X9000 vs Bac 8000 vs KO Pro & Fspec|| What should you buy
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Instagram:
....
Facebook:
/ progressivee
Sur Ron Mod & Fix Playlist:
th-cam.com/users/pl....
KO MOTO Playlist:
th-cam.com/users/pl....
Music:
song 1 • Zeli - Sharks | Electr...
song 2 • Rxm リム - LOOK AT ME! |...
song 3 • Rival - Falling (w/ CR...
My experience is the same. The X9K is very controllable when doing slow technical climbs over doll head sized rocks. That was the standard I used as a comparison add to that the electronic design made the x9k an easy decision. I am still quite pleased with my decision.
You guys need more subscribers, viewers and sponsorships. Your content is top notch and I can only imagine the quality if you were sent all kinds of parts for LBXs, Ultra bees, etc. Really the best and most indepth ebike content on TH-cam!
Thanks for the kind words really appreciate it. Hopefully one day until then will keep working hard and getting content out that people want to see.
Reliability! Is key while providing excellent smooth power .! X9000💪🤷♂️
The X9000 is our favorite as well. The KO shines over the BAC. It’s nice that we finally have some good options that were actually built for the bikes, no more farm equipment controllers on my bikes 🤘🏻
Of course X9000 won! Not for looks...not that I really care about that. It's VESC...of course it's the best. KO uses FAR Driver limited FOC motor control and VESC is full on FOC on a proper CPU that can run the full FOC suite. I have to ask...what throttle mode were you using on the BAC8000 and x9000???
Sweet video guys! I am rocking the Sotion/Fardriver ST721000 (500line/1000phase) on my new build paired with the FW01 and I am super excited to see how it performs. They also have a 96v coming out soon and I am most DEFINITELY throwing that on there when it does. Thanks for these videos!
Btw, great song choices during the montages! Got me adding some new guys to my library!
would have loved to see the test rides done in a blind test with the controllers covered somehow, just for another layer of quality testing.
Good idea for next time mate🤙,two of the test riders hadn't even seen a Surron before and the other both had KO controllers on their personal bikes.
Tried to make everything a fair match as much as possible where we could.
Not a bad idea I like it wish we did
I give an electrical engineers point of view and as you can see the X9000 proves it's better. I tell you what's best based on good electronics design.
I wanna build a bike too , I'd be very pleased if you help me with controller and motor ! I need help .
That’s so weird cuz I have a ko nano and I absolutely love how smooth my throttle is. Don’t know how yours feels bad. Haven’t rode a x9k but my Ko is amazing
Good to know legend!!! The main thing is, your having a epic time on your bike and that's what it's all about🤙
@@progressive_e yes sir!! It’s an absolute blast
Francis Janssen just taken a look at the video - really good.
BUT concerning the ASI BAC8000.
I think there’s light years of difference between between what customers receive from different vendors.
The controller should come plug n play, although may need a little calibration as SR are not all the same “out of the packet”: throttle and phase angles as the factory keeps pumping out inconsistent bikes.
The controllers should come with a decent mounting system. Ours come as with heavy duty mounting wings (we’ve upgraded this design three times in the last year). Strong mounts, heavy duty phase cables and waterproofing. We use 6AWG cables, our looms are proprietary to us (NOBODY) else has them. There’s little secrets to our looms which keeps the water out.
We also supply a simple but 13 page install instructions (loads of photos). Horrified in the vid to hear “cable ties” and see electrical tape - NEVER!
Take a look at the photos and video.
Take a look at our site and see the extra photos:
www.electroncycles.co.uk/product/asi-bac8000-for-sur-ron-with-loom-display-mounts-fully-assembled-and-programmed/
Hey Francis, I know your products well, super high quality. Totally agree big difference between vendors. Cable ties and tap was just a joke on our end as it was temporary.
Was a general over view of the each product, as you can tell we didn't do a tonne of detail as it's made for entertainment purposes.
One thing this comparison doesn’t mention is that neither one of these bikes batteries is enough to get the max out of a BAC 8000 which is why a controller that doesn’t require as much power would perform better but if you got that BAC8000 the amps it needs it will destroy them both on power so what packs are these bikes running I have a 20s16p molicel pack and it’s barely enough for 32kw it really needs like 25p at least 20p 1000 discharge to run comfortably
Great video idea from the double headed fellas from taz! I have zero experience with KO but a lot of experience with far driver. The best I could get my far driver to feel was around 80-90% of how the bac felt. The Bac feel would be around 80% of how my X-9k feels. Throttle to Ground feel that is. My Bac definitely benefited from using a magura throttle. Not sure why but the 0-5k pot just seemed to work a lot better. The X-9 is the only controller I would recommend for the Surron now with out a doubt. The only down side of the X-9k is the cabling apart from that it’s all thumbs up from me
Thanks legend!!! Only one of us is truely Tasmanian though🤣
Yeah jared
09:30 Hill hold assistance ain't important in my book. Your bike got brakes? And an added bonus of using brake rather then sending current into the motor is that you are not increasing motor temperature at standstill. I can't really see I would be using that feature much, definitely not important enough to switch controller. And if that is the only factor differentiating between two controllers I would swing either way if I was to buy a new controller today. For some it might be a nice to have feature, but I doubt it will be a need to have feature. How is the firmware/software for X9000? Is it all locked like on the stupid BAC's or can you easily make changes to fit your need without getting in touch with a dealer? What about the KO Pro software? Having full control over all parameters in the controller is likely the most important thing to me and is why I Sold the Bac so rapidly.
