People, use this video. I never once looked at the manual, and just followed this video step by step. I wish more companies did this with their products, makes building these so much easier and straightforward.
I watched this video and built it all by myself and I had no idea but watching this video made me look like a pro. Thank you for this video. I am trying to figure out how to adjust the doors, but I am completely satisfied with the product and the class on how to put it all together. Thank you
No. Not with mine. The roof top won't slide into place with the snub alignment like he said. I have the shed up except the roof won't line up in place like he said we'll know it's in the right position.
I only purchased this shed because how large it is and that it came with a video. Oh boy am I happy I did because it’s perfect and was fairly easy to put together. Took about 5 hours because I have no experience with putting anything together. Didn’t even know how to use a power drill so took me much longer. You need a second person at least for the roof.
This video defanitaly made a lot easier to assemble the shed, in fact I found myself abandoning the manual and refer to the video for all the steps. Thanks for posting it.
ปีที่แล้ว +11
I thought the video tutorial was fabulous! Use the paper manual to make sure you have the correct fastener. My husband and I are in our 70's and we completed the shed in one day!
After watching this, please make sure to pay attention to how the hardware is installed on the trusses. It really makes a difference way later. Otherwise, this video was incredibly well done, and whomever in production that kept the gentleman about to crack up upon every new segment was genius. It was actually fun to watch while doing a chore. Just a well done video and a great product! Thanks!
Watching now and wondering why he wouldn't use the Phillip head end of the bolt on the outside... It would be way easier!!! I really hope there is a good reason or I'll be pretty upset for taking a longer time to install it that way.
@@G5questman believe me. It matters. Later on the whole roof won't seat properly in the most maddening way, like the kind of improper seating that screams leak! It really really mattered to me at the time because I did my base pad from scratch. I thought I was off level for a hot second. The thing is a great product, took the Floridian summer so well I forget to worry.
@@jjames3948 ok thanks for the input! I happened to have a 90° bend screwdriver I kept from another project that worked easily to install it that way so it wasn't too bad.
@@G5questman Sorry bud, but my baby is a 92 XJ. Us DIY jeep idiots have to look out for each other. If we can deal with death wobble, we can handle this.
I was gonna use the instructions that came with, it would of took me a week if I did. The video with the instructions is the key. The first couple hours I was getting scared from unpacking and doing the doors, after the doors you start to get things done lol Also I build it on a very uneven slab of concrete and very impressed that it worked out. Looks like it level and square (it can’t be though)
I finally got it put together after 3 days but it was nothing but frustration. All the roof pieces were warped by heat and the sun being summer, and unless you build it on a purely-flat surface 2x the size of the shed, it's a nightmare getting the walls and doors in place.
It would be very helpful in the video as well as the instruction manual to specify the type and size of fastener being used for each step. Particularly important when 3 different screw types and two different bolts are used for the shed assembly.
The shed ended up being nice and perfect for our needs. I used the manual and this video to assist. The only part I messed up on what forgetting to remove both side of the plexiglass covers, so I ended up losing one of the gaskets and didn't have enough extra. The roof is hard to align but is easier with 2 people and just needs some extra effort. The part about adding the sky lights, key is to definitely fold in half and go easy on screwing them in. The screw names in the book and the video are different for this part, but all you have to do is use the smaller ones that fit in the washers, then it's easy.
34:4734:47 followed both the instruction manual and the video step by step. The biggest struggle was the wall panels. Did not slide and snap in easily like he did on the video. Took us both in our 70's three days from start to finish . Just saying its not as easy as the video shows. Very frustrating from start to finish. Glad its done and hopefully stays together!
Just install mine today a lot of stuff are not label and the video skips a few thing so you definitely need to watch and read the manual, was able to put this together in about 6 hours. Also having another person does help especially doing the roof. Over all wasn’t too bad good luck.
i have been a heavy equipment mechanic for 35 yrs and am now retired my employer turn me loose on million-dollar equipment, I took one look at what tools I needed and how i will tackle this project and it took me just a little 5 hrs to finish the job life is good !!
Overall a very good shed. It would have helped greatly if the many different metal parts were labeled. The parts diagrams in the manual were often too small to be of use in deciding how to do the assembly. The wall panels did have molded in part numbers but they were at the very bottom an inch from the edge. I fixed this with a felt pen and some masking tape but it should have been done by the manufacturer. Fortunately I chose to do the shed assembly myself and was not paying a couple of guys for extra time spent as a result of these deficiencies in the manual and in the video. Even if you are having someone else assemble the shed I highly recommend taking everything out of the two large shipping boxes and labeling parts and staging everything in advance. The video cautions about overly tightening the small nuts and screws but shows a cordless drill being used. Even on the lowest torque setting and slowest speed of my cordless drill I snapped one of the screws used for the bracing. Best to tighten these very small screws by hand.
