Just not worth it imo, but y’all are first company I seen to push stage 3 on these b9a4’s, great job! I feel like I hit a brick wall with this car, I’m thinking about selling it. Too much money to be sitting around low 300whp. I’ll maybe be happy at 4. Anyways keep at it guys, gonna have a lot of buyers when you figure it out.
The B9 community is chomping for a hybrid turbo, but I am going to be honest, 317 is not a huge gain over stage 2 which is close to 300whp. These hybrids appear to need ethanol.
Our dyno reads 30hp less than a roller dyno. The TTE did really well compared to our own development A4 which is running a Hybrid IS20 from Perun Turbo. These motors definitely lack something compared to their EA888.3 cousin.
@@tune_zilla thanks for the quick reply. That’s interesting since these are a mk7 golf r longblock with an is20. Too bad you guys didn’t get the delta from stock or stage 1/2. What does a canned tune stage 2 mk7 gti typically get on your dyno? Edit: there are known torque limiters on this DSG, so I wonder if this vehicle had a TCU tune?
@@bdez1259 Hey Brock, on our website, we do have stock and Stage 1 and 2 dyno graphs which were made with the same hub dyno. So we can only assume the stock power output on this car would have been fairly similar to our own B9 A4 dev car at 218whp/246ftlb - if you watch the video you’ll see that we did get more out of this TTE turbo than we were able to get out of our Perun Turbo IS20 hybrid. The biggest hurdle, as you mentioned is what to do with the injectors as they are running pretty much at their max and outfitting upgraded injectors would probably be cost prohibitive to most people in this platform. Not that it can’t be done, just that we probably won’t go much further with this platform unless there was a huge demand. The small differences on these CYMC/CYRB engines makes them more involved to achieve bigger numbers like the Golf R or S3.
Thank you. We try to make our base maps smooth and drivable. It's not always easy with customers turbo choices, but we aim for something flat and consistent to start and then we'll work with our customers to tweak their maps and get them a tune that fits their needs. :)
Are you looking to have the same done to your own B9 A4? If so, it's best to head to our website and open a ticket. The sales/support staff can assist you from there. tickets.tunezilla.com/tickets/new
Right, I have a stage 2 Ecu and stage 1 TCU with IE and my gauges read that I’m pushing like 500 TQ and I know it’s definitely more than 317 Hp. This video has me so confused. 😂
Just not worth it imo, but y’all are first company I seen to push stage 3 on these b9a4’s, great job!
I feel like I hit a brick wall with this car, I’m thinking about selling it.
Too much money to be sitting around low 300whp. I’ll maybe be happy at 4. Anyways keep at it guys, gonna have a lot of buyers when you figure it out.
i actually really liked that "pop-file" arguably the first one ive heard that doesnt annoy me
That's great to hear. We prefer a more realistic "crackle" as well.
The B9 community is chomping for a hybrid turbo, but I am going to be honest, 317 is not a huge gain over stage 2 which is close to 300whp. These hybrids appear to need ethanol.
Our dyno reads 30hp less than a roller dyno. The TTE did really well compared to our own development A4 which is running a Hybrid IS20 from Perun Turbo. These motors definitely lack something compared to their EA888.3 cousin.
@@tune_zilla are these not ea888.3s as well?
@@tune_zilla thanks for the quick reply. That’s interesting since these are a mk7 golf r longblock with an is20.
Too bad you guys didn’t get the delta from stock or stage 1/2. What does a canned tune stage 2 mk7 gti typically get on your dyno?
Edit: there are known torque limiters on this DSG, so I wonder if this vehicle had a TCU tune?
@@-matt they are a variation, yes!
