I love your equipment; more than adequate for any job. Excellent demonstration on performing and aligning the master crystal and getting the radio well within specifications," congratulations " on a tricky setup.
I've really enjoyed this video. It would be interesting to see how the power of the output final amplifier could be adjusted, from 129.5W to 99.5W. But, as you mentioned the owner didn't want this :). Many thanks, Kostas.
Awesome job Peter! Those little variable caps in the oscillator section sure are touchy. If they didn't drift a little, they would never sell any TCXO options :^) I think they should just make that option a standard in all HF radios.
Mr Carlson's Lab I agree, living in the north in a house not well insulated. It can get cold in some rooms throwing my equipment off. Right now i am working on adapting a TCXO in to a older frequency counter and installing one in a ts-450Sat
Mr Carlson's Lab Hi Paul, glad that you like it! Yes you are right this caps are absolutely touchy but with some endurance it works:-) I agree TCXO should be minimum as basic configuration. The newer radios mid class and higher have it now..
@@TRXLab Thank you So very much ,Great video,,I have a quick question,In the Auto tuner.There are 2 ,,,5 -+ inch,coax, jumpers.Are they to run parallel (ie left to left,R to R) or criss cross? I went in to the Auto tuner to clean all coax jumpers ends and not sure if I put them back correctly..Thank you very much.N1RAJ 73s
I really enjoyed watching your work. I am not technical ... more of an appliance operator :) ... but I followed carefully your tests and adjustments and learned a lot. Thank you for sharing your video. Thumbs way up!
Peter, Thank you for the reply. I have ordered the LP-500. Great review video, Larry should put you on his marketing staff. So glad I have found your channel. 73 George N2SQ Sarasota, FL
I'm surprised that Kenwood didn't fit a better quality trimmer for TC500, that is too coarse. A varactor diode, and multiturn precision trimpot would have been better. Incidentally, I once had a OM complain to me because a radio I'd repaired (it was a FT757) didn't read exactly the same digits as the guy he was chatting with.... I had to explain to him about tolerances and drift!! Also a fundamental problem with digital displays; I asked him if he would expect to measure millimeters to 3 decimal places with an old wooden ruler. He said 'no'... Thank you for yet another excellent video :)
Alan Cordwell Hi Alan, yeah I totally agree thy could do it better but it is all about cost cutting to many bean counters in the process.. Like it with the old wooden ruler:-) that exactly the point! Thanks for feed back!
Another great job Peter...Most crystal radios do move frequency with time.You did a great job getting it back to within 1 hertz.Shame about the Finals the Kenwood is really being pushed at 130 watts ...That could be another repair for a later date.
Great video plus great rig. Have one and I just love it. Only problem with mine is the antenna turner not operating so am using an external turner at this time.
Hi Peter, sounds like there wasnt very much wrong with the radio in the first place, frequency little bit off about all, thought the RF out power was too high, thought 100 would have been better, i have a valve amp, Heathkit sb 200 and only put 100 max into that....good video...from Fred G4Vvq in UK.
Tom Smith Hi Fred, yes you are right not much wrong but 130Hz frequency error in SSB is a lot. You can already hear 50HZ. In FM it is totally different no problems with 130 Hz out. Well 130 Watt is too much stress for the finals. I have to ask what kind of amplifier he is using. RX sensitivity is really a subjective value until you have the radio in lab.. Thanks for feed -back . 73 Peter
Hi Peter. I have lost my adjustment tool for the special trim pots like the one on the reference adjustment. Do you have this tool and if so where can I buy one. I have looked all over the net. I find the usual alignment tools but none that allow you to adjust these tamper proof adjustments. Thanks for the video.
I wonder if the OM has a faulty cable or something, which is why he thought the radio was down on power as well as deaf. I'm struggling to believe that a tube amplifier would require that much drive- they typically have a power gain of at least 10dB so to give the maximum legal output here in the UK of 26dBW would only require 16 dbW (40 watts!!) drive... but you know, the customer is always right!!!