It doesn't go together as easily as the video shows at least here in Florida. The heat warps the panels and they become too hot to handle without gloves. We had to borrow the motto: Improvise, Adapt, and Overcome. It took two days to get it finished
I was doing fine until the end...the last couple of roof panels were not lining up. I think the cement pad was not completely level. I ended up using racheting straps across the top from one side to the other...in order to pull the two sides together. It worked. Thank goodness. I then braced the entire thing for $30...instead of spending $400 on the extreme weather kit.
For the walls I had to pre-screw the divots otherwise they would not dig into the second panel and have someone on the other side pushing back. Also, blocking the floor was a must.
Let me see the unedited version of this video lol. No way it’s struggle free. P.S. for every minute of this video it will take you at least half an hour.
ok my issue rn is im putting together the floor but its a newer one so the floor is a lil dif and it says each panel should have 6 divets to insurt the screws but mine on has 4?? and the floor boards wont line up nicely no matter how hard i push them together either the quality got worse or im dumb
Exactly the sam me for me!! I’ve spent over an hour on this step and the floor is trash - the old way in the video looks great! The four tab”improvement” DOES NOT WORK. I’m worried it won’t go together in future steps
Ditto here as well. Only 4 screw divots and a dozen black screws left over. Could NOT get the floor panels to lie flush to each other - had to force them and secure with screws.
This video isn’t accurate needs to show one being out together that has issues like things not lining up properly and what to do in case of these issues
I cannot for the life of me get the last roof panel to line up. Either the left side is off or the right side. And forget about the final 2 corner screws. Can’t get either to line up. Checked the walls and everything is properly locked in. Don’t know what I’m doing wrong
We're sorry to hear the roof panels aren't lining up. Try watching this video on how to align your roof panels- th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Hey do you mind sharing what did you end up doing about your roof situation? I paid someone to build the shed yesterday and we had the exact same problem. Now the shed is not finished and I don’t know what I’m going to do…
@@Chxrri-7 the key is the black trusse. Making sure not too much is hanging over either side of the the shed. While inside, push it upwards and it’ll move to properly align with screw holes. Then you should be able to slide the roofing in where the corner holes will align. Also have second push on outside where you are drilling up to to make sure it’s catching the roof with the screw. Took us some giggling but it ended up seamless
Most of the time, the bag is labeled. Sometimes the smaller hardware bag is not labeled because it's in a larger, labeled, hardware bag. If you're having a hard time figuring out which screw is the right one, you can match it up to the picture in the manual. The images of the hardware (most screws, nuts, bolts, and washers), are to scale.
The flooring in this video is nothing like what came in my package - the video floor looks great and snapped together with ease…. Mine was WAY different with only three offset tabs and a few screws - offsets absolutely do not line up - I have tried MANy things. I went ahead and screwed it together with one inch gaps on each edge…. I expect it will be horrible later, but I have spent too many hours on this terrible step
This is too funny 😂 I just put mine bottom part together with a buddy and I said the same thing. Drinking while putting this together does not help by the way!
We recommend a pressure treated wood platform or concrete pad. Refer to your manual in section 1 for the instructions on how to do that. If you have any questions regarding the foundation, contact our customer service team. They can be reached out 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday 7:00 am to 5:00 pm and Saturday 9:00 am to 1:00 pm (MT).
Does anyone have any suggestion to make the floor more cleaning friendly. I'm puzzled as to why they would make the floor have fake separations between the "boards." All it wants to do it catch dirt and it's a royal pain to try and clean. Silly design.
As a warning, your manual may point you to this video but it may not match 100%. Mine linked here but is clearly a newer model because some of the parts differ and the references to part numbers differ as well. It's close enough that you can figure things out and refer to the manual, but it's a bit strange that they don't mention it up front. He says a ton of things in this video that the manual skips over, but oddly leaves out a ton of things too. You'll need to refer back and forth.
When attaching the vents on the gable, it’s not clear which screws to use. I got them out of order using the big ones first and I think I screwed things up. And there are at least two bags of hardware, which is the instructions not made clear, I found the other one on the bottom. Horrible attention to detail, now I’m gonna have to go down to the hardware store and get more screws.
