@@archetype_origins did you need two different fan controllers, or did one suffice? How is the noise with the 6 x 120 fans + the others ? Right now I have enough for 2 x 120 rear exhaust, 3 x 120 side intake, 3 x bottom intake, and 3 x 120 AIO exhaust. Thinking of 6 x on 360 AIO …
Currently building with this case and was just wondering how I should do the air flow (first time builder). The visual airflow was just what I needed. Much appreciated. Fantastic work!
Great build! Looks amazing! The 6x total fans was not needed and probably hurting the performance of airflow if anything. Even if being the same fans at the same speed they are fighting each other. I get thought that one fans pulls air in and the other pulls it out but the design of any radiator itself is designed for 1 set of fans pulling or pushing air but not both.
Would you be able to do the fans on the back of the aio of the new Hydro shift? I’m only asking because I am going to be building in this case with all of lian li’s the stuff that is coming out and if I can, I want to be able to do this as well in my build
Thinking of the same build. But for the aio I would like to use on top reverse blades will this also be good? I will have 6x 140mm intakes bottom and side , 2x120mm rear exhaust and aio 3x120mmexhaust on top of that 3x120mm reverse blades like using it as a exhaust. That it takes the hot air out from the aio my case is evo xl
Using all those big fans - and with all the airflow they create, does that Ryzen CPU Still need to be liquid-cooled? Wouldn't the airflow be enough without adding an AOI? Thanks
The CPU? It still gets pretty hot despite all the fans and 6 are there to simply cool the aio … I got a total of 16 case fans and good COU cooling is still essential …
Hi, gz for your video, it is very entertaining. The config for the airflow shows (me) the competence of your work, the aesthetics of your composition is at the height of time. If I buy this case, this video will have helped me for the issues, I could have. Thx
Fairly new to the PC world, this is the first time seeing two sets of fans sandwiching a radiator. Is this so it pulls exhaust out for the shown test or were you trying to get more airflow to the radiator to cool the cpu more? Would it be fine without double stacking?
hey you should check out 3d printing some fan brackets to fit 4 120s on the top and bottom. I did that for mine with infinity fans and it looks so cool. I have 16 total fans in mine and it cools it like a beast
I have exchanged the front glass panel with mesh and have 120 mm AL & SL … 3 top, 3 bottom, 3 front, 1 rear, and a side 6 fan push pull for my NZXT aio but without NZXT fans … additionally 4 noctua 80mm fans to cool the harddisks … 😂 … as there was space!
While im watching this im waiting on my product Z790 rog wifi Ddr5 z neo 64gb g skill 4070 msi oc super 3x wd black m.2 2tb (alot of editing so need space) Lian li uni sl inf 9x 3 uni inf sl rev I7 149k Lian li evo xl lian li galahad sl inf 360 Both stimers 1100 gold platinum psu Some more funky things like special plate for gpu lcd for the inside of the pc but doing it bit by bit so imagination goes on wanne make a build that none done before and so far it works and this is just alot for gaming and editing 🤣 Right now i have Z390 wifi !7 97k Ddr4 32gb vengeance 3060 msi oc 12gb gaming 3 diffrent ssd and 2 hdd 6 fans from corsair and some other things so that build gonne be wild
6 large fans pushing air in and 5 small ones out? Sure, overall it works but as you can see its quite a mess - you don't see smoke flow but its inside everywhere. The fkow in the case should be allmost even - I like to go for setup where it pulls out a bit more than is pushed in to maintain better flow. The key is to make the intake fans spin slower. I mean I understand that filling all thge fan spaces up with RGB fans looks cool but you gotta do it right.
@@fullterror03 All that negative and positive "pressure" thing is little bit blown out of proportions. Its not so much about the "pressure" but creating a concentrated airflow. In this video as you can see the smoke inside the case is kinda mess - it goes everywhere, creating its own vortexes etc. and pushes out from all the open places everywhere. Having an equal or just a little bit negative pressure helps against that and its not gonna pull in dust from everywhere else. You get dust if the difference is big.
Great build! I'm just wondering you didnt change the thermal paste. Can I ask why? I know in some of your videos you change them, but, there are times you don't is there a reason?
not impressed. in a real way. i got 14x14cm fans and i don't even think i have enough of them. so i will do the aio push and pull soon to have 17 fans.
Buying a xl 011d for a 360 AIO seems like the stupidest thing I've seen in a long time. You could have done this exact same build in the standard 011d evo Also your two rear exhausts are literally competeing with, and stealing air from your AIO. The dude who built this is clueless.