Alan Cordwell Well yes that could be a reason, I'm going to recommend him testing his set up, cables, connectors, antenna and what have we... The topic with the Amp is not clear to me, too. I don't know a linear which need 130W drive?? I have to ask him...
Hi there Peter, i have 2 Icom IC 7000's if you ever have chance to do a video on one of those it would be interesting to me, they have several problems with them at times...from Fred in england
good job i always enjoy watching your videosWhen you test from the antenna jack are you in CW or AM? how would you compare the receive of a TS-2000 to the TS-570
Matt K Hi Matt, thanks for feed back. When I'm testing from the antenna jack it depends on the problem the radio has but in this case, as it was a frequency error, I tested in FM. In lab environment the TS-570 shows a better picture but that is not an on air test is important as well and an IP3 test should be performed.
petter can you help need some advice ive got same radio ive got intermitting power drop on ssb modes drops to around 10 w when set on 100w fm mode always fine where do i start looking thanks paul
Had a fault with my old TS570 that you could not tune in SSB properly it took a bit of time to find it turned out to be the analog to digital jumper with bad soldering !
HI. TRXBench. Thats a nice video. Do you have an idea why the CAT communication of my TS570D freezes after I send the "IF" command ? (All other commands e.G. "FA" work fine) . Thank you.
Wolfgang S. Hallo Wolfgang, mir ist dieser Fehler nicht bekannt. Falls der IF Command nicht "verstümmelt" ist, würde ich mal über die Kenwood Seite nachschauen, ob es ein firm-ware update für dein Gerät gibt. ..73
Peter, Most excellent video. I thank you, I learned so much from you. I need to acquire a good power/SWR meter for my station, any recommendations for me. George N2SQ
Thank you George glad that you like my videos. Well a good power/swr meter...it always depend on the budget but have you considered the LP100 or LP500 as you can find in my video #41 and #113.. All the best 73s
Hello Friend. Please help me with a difficult choice. I want to buy a Kenwood transceiver and i have to choose between TS-480SAT and TS-570DG. Both are second hand. Thanks in advance. 73!
Tolles Video, ich habe das gleiche Gerät und bin damit eigentlich zufrieden. Allerdings vermute ich, daß es einmal überholt werden sollte. Leider habe ich nicht das passende Equipment und leider auch noch zwei linke Hände:( Kann ich dich kontaktieren für eine mögliche Reparatur bzw. einen Check? Mein QTH ist Frankfurt am Main (JO40FC)
I love your equipment; more than adequate for any job. Excellent demonstration on performing and aligning the master crystal and getting the radio well within specifications," congratulations " on a tricky setup.
+John Cunningham Hi John, thanks for your feed back and thanks for watching 73
I've really enjoyed this video. It would be interesting to see how the power of the output final amplifier could be adjusted, from 129.5W to 99.5W. But, as you mentioned the owner didn't want this :). Many thanks, Kostas.
+Kostas Hi Kostas, thanks for feed-back. Yeah the owner didn't want me to adjust it...
Awesome job Peter! Those little variable caps in the oscillator section sure are touchy. If they didn't drift a little, they would never sell any TCXO options :^) I think they should just make that option a standard in all HF radios.
Mr Carlson's Lab I agree, living in the north in a house not well insulated. It can get cold in some rooms throwing my equipment off. Right now i am working on adapting a TCXO in to a older frequency counter and installing one in a ts-450Sat
Sounds neat, keep us posted with the results. Would be neat to watch it's stability on a counter.
Mr Carlson's Lab Hi Paul, glad that you like it! Yes you are right this caps are absolutely touchy but with some endurance it works:-) I agree TCXO should be minimum as basic configuration. The newer radios mid class and higher have it now..
Matt K Hi Matt, yeah TCXO is minimum! Keep us posted!
@@TRXLab Thank you So very much ,Great video,,I have a quick question,In the Auto tuner.There are 2 ,,,5 -+ inch,coax, jumpers.Are they to run parallel (ie left to left,R to R) or criss cross? I went in to the Auto tuner to clean all coax jumpers ends and not sure if I put them back correctly..Thank you very much.N1RAJ 73s
I really enjoyed watching your work. I am not technical ... more of an appliance operator :) ... but I followed carefully your tests and adjustments and learned a lot. Thank you for sharing your video. Thumbs way up!