On the right side of the video it shows all the hardware that will be used for the steps. Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Wait a sec, so you put all the phillips screw heads on the inside where a straight screwdriver can't reach them? The solution is a Phillips bit and a pair a Vice Grips?! Engineering at its finest.
We're sorry to hear the roof panels aren't lining up. Try watching this video on how to align your roof panels- th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
The part requiring flat tipped screws be drilled at a 45 degree angle into shallow divets that are not well designed to be entered at 45 degree angles is the reason I'm not going to buy another lifetime product requiring assembly. Your engineers took the day off when designing this part.
Bad luck for me the most of the holes in the gables pieces are missed aligned I have to ask the company to send me different pieces, the drill bit provided to drill holes for the door is broken during the assembly the video made it so easy to put it together with the exception of the pieces are nice and fit in together after 2 days of trying I am handed over to the pro . Does any one no how much it cost? Thanks
I'm sorry that you're having troubles with the build. I am happy to send out any pieces you need replaced. I am also happy to take a look at some of the issues you were having during the build so we can trouble shoot some ideas on how to make the assembly easier for you. You can send images over to youtube@lifetime.com with contact information. If you're still wanting a installation expert to finish the assembly for you, you can contact our coordinators at 1-800-336-3865 opt 1. They will let you know if there is coverage in your area and will give you a quote.
Sam's Club has this shed on display but I had a hard time buying it bc it wasn't in their system. Then got home and no instructions s or directives. Sam's Club had a hard time even finding and telling me what to do. Please get this corrected
Sorry to hear this. Please reach out to our customer service team to get this issue resolved. They can be reached by phone at +1 (800) 242-3865 or by email at customercare@lifetime.com.
Is the window supposed to to be open-able? If so, why put a screw in the bottom? If not, why does it have latches and why not just have a bunch of screws around the edge like the door windows? Or is this an either/or window?
Thank you for pointing this out! It looks like the 3 letter ID has been updated since this video was made. We will work on making a new video that is up to date. The assembly will still be the same, you will just need to make sure that you have the manual on hand to see the correct 3 letter ID. If you have any other questions or concerns, please reach out to us at youtube@lifetime.com.
This does not go together as easily as you video and the bar that is on the uprise above the door was the same as the back exactly the same plus this video was slightly helpful also still trying to put it together and this is day 2
Replacement parts are available and can be ordered through our customer service department. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Honestly hate how the company assumes that I get internet or phone service where I live to watch a TH-cam video instead of just including all the steps on the paper manual. The frustration over the last couple of hours just wait for the video to load was too much.
We're sorry to hear this. We try not to make any assumptions about how you prefer to assemble your product. We try to include as many help options as possible, which is why we have our assembly videos and QR codes in the manual. The video is meant to be a companion to the assembly manual, not a replacement, but you don't have to use the video. All of the steps of the assembly are in the manual.
Try reaching out to our customer service experts to troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
What kind of foundation do you have the shed built on? Maybe check out our video on aligning your roof panels. Here's the link: th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK
This shed is the biggest piece of garbage on the market. The pieces come warped making it nearly impossible to put together. The manual doesn’t explain nothing in depth, and this video is misleading. If you are going to build this shed you will indefinitely need a few hands to help you and pray for a miracle that everything goes well because this shed is a can of worms.
We are sorry to hear that you are not happy with your new shed. We're sorry that pieces came warped, this shouldn't have been the case. Please reach out to us directly at youtube@lifetime.com so that we can try to take care of this for you.
We're sorry to hear that you had troubles with assembly and getting things to line up. Give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Never has a video had so much detail and information, yet show nothing of value. You can’t see the angles of where the roof is supposed to be. There’s a dozen holes on the ceiling pieces and this video does not show where they’re supposed to go.
The assembly video is meant to by used as a companion to the assembly manual and not a direct replacement. We recommend having the assembly manual on hand while building. The assembly manual shows a lot more detail and can show you exactly which holes the screws go into for each step.
I was suspicious to use an impact driver with plastic like this, but tried it. NOPE. Too powerful for it. I switched to a drill with an adjustable clutch.
