Robbie, i love what your doing with the civic personally i love these cars and i think this one will be amazing. Btw i think the civic would look good black
Undercoat the underside of the fenders. Primer and bond are both poris and attract water and moister. You're gonna get those rust spots back in half the time as before.
Loved the peek at the new wheels about a week ago, can't wait to see all that meat fit under those fenders! Love seeing this slowly come together, shows that any amount of proper work will push someone in the direction they want to go!
If you rub your hand flat on the surface u gonna be able to feel any imperfections. IF YOU FEEL IT, YOURE GONNA SEE IT WHEN ITS PAINTED. I do auto body
I don't know if anyone has said anything, but get some rubberized undercoating to spray in the wheel wells to help prevent rust. They make some that isn't super textured so it wouldn't look weird, and plus since it's rubberized it will help fill all the small holes and gaps that may still exist.
Consider hitting the flairs with a little heat. That will relax the pressure from bending them to fit. Then you can cut the flairs along the bumper line, attach a quick release and everything should still line up.
Even on a budget build, use panel bond for glueing. Bondo is only for cosmetic purpose and not for integrity or support. The two part epoxy is range from soft and flexible, semi hard semi flexible and hard as a diamond. And they are permanent. It would be perfect to glue the quarter panel that you cut open back together because it will last the life of the car. And it is waterproof.
Hey bro if you want to see the imperfections before painting it get some black spray paint and hit the areas you bondoed with a light coat of the black. Then sand down the area using a higher grit sandpaper. It will help if you put the sandpaper on a long block. The high and low areas will become evident. You then can go back with bondo and correct those areas. Repeat this step as many times as you please. I’d say atleast 2 or 3 Times....
not bad though guys, its a project car, your gonna make mistakes and take risk that you wouldnt normally make on a show car or a daily...love the content, keep it up 👍
Next tJ ? Canadian version nah mad I saw your first brz remote secrets etc and wow u came a big way I’m sure in the future your gonna be someone HUGE !
Nice job Robbie. I am deeply hoping that u will succeed with Your project. I can see this Civic in nice, very fruity and juicy orange colour. I will keep following Your videos. Warm greetings from Poland.
"when were done there gonna be like holey shit they did a damn good job" rewatching this a year on now its been fully built for the second time robbie was defo right
Damn Crushing it..... 7 mins, 145 views and 19 comments
Enjoy your videos. I look forward to watching them and the progress on projects.
15 mins and 1715 views SNOWBALL :D
Tom Peters at 1 hour its 4.1K
all thanks to your guys support !!❤️
Robbie, i love what your doing with the civic personally i love these cars and i think this one will be amazing. Btw i think the civic would look good black
Car 100% lightinthebox .
Wow 50k subs, this build is giving you a jump. Good shit man!
Your videos are entertaining af. I promise you bro, just keep doing what you’re doing and you’ll for sure be doing TH-cam for a living. ❤️
That's the dream! thank you !!!
And it came true!
OR!ON a year later look at him now! proud of him!
너도 귀하의
You guys did a great job. Positive attuned is everything, it will take you to the right way. Keep it up. 💯
i usually don't give new automotive channels a chance but I'm happy i did. i enjoy watching your videos as much as i enjoy tj hunts and evan shanks
Loving the fact your showing all the errors
You only get great by practice and your doing a fantastic job
Keep up the great work 😁😁😁😁
I was sneezing at 16:02 and right after I sneezed, he said "...bless you!" Haha thanks mate.
Undercoat the underside of the fenders. Primer and bond are both poris and attract water and moister. You're gonna get those rust spots back in half the time as before.
great video! props for widebody-ing without any experience. takes balls
Ordered my shirt yesterday...supporting the brand!
Loving these vids keep em up cant wait to see end result
me either!!
I love your videos, watching you and your channel progress over the last month or so has been awesome. Keep it up and you will be full time in no time
Duuudeeee this exactly what I was looking for, I just thought about this idea and it’s great to see it first before do in it yourself 🙏🏻👌👌 thanks
Loved the peek at the new wheels about a week ago, can't wait to see all that meat fit under those fenders! Love seeing this slowly come together, shows that any amount of proper work will push someone in the direction they want to go!
Looking sick! I'm glad you're not just riveting it in. It's going to look so much more clean this way!
so stoked loving the content, keep it up guys can't wait for new videos, love from CROATIA
Really loving these vlogs :) keep up the good work!
Yooo this is sick!!! Especially for a first time!!!!
Enjoying this series mate👍
Your like the Canadian Tj hunt... except less cocky! 🤙🏽
always humble🤘🏼
@tjhunt
Awesome dude I really like covering up the hardware but I don't see many people doing it and am extremely excited to see the outcome in the long run
I’m actually really excited to see where this goes
I love how much fun they have while working good team work💪💯❤
This is awesome, when I get my first car, totally planning to use some of these budget mods
Shes shaping up real nice. Good on ya Robbie.
Love your vids bro keep up the great work 👍👏
That looks amazing!!
Didn't think it would look this great, great work. Great videos!
Congrats on 50k!
thanks ❤️
congrats on 50k, looking forward to see what happens with the build!
