he uses metal for the board or a board that's not cut in that direction"
    AlCh: *immediately saws off the curvature again*
    Geometry: _am I a joke to you_

    • @PWARHOLM
      @PWARHOLM 3 ปีที่แล้ว +19

      The difference between an industrial designer & an engineer :-)
      Bending inertia I= (B*H³)/12 - notice how the height is cubed!
      That is why the board was cupped to increase the height with the same amount of material.
      I did not understand why the board width had to be reduced.
      Still this build is very good ;-)
      and the fix was a nice Queen truss - at the expense of road clearance ;-)

    • @PWARHOLM
      @PWARHOLM 3 ปีที่แล้ว +5

      And the design was much better than I could do ;-)
      this is why we have specialists.

    • @derchesten
      @derchesten 3 ปีที่แล้ว +10

      @@PWARHOLM I suppose Alexandre reduced the width to have it look more like a traditional scooter, or to have it being more manageable.
      Also that's the inertia of a square section, I don't wanna calculate the inertia of the true section but it's a nice approximate. plus i gotta admit, the truss was a smart way to fix the bending problem, altho if I was him I would've used a smaller truss

    • @achappel
      @achappel  3 ปีที่แล้ว +33

      🤷‍♂️

    • @youtubechannle532
      @youtubechannle532 3 ปีที่แล้ว

      derchesten lol

  • @Sk8erFl0w
    @Sk8erFl0w 3 ปีที่แล้ว +2

    First time viewer, this was awesome😂 I’m sold, you got a new sub! 🤙🏼 that looks super fun btw 😂

  • @zwurltech9047
    @zwurltech9047 3 ปีที่แล้ว

    Very clever solutions, I'm impressed!

  • @CaribouKH
    @CaribouKH 3 ปีที่แล้ว +20

    Amazing! I'm suddenly looking at my Dewalt with a weird grin :D.
    With that gas system couldn't the drill be attached all the way down as well? Or even holding the drill at the back.. soo many ideas.
    I agree with so many other comments.. I don't understand how this channel has under 100k subscribers. The content is right up there with Tested, TOT, Diresta, Alec Steele etc...

    • @designsbyphilip510
      @designsbyphilip510 3 ปีที่แล้ว

      If you wanna see what you power with a drill, watch Izzy Swans channel sometime.

  • @jjcc8379
    @jjcc8379 3 ปีที่แล้ว +5

    Clever use of the one way bearing.
    But as you mention, it's sketchy. That drill extension wobbling during use ... and turning completely exposed to the elements ... hope no plastic bag or piece of cloth comes near that or it'll get pretty wrapped!
    If the drill torque effect on steering is too strong ... have you considered making a rear wheel drive version ?
    And ... why the hell doesn't it have two handles? It kinda triggers my OCD

    • @matsv201
      @matsv201 3 ปีที่แล้ว +1

      Make me wonder if a can use a drill to power my wheel barrel. But I would need some gearing.

  • @briann3942
    @briann3942 2 ปีที่แล้ว

    This is amazing! I am actually thinking about doing this. I travel an uncomfortable distance from class to class. Awsome work!

  • @briggsbughouses6291
    @briggsbughouses6291 3 ปีที่แล้ว

    Ingenious and bonkers in equal measure! Subscribed!

  • @perandren9179
    @perandren9179 3 ปีที่แล้ว +25

    This is kinda like ILTMS but with engineering and ADHD. Subscribed.

  • @Blejzzz
    @Blejzzz 3 ปีที่แล้ว +27

    14:21 - you have two options now.
    first: make a new one
    second: diet xD

  • @austin9481715
    @austin9481715 2 ปีที่แล้ว

    I like the second bored more anyways it matches your color scheme for printing a lot better then the last one.

  • @Julliigan
    @Julliigan 3 ปีที่แล้ว

    This is one of the best and coolest projects I’ve ever seen on TH-cam. Congrats.

  • @gamakrom
    @gamakrom 3 ปีที่แล้ว +3

    Problem: *exists*
    Alexandre: „I got a solution for that, I 3D printed this...“

  • @benzad123
    @benzad123 4 ปีที่แล้ว +6

    Now I really want those print files. Unless you're gonna make me get stuck on fusion for the next week xD

    • @achappel
      @achappel  3 ปีที่แล้ว +1

      Hey, it's a fun Fusion challange 🙃

    • @maltvat
      @maltvat 3 ปีที่แล้ว

      @@achappel Does that mean no files? You could also sell the front shafts, and have affiliate links for the other components.
      Separate thought: I wonder if a hammer drill would work better? I worry about burning up a regular drill with that kind of work.
      Great channel man! I just subbed a couple days ago.

  • @JoeGameVideos
    @JoeGameVideos 3 ปีที่แล้ว

    you littrly brought me to an idea with 2 drills lol
    a car 1 drill forward 1 dril backward and steating like a spaceship also sitting/laying as the pilot !

  • @nevelli7485
    @nevelli7485 3 ปีที่แล้ว

    You are a genius. It was a great work.congratulations.loves from Turkey.

  • @julek43
    @julek43 3 ปีที่แล้ว +4

    This scooter probably has more torque than your Honda Civic

  • @maximilianmalcolm8967
    @maximilianmalcolm8967 3 ปีที่แล้ว +3

    Can you please post the files on thingiverse so we can print our own please?