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](/img/n.gif)
Section 1: Refer to your manual
Section 2
02:13 | Step 2.1
02:19 | Step 2.2
03:00 | Step 2.3
03:06 | Step 2.4
03:40 | Step 2.5
03:46 | Step 2.6
Section 3
05:14 | Step 3.1
05:24 | Step 3.2
05:39 | Step 3.3
05:45 | Step 3.4
06:06 | Step 3.5
06:22 | Step 3.6
06:31 | Step 3.7
06:45 | Step 3.8
06:52 | Step 3.9
07:22 | Step 3.10
07:48 | Step 3.11
08:00 | Step 3.12
08:10 | Step 3.13
08:32 | Step 3.14
Section 4
09:00 | Step 4.1
09:32 | Step 4.2
09:45 | Step 4.3
10:02 | Step 4.4
10:23 | Step 4.5
11:06 | Step 4.6
11:11 | Step 4.7
11:26 | Step 4.8
11:39 | Step 4.9
12:21 | Step 4.10
12:41 | Step 4.11
Section 5
13:02 | Step 5.1
13:15 | Step 5.2
13:32 | Step 5.3
14:17 | Step 5.4
14:22 | Step 5.5
14:45 | Step 5.6
15:04 | Step 5.7
15:33 | Step 5.8
15:45 | Step 5.9
Section 6
16:06 | Step 6.1
16:19 | Step 6.2
16:30 | Step 6.3
16:48 | Step 6.4
Section 7
17:34 | Step 7.1
18:36 | Step 7.2
18:46 | Step 7.3
19:02 | Step 7.4
19:23 | Step 7.5
19:52 | Step 7.6
20:03 | Step 7.7
20:12 | Step 7.8
20:21 | Step 7.9
20:43 | Step 7.10
21:04 | Step 7.11
21:33 | Step 7.12
22:01 | Step 7.13
22:23 | Step 7.14
22:51 | Step 7.15
Section 8
23:26 | Step 8.1
23:42 | Step 8.2
23:58 | Step 8.3
Section 9
24:27 | Step 9.1
24:54 | Step 9.2
25:19 | Step 9.3
25:41 | Step 9.4
25:54 | Step 9.5
Section 10
26:12 | Step 10.1
26:29 | Step 10.2
26:34 | Step 10.3
26:48 | Step 10.4
27:06 | Step 10.5
27:20 | Step 10.6
27:54 | Step 10.7
28:55 | Step 10.8
29:29 | Step 10.9
30:12 | Step 10.10
31:32 | Step 10.11
Section 11
32:26 | Step 11.1
Section 12
32:44 | Step 12.1
32:53 | Step 12.2
33:07 | Step 12.3
33:13 | Step 12.4
Section 13: th-cam.com/video/Q5VKLwsfb5A/w-d-xo.html
Section 14: Refer to your manual.
P0c
Okay
@@terrancesullivan58940:06 ❤
0:06
0:06
This video is literally the only way to properly build this product. The manual is nearly worthless. Great video. Made the process so much faster.
I second that the Manual is worthless. Built it myself but could never have done it without video.
If I didn't find this video I would have returned this as the Manual is utter garbage 😂. Finishing up today can't wait to be done.
They sent me 3 middle pieces for the flooring.. I thought I was going crazy, plus my pieces weren’t labeled correctly.. never again
People, use this video. I never once looked at the manual, and just followed this video step by step. I wish more companies did this with their products, makes building these so much easier and straightforward.
I watched this video and built it all by myself and I had no idea but watching this video made me look like a pro. Thank you for this video. I am trying to figure out how to adjust the doors, but I am completely satisfied with the product and the class on how to put it all together. Thank you
What did you do about the base?
Great product, easy to setup! Did it in about 4.5 hours. Everything fit together super well. Would buy again
No. Not with mine. The roof top won't slide into place with the snub alignment like he said. I have the shed up except the roof won't line up in place like he said we'll know it's in the right position.
I've tried turning around the Truss and the peg won't line up in the right position
I only purchased this shed because how large it is and that it came with a video. Oh boy am I happy I did because it’s perfect and was fairly easy to put together. Took about 5 hours because I have no experience with putting anything together. Didn’t even know how to use a power drill so took me much longer. You need a second person at least for the roof.
This video defanitaly made a lot easier to assemble the shed, in fact I found myself abandoning the manual and refer to the video for all the steps. Thanks for posting it.
I thought the video tutorial was fabulous! Use the paper manual to make sure you have the correct fastener. My husband and I are in our 70's and we completed the shed in one day!
Such a helpful video! would have taken so much longer without it. Thank you!
I’m not handy at all. This video saved me. It took me 2 days but combined with the manual the shed was easy to construct.
They are right about the lifetime shed it takes a lifetime to put it together
Skill issue
Yes many hours of work, skilled or not.
No kidding.
