Installing a boost gauge, would you think it would be okay to use the vacuum source behind the air bypass valve on the J-Pipe? There's a little arm that comes off the u-shaped-pipe
Really wouldn’t want to install the T adapter in that orientation. Should have put the tube going to the sensor on the angled portion and left the factory tubing straight. You’re essentially creating turbulent flow in that adapter the way you have it installed. Doesn’t make a difference in engine performance but your boost readings may be slightly off.
Have you ever gotten fuel in the vacuum line that you T’d off? I was working on my mark ii blit earlier & used the same location you used to tap in but noticed there was liquid in there and pulled it off and had a smell lol
Hello, can you just hook up the boost vacuum gauge and sensor and test to see if it works? I plugged into a vacuum source and plugged into back of gauge and needle does nothing when car is running. I did notice it comes with a short wire to two make ends. Don't know what this is for. I like your, purçhased a non own Freddy gauge. Is the gauge faulty, or and I missing a step. Thanks. I did like and subscribe
❤ You are amazing dude. You perfect explain and even amateur people can start learning because you know how to explain. I am very strict about how people try to explain in general. Bravo my boy continue like this. I hope you to have a time and good heart to help me to find exactly what i want for my Toyota avensis t27 or T270 or t271 the same model, engine 2zrfae 1.8 valvematic or if is easier you can find for 2zrfe corolla engine because the Toyota avensis 2010 t27 It's a family car and maybe not to find what I want. What I want is a gauge monitoring that records and store the driving behavior and to be able to show where there is a mistake in the way the ECU imposes the way the engine works and give me one or more correct programs for the best possible operation of my engine.
Hi there, silly question - Is that just a stick on gauge? no screws or anything needed? If so, where can I get a bracket/gauge like that? Dont want to have to screw into the dashboard. Cheers mate
Hey George gr8 video mate, I’ve a wagon and I just wanted to know where and how hard it was two get the ignition/ battery from under dash mate? And mine is series two and can’t find that boost pressure pick up you used mate. Do you know where it might be? Thank you
Hi! alright? congratulations for the video! I bought the same product and had problems with the installation as well. How was the new order of the wires you made?
Converted my GS 131 with same 160 gearbox to my 1G engine looking to swap out the engine for a 1or2 JZ need bellhousing, flywheel etc but the Facebook link u had in description not happening for me can i get a direct number please
@@GeorgeHampl as 8 said before that link not working for me there not responding to messages and no answer to phone number listed any assistance would be greatly appreciated cheers
Thanks for making these videos man it helps a lot for when I’m working on my car!
Loving the crown content George
Installing a boost gauge, would you think it would be okay to use the vacuum source behind the air bypass valve on the J-Pipe? There's a little arm that comes off the u-shaped-pipe
Really wouldn’t want to install the T adapter in that orientation. Should have put the tube going to the sensor on the angled portion and left the factory tubing straight. You’re essentially creating turbulent flow in that adapter the way you have it installed. Doesn’t make a difference in engine performance but your boost readings may be slightly off.
Doing this on a 2jz gte vvti is it simular
Where did you get the gauge pod ?
Ebay I think. It has been a while
Your steering wheel automatically moves? didn't know that was an option, mine only moves manually with a lever
Yes it's electric. Moves out of the way to get out and comes back to the position it was at.
Have you ever gotten fuel in the vacuum line that you T’d off? I was working on my mark ii blit earlier & used the same location you used to tap in but noticed there was liquid in there and pulled it off and had a smell lol
No but I would change your fpr of I were you.
@@GeorgeHampl thank you will do 🤙
Hi mate I have one Q 2jz vvt oil solenoid will fit 1jz ?
Thanks
Yes it will
@@GeorgeHampl
Thanks man
Can you do a tutorial on how to install a boost controller and FCD please George~~
Boost controller incoming
Hello, can you just hook up the boost vacuum gauge and sensor and test to see if it works? I plugged into a vacuum source and plugged into back of gauge and needle does nothing when car is running. I did notice it comes with a short wire to two make ends. Don't know what this is for. I like your, purçhased a non own Freddy gauge. Is the gauge faulty, or and I missing a step. Thanks. I did like and subscribe
❤ You are amazing dude.
You perfect explain and even amateur people can start learning because you know how to explain. I am very strict about how people try to explain in general. Bravo my boy continue like this.
I hope you to have a time and good heart to help me to find exactly what i want for my Toyota avensis t27 or T270 or t271 the same model, engine 2zrfae 1.8 valvematic or if is easier you can find for 2zrfe corolla engine because the Toyota avensis 2010 t27 It's a family car and maybe not to find what I want. What I want is a gauge monitoring that records and store the driving behavior and to be able to show where there is a mistake in the way the ECU imposes the way the engine works and give me one or more correct programs for the best possible operation of my engine.
Hi there, silly question - Is that just a stick on gauge? no screws or anything needed? If so, where can I get a bracket/gauge like that? Dont want to have to screw into the dashboard. Cheers mate
I see the works are going well on this one 😎
Hey George gr8 video mate, I’ve a wagon and I just wanted to know where and how hard it was two get the ignition/ battery from under dash mate? And mine is series two and can’t find that boost pressure pick up you used mate. Do you know where it might be? Thank you
I got a crown wagon too! I’m having electric problems with the blow off valve atm :/
Hi! alright? congratulations for the video! I bought the same product and had problems with the installation as well. How was the new order of the wires you made?
I wish I remembered
Thanks Soo much
Thank you
Great video man 🤙🔥
Choo choo!
Converted my GS 131 with same 160 gearbox to my 1G engine looking to swap out the engine for a 1or2 JZ need bellhousing, flywheel etc but the Facebook link u had in description not happening for me can i get a direct number please
facebook.com/MCLautoworxni/
@@GeorgeHampl as 8 said before that link not working for me there not responding to messages and no answer to phone number listed any assistance would be greatly appreciated cheers
@@789ghost342ghost So strange it doesn't work. I know Crest Motorsport NW is the distributor on the UK
Love the videos, keep them coming 👍
Can i get the hat now? 😂
Thank you! You can buy one now :D
what size hose did you use? 4mm?
Yes