ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- Welding trailer is nowhere near complete but it is usable now at least. It may be a while before you see this project again but at least I didn't leave ya hanging on it. Thanks for watching!!
Business email: jesse@panicfabrications.com
Check out my website: panicfabrications.com/
Follow my IG: _j_moffitt... - บันเทิง
![LISA - ROCKSTAR (Official Music Video) REACTION [SHE'S BACK!]](http://i.ytimg.com/vi/QBxE30vavMQ/mqdefault.jpg)
Nice build going on. Can’t wait to see it finished. I just put a welding trailer together because I don’t have a rig truck anymore. Take care and stay safe.
Another great video. Thanks for sharing. How I always remembered colors for lights there is an “L” in yellow and an “L” in left and there is an “R” in green and an “R” in right.
Looking forward to seeing this trailer finished. I contemplated building a rack to mount a welder on so I can put it on my flatbed truck and then remove it if I needed to. Then I saw this video and now it makes more sense to me to build a trailer.
instablaster...
Yellow is left- yellow lines on pavement
Green is right- green grass ditch side
I always remember it as Yellow has an “L” for left and Green has an “R” for right.
Nice job 👍
that welder is so awesome
Good video Friend keep up the good work 👍
Good work
Good job !!! Only thing that made me a little nervous was the gas can beside the trailer when you were welding. I know we have all done it because we get caught up in the moment, but I still get a little edgy when I see it. I'm as guilty as anyone. Keep up the good work.
Nice build. You may want to reconsider the mounting location of the jack stand. If pulled by a pickup the Jack stand will be in the way of lowering the tailgate.
True
What bout those cans of flammable stuff boom
I tack stainless bolts by each light on my trailers that way I know they are grounded
very neat trailer. how thick of material will that welder do?
I have yet to test it on its limits yet, I’ll go into a more in-depth review here shortly. Should be well capable of 3/8” plate in a single pass possibly more.
Coming along nicely Jesse!!! Do you use a certain tip for the torch to make nice and clean cuts like you did for the tail lights?
For anything under say 1/4" I try to use a 000 tip and go as quick as the cut will allow to eliminate distortion on thin material
What brand is that green welding machine and where did you buy it?
Only 8 min in but, couldn't you weld a bolt to the inside of the tube behind the lights and put a nut on them for the grounds? Also as I seen mentioned I remember trailer wiring as going down the highway, the grass (green) is on your right, and the yellow lines on the road are on your left.
Yes, welding a nut inside is a good idea for the grounds
No views no likes. Damn I'm early af 😂 Wooo
So what do you think of the forney 220 mp I was considering buying one haven't heard much about them saw your video on it by the way great channel bud
I actually bought that machine because of this channel. One of the most honest reviews on it I have found. It seems to be a decent machine so far, no gripes yet. My only complaint is the supplied chart seems off for mig. Maybe it’s just my welding skills 🤷♀️
@@samchivers621 I own a welding shop and I own all Lincoln welders and always been a Lincoln man but the forney has peaked my interests
No complaints at all about the machine
@@j_moffitt ok thanks
Why did you put the axle that far back? I'm curious because I'm about to build my welding trailer.
To make backing easier
Carefull with the grinding next to your fuel cans. 😬
Kaboom
grinding and welding near a gas can with a rag stopper o_0
0_o
Could you get the tongue weight off this with the welder on it?
It was maybe 100lb
How much in total did it cost you (material wise)
So far maybe 3-400
No suspension?
Torsion axle
@@j_moffitt thanks. Also do you know where you can buy metal beams for trailer making?
It’s a registry you’re a trailer it must be a real pain in the ass it’s a lot of It’s a lot of running around and a lot of money involved just a registry your trailer I wonder how long it took you to register your trailer just a headache
So you don’t know how to measure
Thought that was obvious