After watching this, please make sure to pay attention to how the hardware is installed on the trusses. It really makes a difference way later. Otherwise, this video was incredibly well done, and whomever in production that kept the gentleman about to crack up upon every new segment was genius. It was actually fun to watch while doing a chore. Just a well done video and a great product! Thanks!
Watching now and wondering why he wouldn't use the Phillip head end of the bolt on the outside... It would be way easier!!! I really hope there is a good reason or I'll be pretty upset for taking a longer time to install it that way.
@@G5questman believe me. It matters. Later on the whole roof won't seat properly in the most maddening way, like the kind of improper seating that screams leak! It really really mattered to me at the time because I did my base pad from scratch. I thought I was off level for a hot second. The thing is a great product, took the Floridian summer so well I forget to worry.
@@jjames3948 ok thanks for the input! I happened to have a 90° bend screwdriver I kept from another project that worked easily to install it that way so it wasn't too bad.
@@G5questman Sorry bud, but my baby is a 92 XJ. Us DIY jeep idiots have to look out for each other. If we can deal with death wobble, we can handle this.
@@jjames3948 heck yeah man. I just don't always trust people in videos to do the stuff the easiest way lol.
Our shed turned out great thanks
I was gonna use the instructions that came with, it would of took me a week if I did. The video with the instructions is the key.
The first couple hours I was getting scared from unpacking and doing the doors, after the doors you start to get things done lol
Also I build it on a very uneven slab of concrete and very impressed that it worked out. Looks like it level and square (it can’t be though)
I finally got it put together after 3 days but it was nothing but frustration. All the roof pieces were warped by heat and the sun being summer, and unless you build it on a purely-flat surface 2x the size of the shed, it's a nightmare getting the walls and doors in place.
Was a very big help great job 👏🏾 on this video
Glad it helped!
It would be very helpful in the video as well as the instruction manual to specify the type and size of fastener being used for each step. Particularly important when 3 different screw types and two different bolts are used for the shed assembly.
You are correct. The instructions should have that.
The shed ended up being nice and perfect for our needs. I used the manual and this video to assist. The only part I messed up on what forgetting to remove both side of the plexiglass covers, so I ended up losing one of the gaskets and didn't have enough extra. The roof is hard to align but is easier with 2 people and just needs some extra effort.
The part about adding the sky lights, key is to definitely fold in half and go easy on screwing them in. The screw names in the book and the video are different for this part, but all you have to do is use the smaller ones that fit in the washers, then it's easy.
Very helpful video and easy to install
Omg can you guys please label things in the box?! And maybe also say in instructions which box they are in
This video helped me out so much 😊
34:47 34:47 followed both the instruction manual and the video step by step. The biggest struggle was the wall panels. Did not slide and snap in easily like he did on the video. Took us both in our 70's three days from start to finish . Just saying its not as easy as the video shows. Very frustrating from start to finish. Glad its done and hopefully stays together!
You're the best and amazing at building!!
I found the manual and video very easy to understand I don't get why it's so hard for everyone 😂
Thank god I found this video ..👍
Just install mine today a lot of stuff are not label and the video skips a few thing so you definitely need to watch and read the manual, was able to put this together in about 6 hours. Also having another person does help especially doing the roof. Over all wasn’t too bad good luck.
i have been a heavy equipment mechanic for 35 yrs and am now retired my employer turn me loose on million-dollar equipment, I took one look at what tools I needed and how i will tackle this project and it took me just a little 5 hrs to finish the job life is good !!
Took me all total... about 12, with help. Good on you. Impressive.
Overall a very good shed. It would have helped greatly if the many different metal parts were labeled. The parts diagrams in the manual were often too small to be of use in deciding how to do the assembly. The wall panels did have molded in part numbers but they were at the very bottom an inch from the edge. I fixed this with a felt pen and some masking tape but it should have been done by the manufacturer.
Fortunately I chose to do the shed assembly myself and was not paying a couple of guys for extra time spent as a result of these deficiencies in the manual and in the video. Even if you are having someone else assemble the shed I highly recommend taking everything out of the two large shipping boxes and labeling parts and staging everything in advance.
The video cautions about overly tightening the small nuts and screws but shows a cordless drill being used. Even on the lowest torque setting and slowest speed of my cordless drill I snapped one of the screws used for the bracing. Best to tighten these very small screws by hand.
That is a good looking shed! I love that brand too!
This video did really helped us a lot ❤❤ THANK YOU
It doesn't go together as easily as the video shows at least here in Florida. The heat warps the panels and they become too hot to handle without gloves. We had to borrow the motto: Improvise, Adapt, and Overcome. It took two days to get it finished
Parts are not labeled and the wall install should be numbered/labeled from which corner to begin. Thank god for the video.
