Very helpful, you saved me lots of time, I had to remove the window to bring inside a large piece of furniture, and I could not find the way to fit it back. Just with the last-minute of the video, I managed to put it back. Thanks.
What's the best way to lift the UK04 window through the frame to check alignment? Width is greater than the height, so either the left or right side will need to go in first pointing up or down. Please can you recommend the best way to do this, im guessing 2 people are needed. Cheers
Is there a version of this but with the recessed flashing i.e. Blue instructions, or is it the same but just difference measurements i.e. 140mm from top of batton to top of bottom tiles? thanks
Adjusting the frame, then remove the window and then finally fixing the frame - this really works? The frame doesn't get out of place again when removing the window? But nevertheless: A really brilliant video series, that's how such videos should be - thank you very much!
So you have to fit the window to the tiles not where you want it the bottom flashing kit needs to be longer so you can cut a bit of if you don't needit and those crappy soft screws( No 10 toque screws) are absolutely junk soft wood frame junk not good for all the money they cost
Very helpful, you saved me lots of time, I had to remove the window to bring inside a large piece of furniture, and I could not find the way to fit it back. Just with the last-minute of the video, I managed to put it back. Thanks.
Video really helped - thanks
easy . I am buying 2 windows this week. many thanks.
What's the best way to lift the UK04 window through the frame to check alignment? Width is greater than the height, so either the left or right side will need to go in first pointing up or down. Please can you recommend the best way to do this, im guessing 2 people are needed. Cheers
Why haven't you shown how to fix the arms? Small window, try a very large fire rated Velux window!
I’m looking for exactly this too - did you find a video anywhere else/any tips?
How to proceed in case over time the alignment is lost due to roof movement and/or load like snow ?
Is there a version of this but with the recessed flashing i.e. Blue instructions, or is it the same but just difference measurements i.e. 140mm from top of batton to top of bottom tiles? thanks
Adjusting the frame, then remove the window and then finally fixing the frame - this really works? The frame doesn't get out of place again when removing the window?
But nevertheless: A really brilliant video series, that's how such videos should be - thank you very much!
You could always mark where the bracket holes are before removing the window.
Don't forget Spirit level guys !!!
thanks
doesn't look like top hung to me?
Didnt listen and watch the whole vid because it is
So you have to fit the window to the tiles not where you want it the bottom flashing kit needs to be longer so you can cut a bit of if you don't needit and those crappy soft screws( No 10 toque screws) are absolutely junk soft wood frame junk not good for all the money they cost
That’s NOT a top hung window. Ten minutes of my life wasted! Lol.