Thank you Michael, glad that you liked my videos! All the best 73
Peter, Thank you for the reply. I have ordered the LP-500. Great review video, Larry should put you on his marketing staff. So glad I have found your channel. 73 George N2SQ Sarasota, FL
You are welcome and the LP-500 is a great unit! wish you a very good holiday season. 73
I'm surprised that Kenwood didn't fit a better quality trimmer for TC500, that is too coarse. A varactor diode, and multiturn precision trimpot would have been better. Incidentally, I once had a OM complain to me because a radio I'd repaired (it was a FT757) didn't read exactly the same digits as the guy he was chatting with.... I had to explain to him about tolerances and drift!! Also a fundamental problem with digital displays; I asked him if he would expect to measure millimeters to 3 decimal places with an old wooden ruler. He said 'no'... Thank you for yet another excellent video :)
Alan Cordwell Hi Alan, yeah I totally agree thy could do it better but it is all about cost cutting to many bean counters in the process.. Like it with the old wooden ruler:-) that exactly the point! Thanks for feed back!
Great video & great info as a tech we all love this kind of info & keep us in focus on what we are doing & updated Regads.
+Patricio Giron Hi Patricio, thanks for feed -back. 73
Always look forward to your vids Peter.. Very informative as usual. Thank you.
John
***** Hi John, thanks for watching my friend
great to watch an expert at work sheer joy with much learning :)
Thanks John for all your kind comments! I have read them all but can't answer to all! Glad that you like my videos! 73
Another great job Peter...Most crystal radios do move frequency with time.You did a great job getting it back to within 1 hertz.Shame about the Finals the Kenwood is really being pushed at 130 watts ...That could be another repair for a later date.
charlieoscar09 Thanks, yeah you are right it might be back on my bench with faulty finals...
Keep on sharing your work. Very interesting video as always. Karl.
Karl Fell Hi Karl. glad that you like it.
Great work Peter.
What a great radio.
Another great video. Thanks for sharing it with us.
technos123 You are welcome. Thanks for comment!
Thank you Peter for a Nice video🤗
Great video plus great rig. Have one and I just love it. Only problem with mine is the antenna turner not operating so am using an external turner at this time.
+Ausbin Pippin Hi Ausbin, thanks for feed back. Yes indeed this is a great rig! 73's
Great repair, thank you peter for great video
***** Thanks Dennis!
Hi Peter, sounds like there wasnt very much wrong with the radio in the first place, frequency little bit off about all, thought the RF out power was too high, thought 100 would have been better, i have a valve amp, Heathkit sb 200 and only put 100 max into that....good video...from Fred G4Vvq in UK.
Tom Smith Hi Fred, yes you are right not much wrong but 130Hz frequency error in SSB is a lot. You can already hear 50HZ. In FM it is totally different no problems with 130 Hz out. Well 130 Watt is too much stress for the finals. I have to ask what kind of amplifier he is using. RX sensitivity is really a subjective value until you have the radio in lab.. Thanks for feed -back . 73 Peter
Good job Peter.
I have this same rig.
Grant Fullen Hi Grant, thanks for feed back. Yes it is a neat radio!
Thanks usually for your great video ! Thanks Peter. 73s de IW0HEX Pasquale.
Pasquale IW0HEX Thanks Pasquale!
Hi Peter. I have lost my adjustment tool for the special trim pots like the one on the reference adjustment. Do you have this tool and if so where can I buy one. I have looked all over the net. I find the usual alignment tools but none that allow you to adjust these tamper proof adjustments. Thanks for the video.
Very superb video. Both thumbs up! Excellent
Satellite_Guy Thank you very much my friend!
Nice work again, tnx fer sharing...
Bud...
budleyca1 Thanks Bud!
