💪😎👍Thank you for posting. Atmospheric Trumpet seems like a very fancy name for a cheap airbox block off cap, and it appears the "trumpet" doesn't actually add any "sound" value, it's just something to hold the hose in place under the seat engine compartment vent holes. One could either use a zip tie, or just position the hose a couple inches short of the opening to achieve nearly the same result. For me living in the USA this product with shipping under one week costs 86$😮 Sooo for me.... I will try my almost free solution first. Also anyone doing this should check the hose for water build up in the hose periodically.
It is pretty loud. And plays pretty good. Pretty clear. You would not be disappointed unless your into audio competitions then your going to upgrade anything from oe. My microphone won't pick up how loud the system is. 80 kmhr can still hear it but you have it blasting.
You here the blow off valve perging air at idle. Sounds like a air leek type noise. Bit of a hissing noise ish. Onces into boost the valve closes until needing to relieve boost pressure. You then get the psssh noise. I have not had a issue so far with the seat melting or anything. I don't believe the air should get that hot. As you do not want boiling hot air going into the engine. You can here more of how it sounds with this video on my other channel. Subscribe to both channels for more content. More jetski related videos will be on my second channel In the future. More how toos will be on this channel I am thinking.. th-cam.com/users/shortsdHAW4A70QYs?feature=share
![PART 1: Install of the Kspeed KS3 ProRace Ultra Ride Plate on my Kawasaki Ultra 310 Jet Ski [4K]](http://i.ytimg.com/vi/Ie_k-ibo2HM/mqdefault.jpg)
💪😎👍Thank you for posting. Atmospheric Trumpet seems like a very fancy name for a cheap airbox block off cap, and it appears the "trumpet" doesn't actually add any "sound" value, it's just something to hold the hose in place under the seat engine compartment vent holes. One could either use a zip tie, or just position the hose a couple inches short of the opening to achieve nearly the same result. For me living in the USA this product with shipping under one week costs 86$😮 Sooo for me.... I will try my almost free solution first. Also anyone doing this should check the hose for water build up in the hose periodically.
Good video 👍 one question...can you make a video on the jetsound system i wanna know how loud and how well it plays
It is pretty loud. And plays pretty good. Pretty clear. You would not be disappointed unless your into audio competitions then your going to upgrade anything from oe. My microphone won't pick up how loud the system is. 80 kmhr can still hear it but you have it blasting.
just a question how does that sound when you have a seat on all the time? can seat get overheat cause of hot air
You here the blow off valve perging air at idle. Sounds like a air leek type noise. Bit of a hissing noise ish. Onces into boost the valve closes until needing to relieve boost pressure. You then get the psssh noise.
I have not had a issue so far with the seat melting or anything.
I don't believe the air should get that hot. As you do not want boiling hot air going into the engine.
You can here more of how it sounds with this video on my other channel.
Subscribe to both channels for more content.
More jetski related videos will be on my second channel In the future.
More how toos will be on this channel I am thinking..
th-cam.com/users/shortsdHAW4A70QYs?feature=share
Haha the guys I ride with threaten they won’t go out with me anymore if I buy one of these 😂😂
😆
You didn't get one in your stage 1 kit? Or you just bought individual pieces over time?