![This PC has INSANE airflow! [ RTX 4080 | Ryzen 7 7800X3D | PC Build ]](/img/n.gif)
I'm doing this exact type of build, except all black, with a 4090 and an ARCTIC 420mm dual fan AIO, with the AIO being side mounted.
It’ll be awesome! Good luck
@@archetype_origins did you need two different fan controllers, or did one suffice? How is the noise with the 6 x 120 fans + the others ? Right now I have enough for 2 x 120 rear exhaust, 3 x 120 side intake, 3 x bottom intake, and 3 x 120 AIO exhaust. Thinking of 6 x on 360 AIO …
hmmm, all i'm seeing when i google artic 420mm aoi - are 3 fan designs...typo? thanks
yo @sidharthrao9005, you got any updates in your pc? hope you got a link images to comment it here so we can see that bad boy 🔥🔥
@@archetype_originsLikely an odd or foolish question but what is the purpose for the USB Hubs?
most satisfying thing is airflow test ❤️❤️
Where can i buy the screws for radiator? This extension
Theres no reverse blade fan right? I wanna use this build.
Currently building with this case and was just wondering how I should do the air flow (first time builder). The visual airflow was just what I needed. Much appreciated. Fantastic work!
Lian Li infinity fan is exellent and futuristic design, so I lile those build.
I love the white ruffles. Just my new PC project will be in a white Thermaltake CTE 750TG W case😊
Nice! It's gonna be awesome!
Does the push pull on the top really make a difference? I keep seeing and reading different answers
i did NOT realize you could dual 120mm on the back, I totally missed that mounting option for the top one!
this video was great considering i am building my first pc atm
Glad I could help! Good luck on your build
Well done guys !
Thanks man! You’re always there for us! ❤️
Great build! Looks amazing!
The 6x total fans was not needed and probably hurting the performance of airflow if anything. Even if being the same fans at the same speed they are fighting each other. I get thought that one fans pulls air in and the other pulls it out but the design of any radiator itself is designed for 1 set of fans pulling or pushing air but not both.
Thanks for the advice 🙏
Would you be able to do the fans on the back of the aio of the new Hydro shift? I’m only asking because I am going to be building in this case with all of lian li’s the stuff that is coming out and if I can, I want to be able to do this as well in my build
would i be able to swap the 4080 for a gigabye aero 4090?
Love this case build my dream gaming rig on it!
That is awesome!
What is the torque setting on the drill your using?
too bad
So sad i guess lol@@nt3829
Total cost?
Thinking of the same build. But for the aio I would like to use on top reverse blades will this also be good? I will have 6x 140mm intakes bottom and side , 2x120mm rear exhaust and aio 3x120mmexhaust on top of that 3x120mm reverse blades like using it as a exhaust. That it takes the hot air out from the aio my case is evo xl
Will it work for Lian Li fans the CPU AIO cooler i wanna add some another 3 fans in it
Yes
Hello, what is the name of the screw you used in push build, what are its dimensions, thank you.!
I've linked it in the description
Hi, I love the equipment, what do you connect at minute 8.20 ? I want to set up one just like it or as close as possible. Thank you very much
NZXT Internal USB 2.0 Hub: amzn.to/3F5XYID
That’s so clean
Thanks! Appreciate it!
Hello, very good video, I love your channel, one question, doesn't the smoke they put at the end generate humidity in the PC?
Humidity, no! I just wouldn’t recommend doing too much to the system
@@archetype_origins Ty for answer , good luck!
So you are intaking hot air through the radiator, and exhausting hot air through it. Kinda defeats the purpose of it doesn't it?
At 8:20 , there is the NZXT connector. What are the other two, please? Thank you for your response.
Lovely build video - no thermal paste needed for AIO?
It came pre installed
Using all those big fans - and with all the airflow they create, does that Ryzen CPU Still need to be liquid-cooled? Wouldn't the airflow be enough without adding an AOI? Thanks
The CPU? It still gets pretty hot despite all the fans and 6 are there to simply cool the aio … I got a total of 16 case fans and good COU cooling is still essential …
@@GanymedeXD Got it. thank you!
So do you have 2 140mm rear and the rest is 6 120mm fans ?
2 120mm and 6 140mm*
Hi, gz for your video, it is very entertaining. The config for the airflow shows (me) the competence of your work, the aesthetics of your composition is at the height of time. If I buy this case, this video will have helped me for the issues, I could have. Thx
It can do 17 fans if you put the mesh kit in the front.