I wonder if the OM has a faulty cable or something, which is why he thought the radio was down on power as well as deaf. I'm struggling to believe that a tube amplifier would require that much drive- they typically have a power gain of at least 10dB so to give the maximum legal output here in the UK of 26dBW would only require 16 dbW (40 watts!!) drive... but you know, the customer is always right!!!
Alan Cordwell Well yes that could be a reason, I'm going to recommend him testing his set up, cables, connectors, antenna and what have we... The topic with the Amp is not clear to me, too. I don't know a linear which need 130W drive?? I have to ask him...
Hi there Peter, i have 2 Icom IC 7000's if you ever have chance to do a video on one of those it would be interesting to me, they have several problems with them at times...from Fred in england
THANK YOU..I HAVE A 570G,,,ALC IS ALL THE WAY OVER BUT ONLY PUTTING OUT ONLY 50 WATTS..ADJUSTED INTERNAL MENU,DID NOT HELP.ANY IDEAS? 73
good job i always enjoy watching your videosWhen you test from the antenna jack are you in CW or AM?
how would you compare the receive of a TS-2000 to the TS-570
Matt K Hi Matt, thanks for feed back. When I'm testing from the antenna jack it depends on the problem the radio has but in this case, as it was a frequency error, I tested in FM. In lab environment the TS-570 shows a better picture but that is not an on air test is important as well and an IP3 test should be performed.
TRXBench when i test AM and CW at 10mhz i get 10 mhz when i test FM i get 9,999,988
petter can you help need some advice ive got same radio ive got intermitting power drop on ssb modes drops to around 10 w when set on 100w fm mode always fine where do i start looking thanks paul
Had a fault with my old TS570 that you could not tune in SSB properly it took a bit of time to find it turned out to be the analog to digital jumper with bad soldering !
Sam W Hi Sam, yeah sometimes bad soldering can be really annoying...
Do these still have the good old 'Kenwood audio' tone like the TS-830 to TS-430 days?
kenwood still have a awesome audio
Could you Show How To open up the 40 mtr Transmit Past 7.100
HI. TRXBench. Thats a nice video. Do you have an idea why the CAT communication of my TS570D freezes after I send the "IF" command ? (All other commands e.G. "FA" work fine) . Thank you.
Wolfgang S. Hallo Wolfgang, mir ist dieser Fehler nicht bekannt. Falls der IF Command nicht "verstümmelt" ist, würde ich mal über die Kenwood Seite nachschauen, ob es ein firm-ware update für dein Gerät gibt. ..73
Peter, Most excellent video. I thank you, I learned so much from you. I need to acquire a good power/SWR meter for my station, any recommendations for me. George N2SQ
Thank you George glad that you like my videos. Well a good power/swr meter...it always depend on the budget but have you considered the LP100 or LP500 as you can find in my video #41 and #113..
All the best 73s
how much you charged to repair this working transceiver?
Hi Peter, is it possible for sending my Kenwood TS-570D for repair ??..any way thanks for the nice fixing stuffs.
Hi Thomas, what is the problem and where are you located?
Hello Friend. Please help me with a difficult choice. I want to buy a Kenwood transceiver and i have to choose between TS-480SAT and TS-570DG. Both are second hand. Thanks in advance. 73!
Hi Dan, I would go for the younger unit and that is the TS-480...Thanks for stopping by. 73
Needs a N3BA VCTCXO installed.
Tolles Video,
ich habe das gleiche Gerät und bin damit eigentlich zufrieden.
Allerdings vermute ich, daß es einmal überholt werden sollte. Leider habe ich nicht das passende Equipment und leider auch noch zwei linke Hände:(
Kann ich dich kontaktieren für eine mögliche Reparatur bzw. einen Check?
Mein QTH ist Frankfurt am Main (JO40FC)
Hi melde dich mal hier über die interne PM auf meinem Kanal, dann kann ich dazu was sagen 73
Ich reparier und gleiche Rohde und Schwarz ab
Hi friend how can I contact you about a repair..
Hi Branko, use fblab@gmx.de 73
oh i had one of these, kenwood ts or as i call it .. Trash of Tin shit .. jeff..
LOL that sounds vexed . Thanks for watching 73