I was doing fine until the end...the last couple of roof panels were not lining up. I think the cement pad was not completely level. I ended up using racheting straps across the top from one side to the other...in order to pull the two sides together. It worked. Thank goodness. I then braced the entire thing for $30...instead of spending $400 on the extreme weather kit.
❤️
You don't by chance have any pictures of your bracing or a description of what you did?
I measured the pieces, and they are not even. I had the same problem at the end with just the last piece.
Hi, I bought two of this and they are good so far (if I need something better I know that I have to pay a lot!)
For the walls I had to pre-screw the divots otherwise they would not dig into the second panel and have someone on the other side pushing back. Also, blocking the floor was a must.
This video was a God Send lol
Let me see the unedited version of this video lol. No way it’s struggle free.
P.S. for every minute of this video it will take you at least half an hour.
Awesome & very helpful video!!
ok my issue rn is im putting together the floor but its a newer one so the floor is a lil dif and it says each panel should have 6 divets to insurt the screws but mine on has 4?? and the floor boards wont line up nicely no matter how hard i push them together either the quality got worse or im dumb
Exactly the sam me for me!! I’ve spent over an hour on this step and the floor is trash - the old way in the video looks great! The four tab”improvement” DOES NOT WORK. I’m worried it won’t go together in future steps
Same!
Ditto here as well. Only 4 screw divots and a dozen black screws left over. Could NOT get the floor panels to lie flush to each other - had to force them and secure with screws.
Thank you
Watch this video!!! Forget about the manual. Did it myself in 6hrs. Could’ve done it a little faster with a partner. (Help isn’t necessary)
This video isn’t accurate needs to show one being out together that has issues like things not lining up properly and what to do in case of these issues
I would like to see the Guy put this shed together outside with the wind blowing in the Sun.
My manual was missing 7.10 through 7.15! Please keep the manual up-to-date with the video and construction.
We would like to look into this further. Please reach out to us at youtube@lifetime.com.
Great video ! Product on the other hand came with wrong sized nuts and the life time sticker on the door upside down.
That's weird. Send us an email at youtube@lifetime.com so that we can look into this further and send this along to our quality team.
I cannot for the life of me get the last roof panel to line up. Either the left side is off or the right side. And forget about the final 2 corner screws. Can’t get either to line up. Checked the walls and everything is properly locked in. Don’t know what I’m doing wrong
We're sorry to hear the roof panels aren't lining up. Try watching this video on how to align your roof panels- th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Hey do you mind sharing what did you end up doing about your roof situation? I paid someone to build the shed yesterday and we had the exact same problem. Now the shed is not finished and I don’t know what I’m going to do…
@@Chxrri-7 the key is the black trusse. Making sure not too much is hanging over either side of the the shed. While inside, push it upwards and it’ll move to properly align with screw holes. Then you should be able to slide the roofing in where the corner holes will align. Also have second push on outside where you are drilling up to to make sure it’s catching the roof with the screw. Took us some giggling but it ended up seamless
Why are screws not labeled on the bags they come in? It’s a guessing game trying to find the right one!
Most of the time, the bag is labeled. Sometimes the smaller hardware bag is not labeled because it's in a larger, labeled, hardware bag. If you're having a hard time figuring out which screw is the right one, you can match it up to the picture in the manual. The images of the hardware (most screws, nuts, bolts, and washers), are to scale.
The flooring in this video is nothing like what came in my package - the video floor looks great and snapped together with ease…. Mine was WAY different with only three offset tabs and a few screws - offsets absolutely do not line up - I have tried MANy things. I went ahead and screwed it together with one inch gaps on each edge…. I expect it will be horrible later, but I have spent too many hours on this terrible step
Same!
This is too funny 😂 I just put mine bottom part together with a buddy and I said the same thing. Drinking while putting this together does not help by the way!
You have to absolute flat surf🎉
What’s the recommendation for the base? Preferably something DIY?
We recommend a pressure treated wood platform or concrete pad. Refer to your manual in section 1 for the instructions on how to do that. If you have any questions regarding the foundation, contact our customer service team. They can be reached out 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday 7:00 am to 5:00 pm and Saturday 9:00 am to 1:00 pm (MT).
Can I put the window on the opposite side?
Yes it can!
Bro has no idea he's an internet celebrity with 260k views!