X9000 is on open source VESC control, nothing locked. You can run any motor, has 10 pre tuned motors from QS138 through to stock surron etc. Nothing like a BAC at all.
My ko pro rips. It has no problem keeping up and beating bac. Of course it's a Talaria and the others are surrons.
nice one lads, cheers well rounded vid
Y’all both have upgraded wiring? Love the music once again. I’m gonna go ahead and get that domino throttle to help my KO set up out.
Im new to the Sur Ron/Talaria world. Ive been watching a ton of videos to try and inform myself on controllers/batteries/motors. Seems like most people are running the BAC 4000. Whats the difference between the BAC 4000/8000? Of the KO, BAC, and x9000 which is the most user friendly with a chi 72v battery? Also can they be run with a stock sur ron or talaria motor - or do you need an upgraded ko motor? Ive seen a ton of videos of stock sur ron motors running upgraded controllers (mainly BAC 4000)/ 72v batteries using stock motors with no issues. Sorry for all the questions, just trying to educate myself - thank you!
what about torp 500?
Can’t say it’s 100% true, but Chinese companies do not seem to have a problem with lying and knock-off products. Just normal business practice.
So youre saying its 99% true? 🤣🤣🤣
china numba 1
Probably it's bcuz of extended swing arm
I have a KO and pushing 72v 18kw no problem 16" supermoto. Bike rips only thing I needed to do was upgrade the belt drive or whatever that cheap one is that Comes stock. I stripped the belt and bent the stock rims' first day shredding. I love you all videos, man. I use your guys' ko tune, too. It works perfectly between eco and sport mode, haha also I have the alto throttle. That shit way better than the domino!!
I can wheelie like a Mofo with that KO tune!
@@ceejroberts8900 Epic man, we spent a long time on that map dude. Stoked you like it🤙
@@ceejroberts8900 where can i find this tune? curious to test it
Better put a chain on that thing
Got the bac4000 on my surron and a spare Ko pro controller. What would you choose? the only thing that i dont like about the ko is that you can only have eco/sport switch? im currently on bac4000 and you can have 3,5,9 power levels and also got a nice apt screen in the middle.
Great video. Do you guys run the regen thumb throttle? Besides the benefits, any issues like motor or controller get hotter when using it?
Curious how the Nucular 24F would do in this comparison.
Same actually, I was trying to get one for this comparison but they aren't that easy to get in Australia.
Why would there ever be a time when you don’t have breaks? I feel that was a bad take as you would never ride with dead brakes. That’s not a thing
Iv got a bac8000 and iv got a buzzing sound coming from the bike what could it be HELP !
So I’m gonna be getting a CS20 from Estrapz. The motor is 12000w, and the battery is 72v, so the top speed is 75mph, and the max rang is 55 miles, what would you recommend?
Are you using torque or speed throttle on the X9000? You don't have the option for anything from KO. All you get is speed throttle. It will be more twitchy as a result.
What about the torp tc500
Do you think you’d get better range with the X9000?
I think it all just comes down to rider side I’ve seen people on bacs smoke x9 guys all day..
Hey guys can you put the x9000 into the xion e-bike?
You shouldn’t buy an overpriced fardriver rebrand for sure 😂😂😂
What you got bro?
@@ceejroberts8900 an original KO, you know a far driver ^^
THE HILL CONTROL WILL BE HUGE FOR ME. SO ANNOYED WITH MY KO ON THAT FRONT.
Thanks man
amazing video!!!
Thank you!!
How does x9k handle deceleration on field weakening when motor is above rated limit? Ko tends to jerk slower with max field weakening.. wondering if x9k has that too
No issue, that's a tune issue usually
@@progressive_e any advice on how to tune that out with the ko?
@@Farhan-oo6le Not really, allot of the motor smoothing is built into the firmware code. You could play with the AN setting, that's what it used to be called. AN was field weakening type
I see that Talaria in the background.
Yeah mate, we have one of them too🤣
What's holding me back is that all the product descriptions say it's only for dirt bike riding and I don't do that. I street ride and want top speed runs etc. Which should I buy?
X9000 won all the speed runs in our testing.
And remember faster doesn’t mean better 😂😂😂😂😂
U 2 look like the cutest couple 4 the LGBT community how cute 🤣
Where are real tests? Its is only talking.
I have had all 3 and I’ll tell u now regardless off what these guys are saying bac is most reliable full stop then ko ebmx coming in last with all firmware hard ware updates what a nightmare error 02 cutting when battery is on 60volts error 02 over vault I can go on and on made me sell my bike that kit did ko was too snappy but very reliable and never let me down but the good old bac is the best all rounder hands down depending who’s tuned it and if u have egg rider over the asi scree. @surron_Parts_leeds
with bac egg rider can i just turn key and go or do i have to turn a bunch of shut like display on