Sorry, but I can not help you on this one, for a start I'm not a Renault expert but an ex-Porsche competition engineer furthermore I have no experience with EVs of any sort. However, I've heard that the brake system on EVs works on an electric servo assisting unit which presumably you need to activate with CLIP in order to perform the bleeding. Unfortunately, I have no knowledge of the necessary routine.
thanks so much. It's very clear. sorry my english is not perfect and my french too. I hope with this information I can erase ABS calculator fault on renault scenic 2 - 1.4 16v - 2004. Now it's impossible to start the engine. I have default on board with driver wheel column and the CAN CLIP said ABS calculator (1094) not detected Thanks again, Have a good day.
Hi, very clearly how to do. I have a Renault espace 4, 2.0 dci, 150 HP, 2007, nobody knows what is df015, I have the definition for the error but nothing to get the point, checked all pedal sensors, reverse switch, all working. On dashboard is Check parking brake with triangle and the spanner. Press clutch pedal, disappear the message. After releasing the pedal coming back. To mention that everything working fine. Thank you
Triangle warning light in my 500 fiat 2010 stays on all the time ...when lights are on , but goes off with no lights on ! Plus red light warning constantly from boot door..... ( door close properly) electrical fault ? Fammi sapere quando riesci a eliminare COVID 19 ! ! Abbracci.
Caro Pino, this computer is only for Renault cars however when I'm next in London I'll take a look at your 500. For covid I'm well equiped with both knowledge and indoor pharmacy so please ask and you'll be answered.
The short answer is I don't know because I never had to do such a thing. however, I shall investigate and report if I have any joy. Sorry I could non be of more help at this moment.
@@sohailjaned I looked into my Clip and could not find a reference to your mention, perhaps you could expand a little on it explaining it in more detail. Even though back in the 780s I was a Porsche Racing constructor, I am not an expert on Renault but it is always interesting looking into problems like this one just in case it's ever needed. I bought Clip 6 years ago to resolve multiple problems with my car and only used it a few times.
Connect following the video above then click on the information tab . . . if there is a fault it will show there, I'm not sure if you can check efficiency tough ;)
Any old laptop PC will do, all my PCs are servers but likely I have 2 MacBookPro and I run Parallels for mac on one of them which gives me Windows 7 (or else) and it seems fine.
@@haraldsauer728 Sorry about the misunderstanding, the hardware is part of CLIP when you purchase. There are many sources for the complete package and, after investigation back in 2016, I was advised to buy the "green circuit board" hardware and disregard the blue board. If I was buying today I would check again though
You have to install ether bootcamp or better still Parallel Desktop which is quicker to start directly from your Macbook screen. With bootcamp you have to shut down and restart. Hope this helps
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Please! Can you please show how to change the brake fluid on a Renault Zoe, with Can clip? Thanks! from Tommy Bertilsson From Sweden
Sorry, but I can not help you on this one, for a start I'm not a Renault expert but an ex-Porsche competition engineer furthermore I have no experience with EVs of any sort. However, I've heard that the brake system on EVs works on an electric servo assisting unit which presumably you need to activate with CLIP in order to perform the bleeding. Unfortunately, I have no knowledge of the necessary routine.
Thank’s Anyway.
I did not know you could run clip on a Mac.
How do you know its Mac? I can see Windows there. Maybe he have sort of Win virtualisation?
Whats the point of deleting log file?
I do not recall having said so, I did delete the error though
Yo creo que este video se lo van copiando de unos a otros porque todos son videos MALISIMOS que dan pena verlos
thanks so much. It's very clear.
sorry my english is not perfect and my french too. I hope with this information I can erase ABS calculator fault on renault scenic 2 - 1.4 16v - 2004. Now it's impossible to start the engine. I have default on board with driver wheel column and the CAN CLIP said ABS calculator (1094) not detected
Thanks again, Have a good day.
I have a K9K A7 engine, learning injectors will probably work. Do you also have to learn a new egr and other turbo?
Not sure what you mean, are you wanting to know about them or how to repair them ?
@@9111logic I have to buy a kan klip. A new exhaust valve and turbo, Learning in the ECU or not like injectors?
Can you make a Video showing where to find such tools in Can clip? Thanks! From Tommy Bertilsson from Sweden
Mercy
Dear @Mauro Andreini may you please help me, how to turn on cruise control on Laguna 3 2010/2011 year with Clip. Thank you
Can some one tell me plz?? Where we can find this Clip launcher software ???
thanks for this guide ... can you explain how to clear errors even with can clip v184?
I have version up to 210 and so far I have not seen many differences in cancelling errors.
Hi, very clearly how to do. I have a Renault espace 4, 2.0 dci, 150 HP, 2007, nobody knows what is df015, I have the definition for the error but nothing to get the point, checked all pedal sensors, reverse switch, all working. On dashboard is Check parking brake with triangle and the spanner. Press clutch pedal, disappear the message. After releasing the pedal coming back. To mention that everything working fine. Thank you
Triangle warning light in my 500 fiat 2010 stays on all the time ...when lights are on , but goes off with no lights on ! Plus red light warning constantly from boot door..... ( door close properly) electrical fault ? Fammi sapere quando riesci a eliminare COVID 19 ! ! Abbracci.
Caro Pino, this computer is only for Renault cars however when I'm next in London I'll take a look at your 500. For covid I'm well equiped with both knowledge and indoor pharmacy so please ask and you'll be answered.
hi plse what s name of that software
Renault Clip hardware and software
@@9111logic can i remov fault error from ecu renault megane with that software
i have discounted the coil wire and car doesn't start
Hi I need your help. Please cab you tell me how i can change the speed signal in the UCH from tachograph to ABS? Thank you
The short answer is I don't know because I never had to do such a thing. however, I shall investigate and report if I have any joy. Sorry I could non be of more help at this moment.
@@9111logic I appreciate your reply and I shall wait to hear from you if you can check for me.
@@sohailjaned I looked into my Clip and could not find a reference to your mention, perhaps you could expand a little on it explaining it in more detail. Even though back in the 780s I was a Porsche Racing constructor, I am not an expert on Renault but it is always interesting looking into problems like this one just in case it's ever needed. I bought Clip 6 years ago to resolve multiple problems with my car and only used it a few times.
How can you shut down the service light?
Love some more guides to use the clip
How to measure the AC or compressor efficiency by renault clip
Connect following the video above then click on the information tab . . . if there is a fault it will show there, I'm not sure if you can check efficiency tough ;)
Many thanks! What is the cheapest hardware to use with CAN clip?
Any old laptop PC will do, all my PCs are servers but likely I have 2 MacBookPro and I run Parallels for mac on one of them which gives me Windows 7 (or else) and it seems fine.
@@9111logic I meant the thing to put into the obd interface. Or how do you connect to the car?
@@haraldsauer728 Sorry about the misunderstanding, the hardware is part of CLIP when you purchase. There are many sources for the complete package and, after investigation back in 2016, I was advised to buy the "green circuit board" hardware and disregard the blue board. If I was buying today I would check again though
What should I do or install if I wanna have CAN CLIP Software running on my mac?
You have to install ether bootcamp or better still Parallel Desktop which is quicker to start directly from your Macbook screen. With bootcamp you have to shut down and restart. Hope this helps
@@9111logic Thanks. Looks better option than I'm using right now - via VirtualBox.
how to delete red faults? I have oil thin error. I have new oil and filter, but still the red fault.
Can I ask why to delete faults? I thing its just a log, so no need to do so.
Thanks ! Can I run this software with a generic OBD2 interface ?
Unfortunately you need the Renault Interface called "Clip" of which you can find a Chinese clone on Ebay