Does anyone have any suggestion to make the floor more cleaning friendly. I'm puzzled as to why they would make the floor have fake separations between the "boards." All it wants to do it catch dirt and it's a royal pain to try and clean. Silly design.
Vacuum
I put a cheap snap together vinyl over mine
@@scottieshawn4814 fair
Can the window panel fit on either side?
As a warning, your manual may point you to this video but it may not match 100%. Mine linked here but is clearly a newer model because some of the parts differ and the references to part numbers differ as well. It's close enough that you can figure things out and refer to the manual, but it's a bit strange that they don't mention it up front. He says a ton of things in this video that the manual skips over, but oddly leaves out a ton of things too. You'll need to refer back and forth.
When attaching the vents on the gable, it’s not clear which screws to use. I got them out of order using the big ones first and I think I screwed things up. And there are at least two bags of hardware, which is the instructions not made clear, I found the other one on the bottom. Horrible attention to detail, now I’m gonna have to go down to the hardware store and get more screws.
On the right side of the video it shows all the hardware that will be used for the steps. Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
@@LifetimeProductsAssembly and the screws for the latch, the sliding part, were the wrong ones. I can get the right ones at the hardware store.
Wait a sec, so you put all the phillips screw heads on the inside where a straight screwdriver can't reach them? The solution is a Phillips bit and a pair a Vice Grips?! Engineering at its finest.
Just bought it and missing all section 2 parts
Thinking about adding electrical to this item. Any comments about this idea?
Our sheds are not designed to accommodate electrical wiring of any kind. Unfortunately, any modifications made to the shed will void your warranty.
Can this withstand extreme heat like 115 degrees without cracking?
Excellent job. Do you have a video for the 8x10 shed?
What model number are you looking for?
Is it normal to have several of those ADZ screws leftover???
Yes! They're there in caution.
Why when sliding the roof panels in they wont line up? What then?
We're sorry to hear the roof panels aren't lining up. Try watching this video on how to align your roof panels- th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
The part requiring flat tipped screws be drilled at a 45 degree angle into shallow divets that are not well designed to be entered at 45 degree angles is the reason I'm not going to buy another lifetime product requiring assembly. Your engineers took the day off when designing this part.
The pack of adhesive rolls what are they used for. Not referring to the thin rolls for the windows.
The windows on the front doors
Bad luck for me the most of the holes in the gables pieces are missed aligned I have to ask the company to send me different pieces, the drill bit provided to drill holes for the door is broken during the assembly the video made it so easy to put it together with the exception of the pieces are nice and fit in together after 2 days of trying I am handed over to the pro . Does any one no how much it cost? Thanks
I'm sorry that you're having troubles with the build. I am happy to send out any pieces you need replaced. I am also happy to take a look at some of the issues you were having during the build so we can trouble shoot some ideas on how to make the assembly easier for you. You can send images over to youtube@lifetime.com with contact information. If you're still wanting a installation expert to finish the assembly for you, you can contact our coordinators at 1-800-336-3865 opt 1. They will let you know if there is coverage in your area and will give you a quote.
Why the heck are the adz screws not labled?
Which assembly video is closely resembled for model 60425 from BJ’s?
Use this video: th-cam.com/video/y2n0RqepG9g/w-d-xo.html. There's some differences so make sure you have your manual with you the whole time.
Can you put the window on the other side?
Yes, you can put both window wall panel on either side.
Sam's Club has this shed on display but I had a hard time buying it bc it wasn't in their system. Then got home and no instructions s or directives. Sam's Club had a hard time even finding and telling me what to do. Please get this corrected
Sorry to hear this. Please reach out to our customer service team to get this issue resolved. They can be reached by phone at +1 (800) 242-3865 or by email at customercare@lifetime.com.
@@LifetimeProductsAssembly This video saved us. The man finally found instructions in box
Is the window supposed to to be open-able? If so, why put a screw in the bottom? If not, why does it have latches and why not just have a bunch of screws around the edge like the door windows? Or is this an either/or window?
Yes, the window does open. The screw goes into the window panel but not into the wall panel to keep the window pane up when it is opened.
How do one open the window.
@@gardeniaburton5125it slides
17:00 wanna point out my screws, according to the instructions was in bag HJK not BQH. Had me searching for a minute
Thank you for pointing this out! It looks like the 3 letter ID has been updated since this video was made. We will work on making a new video that is up to date. The assembly will still be the same, you will just need to make sure that you have the manual on hand to see the correct 3 letter ID. If you have any other questions or concerns, please reach out to us at youtube@lifetime.com.