Great idea!
17? Where … I did that and with push pull system there was room for max of 16 fans!
Well … 2 in the rear even if 120 mm … no chance …
Looks dope
how much this costs
Fairly new to the PC world, this is the first time seeing two sets of fans sandwiching a radiator. Is this so it pulls exhaust out for the shown test or were you trying to get more airflow to the radiator to cool the cpu more? Would it be fine without double stacking?
Yes it would be fine without push pull configuration
@@archetype_origins thanks man👍🏻
What was the total cost? Nice build
pls does anyone know the name and size of the screw he used at 3:28 to secure the fans to the rad and then to the case , thanks
amzn.to/3VeYTPK
@@archetype_origins Thanks a million
Bro nothing related to the pc build, i just wanted to know the name of the bracelet u using, looks great 👍. The one that looks like a chain.
It's the monogram chain bracelet by LV
hey you should check out 3d printing some fan brackets to fit 4 120s on the top and bottom. I did that for mine with infinity fans and it looks so cool. I have 16 total fans in mine and it cools it like a beast
you have any links to the 3d print files ?
also i want to see your pc lol can you show pics/vid ?
I have exchanged the front glass panel with mesh and have 120 mm AL & SL … 3 top, 3 bottom, 3 front, 1 rear, and a side 6 fan push pull for my NZXT aio but without NZXT fans … additionally 4 noctua 80mm fans to cool the harddisks … 😂 … as there was space!
How did you figure out how to get boba in the pc? 😂
I'm assuming this comment is for another PC build? 😂
Could be
Bro replace the stock thermal paste !!!!!!!!
hermoso ensamble , saludos desde lima peru
i think better using vertical gpu
It’ll look good to certain people but our customer did not want it
While im watching this im waiting on my product
Z790 rog wifi
Ddr5 z neo 64gb g skill
4070 msi oc super
3x wd black m.2 2tb (alot of editing so need space)
Lian li uni sl inf 9x
3 uni inf sl rev
I7 149k
Lian li evo xl
lian li galahad sl inf 360
Both stimers
1100 gold platinum psu
Some more funky things like special plate for gpu lcd for the inside of the pc but doing it bit by bit so imagination goes on wanne make a build that none done before and so far it works and this is just alot for gaming and editing 🤣
Right now i have
Z390 wifi
!7 97k
Ddr4 32gb vengeance
3060 msi oc 12gb gaming
3 diffrent ssd and 2 hdd
6 fans from corsair and some other things so that build gonne be wild
We are super excited for you! Its going to be a huge change!
Wow. Just wow. 🍷🗿
😳
Hello 👋 I am Sebi from Brașov (Romania,, do a good job 👍👋🤩🫶👏👍
Thanks for coming
6 large fans pushing air in and 5 small ones out? Sure, overall it works but as you can see its quite a mess - you don't see smoke flow but its inside everywhere. The fkow in the case should be allmost even - I like to go for setup where it pulls out a bit more than is pushed in to maintain better flow. The key is to make the intake fans spin slower. I mean I understand that filling all thge fan spaces up with RGB fans looks cool but you gotta do it right.
so you like negative pressure on your pc
@@fullterror03 All that negative and positive "pressure" thing is little bit blown out of proportions. Its not so much about the "pressure" but creating a concentrated airflow. In this video as you can see the smoke inside the case is kinda mess - it goes everywhere, creating its own vortexes etc. and pushes out from all the open places everywhere. Having an equal or just a little bit negative pressure helps against that and its not gonna pull in dust from everywhere else. You get dust if the difference is big.
You have no idea what you're talking about @@brudel001
Great build! I'm just wondering you didnt change the thermal paste. Can I ask why? I know in some of your videos you change them, but, there are times you don't is there a reason?
not impressed. in a real way. i got 14x14cm fans and i don't even think i have enough of them. so i will do the aio push and pull soon to have 17 fans.
Buying a xl 011d for a 360 AIO seems like the stupidest thing I've seen in a long time.
You could have done this exact same build in the standard 011d evo
Also your two rear exhausts are literally competeing with, and stealing air from your AIO.
The dude who built this is clueless.
I wanna like this but it has 69 likws
Bruh 😂
push/pull useless
If you can’t afford just say, there’s no shame bro
True..there is no significant difference between temperatures..
And? Does not do any harm! Looks cool!