@@bdez1259 Hey Brock, on our website, we do have stock and Stage 1 and 2 dyno graphs which were made with the same hub dyno. So we can only assume the stock power output on this car would have been fairly similar to our own B9 A4 dev car at 218whp/246ftlb - if you watch the video you’ll see that we did get more out of this TTE turbo than we were able to get out of our Perun Turbo IS20 hybrid. The biggest hurdle, as you mentioned is what to do with the injectors as they are running pretty much at their max and outfitting upgraded injectors would probably be cost prohibitive to most people in this platform. Not that it can’t be done, just that we probably won’t go much further with this platform unless there was a huge demand. The small differences on these CYMC/CYRB engines makes them more involved to achieve bigger numbers like the Golf R or S3.
My b8.5 on k04 makes almost as much power on pump. Hopefully we can see the numbers go from 317 to 417 on the stage 3 b9
Eurocode Russia got the best stage 3 tune for it
Which K04 is installed? Manual or automatic transmission
@@ElRayDelRio CTS, ZF8, full bolt ons
That's a nice base map
Thank you. We try to make our base maps smooth and drivable. It's not always easy with customers turbo choices, but we aim for something flat and consistent to start and then we'll work with our customers to tweak their maps and get them a tune that fits their needs. :)
Does anyone know where Waylon purchased that front splitter/carbon fog light inner trim part??
For the dsg tune, what clamping pressure are you at to hold all all that torque? That is close to 600nm!
I don’t know if the transmission survived this tbh
what fuel pump are u using do u mind to share?
Can you do the same work on another B9 A4?
Are you looking to have the same done to your own B9 A4? If so, it's best to head to our website and open a ticket. The sales/support staff can assist you from there. tickets.tunezilla.com/tickets/new
What version of the 2.0 is this the numbers seem very low. For instance I make 314hp and 395 ftlb on a stage 1 93 tune I have the 252hp engine
Right, I have a stage 2 Ecu and stage 1 TCU with IE and my gauges read that I’m pushing like 500 TQ and I know it’s definitely more than 317 Hp. This video has me so confused. 😂
I’m also FBO
@@kgunnatatted6294damn fr
@@charlestucker6365Yes, usually when it’s real cold outside it’ll be pushing 480-505 torque but in warm weather it’s doing about 440
Nice work there. Could we assume that European spec cars with 8 injector (4 conventional and 4 fsi) would be able to pish and sustain more power?
Theoretically, yes. Unfortunately, the North American versions don't come with MPI and we don't have a solution to add MPI to the NA ECU's.
@@tune_zilla Is it not possible to use Euro Intake Manifold or drill the existing just like on the MK7 platform? CYRC euro engine had MPI
Hi I have a 2015 x3 with 2.0 diesel want to get PDF and egr delete. I'm in Vancouver BC.
Does anyone have links for the golf R fuel and vacuum pump?
Or just get an EI stage 2 93 octane that makes 343hp and 412 torque 😂
If you say so ;)
Hey I’m about to buy the DSG tune for my 2015 A4, will it cooperate with my Integrated engineering ECU tune? And will I unlock the 7k rpm limit?
Hi, is the tune on an A4 190bhp or 250bhp Quattro version?
Is there a way to code in the sport dash on the b9 A4?
OBDeleven module makes it easy, it took me a total time of 10 minutes and I have the RS gauges
Curious to see how much TTE440 has left in the tank with more fuel. Are you in the 22-23psi range with it now?
Yes. Somewhere in that range. 2800 millibar - Would be cool to see someone try the MPI from a european model.
Best way to test performance is with something like a dragy. Wonder what it will trap in the 1/4.
I literally make this on a race chip with a cold air intake and stock turbo where are these numbers from 😂
That's really impressive for a stock turbo. We use a Dynapack hub-dyno for all of our dyno testing.
You sure whp not brake? What racechip are you running for those numbers? And verified not the ones they claim on the website
@@machko1I make about 340 horsepower to the crank not sure how much I make to the wheels
race chip does not make those numbers
Where can I get the vacuum pump from and the hpfp
They are OEM, can be purchased from the dealer.
@@tune_zilla both of the vacuum pump and the hpfp are OEM? And what year specifically mk7 R
@@tune_zilla mines a 2018 Audi A4 b9
Would like to know that as well