This does not go together as easily as you video and the bar that is on the uprise above the door was the same as the back exactly the same plus this video was slightly helpful also still trying to put it together and this is day 2
what is the size for the foundation if I need to do it ?
The foundation needs to be at least the same size of the shed, so in this case it would need to be at least 8' x 7.5'.
@@LifetimeProductsAssemblywhats wrong with having it on flat ground?
I'm missing a bag. What should I do?
Replacement parts are available and can be ordered through our customer service department. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
How big should the foundation be? What dimensions?
You will need to build a level surface of 93
3/4" x 88 3/16" (2,38 m 2,24 m). If you are building with concrete, make sure its 4" thick.
My wife just told me she is leaving me for John. Honestly I can't blame her.
Unfortunately, John already left us... 😭
How do I attach it to the floor joists?
Could've at least showed the screws before you torque them in.......
Hi I’m in Northern California how much should I pay a handyman to assemble the shed ? Thx
To inquire about assembly contact our customer service team at 800-424-3865 for scheduling.
@@LifetimeProductsAssembly thank you
My shelf is too short. And has no flap
Honestly hate how the company assumes that I get internet or phone service where I live to watch a TH-cam video instead of just including all the steps on the paper manual. The frustration over the last couple of hours just wait for the video to load was too much.
We're sorry to hear this. We try not to make any assumptions about how you prefer to assemble your product. We try to include as many help options as possible, which is why we have our assembly videos and QR codes in the manual. The video is meant to be a companion to the assembly manual, not a replacement, but you don't have to use the video. All of the steps of the assembly are in the manual.
Finished this shed in 6.5 hrs video is good but manual sucks !
What about the numbers in the roof top
Why are my truss’ uneven?!
Try reaching out to our customer service experts to troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
How big are the boxes?
BOX 1 (95.31" x 32" x 10.75"; 147.5 lbs)
BOX 2 (95.31" x 32" x 9.63"; 218 lbs)
Can’t fit one atv
What a piece of junk. Wife bought this. After it blows away I’ll build a real one. Grandchild’s Barbie House is stronger.
Your bag letters don’t match instructions
What is the music playing in this?
The music is from soundstripe.com.
@@LifetimeProductsAssembly do you know what the track is called? I'm almost done putting the shed together and the music would really help.
None of my roof panels line up or fit
What kind of foundation do you have the shed built on? Maybe check out our video on aligning your roof panels. Here's the link: th-cam.com/video/iQYsra3ehts/w-d-xo.htmlsi=qptvvpzaxJnvzPpK
Hey may a I ask you what did you end up doing about your roof situation? I’m having the same issue!!
Can I buy this product in Japan?
For Inquires on where to find and purchase our products in your area, email us at intlsales@lifetime.com.
Yokohama-city kanagawa prefecture. Please tell me the inside dimensions of the warehouse where you want to put your motorcycle.
@@taka6281 7 ft. L x 7 ft. 6 in. W x 5 ft. 10 in. - 7 ft. 10 in. H
The hardware provided is total crap
So easy you can build it yourself....🙄 RiIIIGGHHT
Building this thing SUCKED.
This shed is the biggest piece of garbage on the market. The pieces come warped making it nearly impossible to put together. The manual doesn’t explain nothing in depth, and this video is misleading. If you are going to build this shed you will indefinitely need a few hands to help you and pray for a miracle that everything goes well because this shed is a can of worms.
We are sorry to hear that you are not happy with your new shed. We're sorry that pieces came warped, this shouldn't have been the case. Please reach out to us directly at youtube@lifetime.com so that we can try to take care of this for you.
This was the worst shed I've ever assembled. Nothing lines up! Nothing! Please stay away from this product!
We're sorry to hear that you had troubles with assembly and getting things to line up. Give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).
Never has a video had so much detail and information, yet show nothing of value. You can’t see the angles of where the roof is supposed to be. There’s a dozen holes on the ceiling pieces and this video does not show where they’re supposed to go.
The assembly video is meant to by used as a companion to the assembly manual and not a direct replacement. We recommend having the assembly manual on hand while building. The assembly manual shows a lot more detail and can show you exactly which holes the screws go into for each step.
Uh specify
Was anyone else’s boxes filled with roaches and roach poop? It was disgusting!
I was suspicious to use an impact driver with plastic like this, but tried it. NOPE. Too powerful for it. I switched to a drill with an adjustable clutch.
😮😮😮😮l
Alot of the time spent putting this together could have been done at factory before purchase. Guess it's free labor for them. Horrible product.