    • @maxmalcolm1943
      @maxmalcolm1943 3 ปีที่แล้ว

      Yes please it would be helpful

  • @alejandronan607
    @alejandronan607 3 ปีที่แล้ว

    This build and video is absolutely brilliant! Chuckled all the way through, thanks for that :)

  • @Simon-jg6yb
    @Simon-jg6yb 3 ปีที่แล้ว

    Love this project! Great work

  • @TECsta76
    @TECsta76 3 ปีที่แล้ว +4

    Stop using a metal hammer for this kind of work, look into a Silicon one?
    Like window glazers use..

    • @xtonybaloneyx
      @xtonybaloneyx 3 ปีที่แล้ว

      sometimes you gotta just make do.

  • @kevinbernadet5365
    @kevinbernadet5365 3 ปีที่แล้ว +9

    im happy Marilyn Manson found something to occupy his time

  • @nmlbyoxy2978
    @nmlbyoxy2978 3 ปีที่แล้ว

    Thanks for putting so much work for our entertainment

  • @thangammaon5651
    @thangammaon5651 3 ปีที่แล้ว

    Enjoyed it... 3d printer really helps our imagination to physical form

  • @zanderyes
    @zanderyes 3 ปีที่แล้ว +4

    who else clicked on the video because it wont get off their recommended

  • @k.larsson1848
    @k.larsson1848 3 ปีที่แล้ว +3

    "DIY" - DO IT YOURSELF.. yeaaa sure

    • @ivanosf3674
      @ivanosf3674 3 ปีที่แล้ว

      He did it himself, 🤡

  • @xdeadwrongxdeadwrong7181
    @xdeadwrongxdeadwrong7181 3 ปีที่แล้ว

    Wow....alot of thought went into to this. It turned out awesome. You really know what you are doing.

  • @praneshkarroy5562
    @praneshkarroy5562 3 ปีที่แล้ว

    Awesome Idea. Also, the most electric blue eyes I have ever seen. :)

  • @KiatHuang
    @KiatHuang 3 ปีที่แล้ว

    Looks like seriously good engineering.

  • @ShinyTechThings
    @ShinyTechThings 3 ปีที่แล้ว +1

    Dude, this is awesome!

  • @grahamserle7930
    @grahamserle7930 3 ปีที่แล้ว

    That was pretty cool. You're just a grown up kid really but I bet you were a mad scientist in a previous lifetime. Well done on a beautiful piece of engineering.

  • @reggierilan3229
    @reggierilan3229 3 ปีที่แล้ว

    i just found a creative youtuber that makes a quality content for makers! keep it up man!!

  • @HuaweiY-wz3fe
    @HuaweiY-wz3fe 3 ปีที่แล้ว

    Genuinely Genius Man 👌💯👊 less Show of More Intellect

  • @thejmrexperience2349
    @thejmrexperience2349 3 ปีที่แล้ว

    dude, you just earned my subsribe, sick content, but this video just did it. keep up the awesome creativity and creations!

  • @naspotter7107
    @naspotter7107 3 ปีที่แล้ว

    Wow, great channel! All your projects and videos are awesome. I really like the way you make those projects and present it they are very unique, I appreciate that! So professional...

  • @mysteryoflove
    @mysteryoflove 3 ปีที่แล้ว

    Nice work! Subscribed after watching couple of your videos. Keep up the qualities

  • @Creeperboy099
    @Creeperboy099 3 ปีที่แล้ว

    I never really thought of drill powered homemade vehicles as reasonable, but with the position and the ability to remove the drill, I think this is a great concept- an electric scooter that you don’t have to buy with a motor and electronics

  • @travelgans1866
    @travelgans1866 3 ปีที่แล้ว

    really great job, i love the way you thinking and produce things from zero, keep on the great work :)

  • @thinkthencreate7341
    @thinkthencreate7341 3 ปีที่แล้ว

    What a brilliant engineer

  • @andresjoberg
    @andresjoberg 2 ปีที่แล้ว

    I'm a skateboarder, and I approve of this project :)

  • @kozmicdrop4355
    @kozmicdrop4355 3 ปีที่แล้ว +1

    Bro that type of dedication you deserve my sub keep it up dwag👊💯

    • @achappel
      @achappel  3 ปีที่แล้ว +1

      Thanks buddy! ✌️

  • @Sam-tp3kp
    @Sam-tp3kp 3 ปีที่แล้ว

    That is sooo coool!!!
    I wish I was good at 3D printing so I could make that

  • @gorshkovmike
    @gorshkovmike 3 ปีที่แล้ว

    Great job! Design and color like a mop of a well-known company! Great trolling!))

  • @abderrahimacheban3289
    @abderrahimacheban3289 3 ปีที่แล้ว

    Please keep the creativity,I love your build ,🌹😍

  • @samuelderks1225
    @samuelderks1225 3 ปีที่แล้ว

    Your videos are amazing, just keep going and im sure you will become bigger and bigger!

  • @AppliedProcrastination
    @AppliedProcrastination 3 ปีที่แล้ว

    This is great stuff, Alex! Thanks to NRK for introducing you, it's so hard to find Norwegian maker-TH-camrs "organically" through YT itself. Subbed and looking forward to more of your stuff!

  • @jonsaystv8942
    @jonsaystv8942 3 ปีที่แล้ว

    That was very cool sir!really enjoyed watching 😊

  • @prettyboypops
    @prettyboypops 3 ปีที่แล้ว

    This guy deserves way more subscribers.