The way you say "out" and outside" is cool :D
Those flairs look awesome
This series is so exciting :D
Im pretty new to this channel but i love these videos about the civic. I cant wait till the next video man!
i love ur videos,they are so entertaining and i really like that u do this cool stuff in a affordable way
Congrats on 50k man! Love your vids.👍
I have been waiting for this vid for so long!! Hyped! Great vid man!
Thumbs up for covering up the fender flair holes
Looks great. I'm a fan.
The hatch is slowly but surely coming together! Stay committed bois
Lookin good guys! I'm ready for the new wheels!
TheMrOpoo there's minilights/superlights in the back round
soon man!!
Loving this Channel. Keep it up 👍🏼
Great job guys
Great videos Robbie, keep the content coming👍
Enjoyed the video! Congrats on 50k
If you rub your hand flat on the surface u gonna be able to feel any imperfections. IF YOU FEEL IT, YOURE GONNA SEE IT WHEN ITS PAINTED. I do auto body
I don't know if anyone has said anything, but get some rubberized undercoating to spray in the wheel wells to help prevent rust. They make some that isn't super textured so it wouldn't look weird, and plus since it's rubberized it will help fill all the small holes and gaps that may still exist.
Great build guys love it!
dang that looks super good, congrats on the 50k
Loving it car going to look badass
Love ur vids, makes me want to do stuff to my car. Keep on you will make it big my friend!
Looking so good man 🔥
Greetings from Lithuania Robbie keep doing what you're doing. Your video are educational for me ;)
EfkaKrakadilas tu ne vienas lietuvis čia
Love your videos!!!!!
Are you turning into Tyler Fialko? Lol! Keep the great content!!
Not sure if that’s a compliment or not haha. That Tyler guy just butchers everything he touches. Lol.
Awesome video! Keep up the great work! Also, congrats on 50k subs!!
thank you ❤️
I subbed at the start of this build, you're killing it with these eg videos man keep it up 👍🏼 ps. Stay Committed
Hello glad your builds going well God Bless
Consider hitting the flairs with a little heat. That will relax the pressure from bending them to fit. Then you can cut the flairs along the bumper line, attach a quick release and everything should still line up.
i love this build!
Love the videos!
Even on a budget build, use panel bond for glueing. Bondo is only for cosmetic purpose and not for integrity or support. The two part epoxy is range from soft and flexible, semi hard semi flexible and hard as a diamond. And they are permanent. It would be perfect to glue the quarter panel that you cut open back together because it will last the life of the car. And it is waterproof.
doesnt matter that its a civic or that its abs wish flares. as long as you're spending time and effort on your car it gets respect from me
at 11:15 my whole view on the build changed
the civic is looking good
I love you channel man
Love the eg one of my favorite cars. When u are using bondo mix small amounts to save u from alot going to waste/ Harding
Hey bro if you want to see the imperfections before painting it get some black spray paint and hit the areas you bondoed with a light coat of the black. Then sand down the area using a higher grit sandpaper. It will help if you put the sandpaper on a long block. The high and low areas will become evident. You then can go back with bondo and correct those areas. Repeat this step as many times as you please. I’d say atleast 2 or 3 Times....
Hell yah man loving the videos on the civic there great 👍🏼
Congrats on 50k bro
Well done on 50k
I love this build 😍 can't wait to see it finished 😍
Found your channel cuz of ur cheap brz mods btw 😂
not bad though guys, its a project car, your gonna make mistakes and take risk that you wouldnt normally make on a show car or a daily...love the content, keep it up 👍
50K subs. Yeah. Congrats!
Oh the bumper going to come out
Next tJ ? Canadian version nah mad I saw your first brz remote secrets etc and wow u came a big way I’m sure in the future your gonna be someone HUGE !
Damn, the amount of time and work required to do those kinds of mods is hard to believe, but it's totally worth it!
Good work dude. How are they holding up? Thinking about doing this instead of buying full on overfenders.
I don't have any soicail media but I have subbed I enjoy this project keep it up your doing good
Nice job Robbie. I am deeply hoping that u will succeed with Your project.
I can see this Civic in nice, very fruity and juicy orange colour.
I will keep following Your videos. Warm greetings from Poland.
nice work on the Bando
Im stoced to see this finished
awesome video bro. Please get some bonnet clips i think they would look sick
Amazing videos
Love it 🔥
Starting to come togethor👌
50 k subs let's go!
Staying commited since 20k!
This is dope
Been here since your wooden trunk install on your brz, I fucking love this idea and this civic will for sure look mint, support from the uk man!
I’m only at about 8:30 but it’s looking actually really nice
Good project, now to get the front looking as good as the rear
You can tell he's really feeling the Budweiser at 4:00 lol
The Honda's back
The wheels for the Civic look good 👀
Keep it up! brutha
Take another day to sand a mold you wont regret it would look so smooth and clean
Good shit bruh
"when were done there gonna be like holey shit they did a damn good job" rewatching this a year on now its been fully built for the second time robbie was defo right
So glad i subscribed
How you disassembly the bumper?