Hello, the exterior diamond shaped trim piece is replaceable but it is not meant to be repetitively removed and replaced for cleaning--the backside of it has adhesive to help keep it on place. The inside chin piece is held in place by adhesive as well. You best bet is to just lay a warm wet cloth over the exterior of the vent and let it loosen up any debris then wipe it off. If there is additional stuff inside behind the mesh, then maybe a toothpick or the like could help you clean the stuff out.
hi, i would like to buy this helmet with a colored shield but i want to ask you if the shield is ok also in the night or if it overshadows too! great video anyway thanks!!!
The RST Silver shield was okay to ride with at night... but this RST Red shield is a bit too dark. I have ridden it at night... but I don't recommend it. -- Kyle & the Chap Moto Team
Hello, do you have the face shield in the up position before you try to remove the side plates? Once you raise the face shield, put the back of the helmet into your stomach and then reach from behind the side place to the front of it and use your fingers to hook into the front of it and pull the side piece away from the helmet--it takes a bit of force. Repeat on the other side.
So i would like to change my spoiler on my peacekeeper but there’s a lot of bad reviews saying it’s too see threw.like almost clear.can anybody confirm?
Awesome! Yes, the RST Green will make the Seeweed POP - I think that will look great. I wanted to try to make the Octopus Pop on my helmet. Enjoy! - Kyle
Chaparral Motorsports thanks for the reply!! if you do that make sure to upload the video! not to many channels do this kind of things (customizations of cool gear) and i believe its very important because today everybody want to double check before buying! specially when you order from other part of the globe!! grettings from argentina by the way! i hope your channel continue growing up! because your reviews are amazing.
If you are going to use a knife type of object I would strongly recommend using something such as a plastic putty knife or similar. If you use a metal blade ot could damage the finish of the helmet so of you do be very careful
Yo, you make it look so easy, it was so hard taking off that spoiler
It took a lot of pressure to pull it off for sure.... but the task itself was pretty easy. Thanks for watching! - Kyle
Took me thirty seconds thanks to this video!!!!!
Good to hear. Glad it was helpful.
Nice Icon Airflite Inky blue perfect mods!
Thanks!
Great video... The visor is so easy to change, my favourite is the Airflite Stealth ;.) Thanks for this here
No problem 👍Glad you enjoyed it. The Airflite is a pretty cool helmet.
Thank you!
You're welcome!
Thank you sir just got the blue one
Awesome. Thank you for watching.
I need to pull off the mouth vent and clean the bug guts out along with replacing that mesh screen. How do i pop that out?
Hello, the exterior diamond shaped trim piece is replaceable but it is not meant to be repetitively removed and replaced for cleaning--the backside of it has adhesive to help keep it on place. The inside chin piece is held in place by adhesive as well. You best bet is to just lay a warm wet cloth over the exterior of the vent and let it loosen up any debris then wipe it off. If there is additional stuff inside behind the mesh, then maybe a toothpick or the like could help you clean the stuff out.
Great video thanks.
My pleasure! - Kyle
hi, i would like to buy this helmet with a colored shield but i want to ask you if the shield is ok also in the night or if it overshadows too! great video anyway thanks!!!
The RST Silver shield was okay to ride with at night... but this RST Red shield is a bit too dark. I have ridden it at night... but I don't recommend it. -- Kyle & the Chap Moto Team
Pleasee can you make a video on the airfoil?
We'll see what we can do. Thanks for the suggestion.
Did you ever find a video on the airfoil?
Can you tell me how to swap out the inner visor? I cant find anything on it. thanks
M3Vader Did you find anything? I'm looking for the same information
Joseph Herrada yeah I did! You literally just pull it forward and it will pop right out, the new one will snap back in super easy! Take care
Can not get the side pieces off to switch the visors 🙄
Hello, do you have the face shield in the up position before you try to remove the side plates? Once you raise the face shield, put the back of the helmet into your stomach and then reach from behind the side place to the front of it and use your fingers to hook into the front of it and pull the side piece away from the helmet--it takes a bit of force. Repeat on the other side.
So i would like to change my spoiler on my peacekeeper but there’s a lot of bad reviews saying it’s too see threw.like almost clear.can anybody confirm?
is that red or redgold? nice video.
Hello, it's gold.
hey! tanks for the video! yesterday i just ordered the exactly same gear, do you think it will look cool with the rst green lens?
Awesome! Yes, the RST Green will make the Seeweed POP - I think that will look great. I wanted to try to make the Octopus Pop on my helmet. Enjoy! - Kyle
Chaparral Motorsports thanks for the reply!! if you do that make sure to upload the video! not to many channels do this kind of things (customizations of cool gear) and i believe its very important because today everybody want to double check before buying! specially when you order from other part of the globe!! grettings from argentina by the way! i hope your channel continue growing up! because your reviews are amazing.
How is the sun visor while wearing the glasses? TIA :)
Haven't heard of any complaints from people.
You literally start with half of the side taken off, which is half the struggle. Do better
ok
Is the spoiler only for 1 time use?
Thank you for your inquiry. The double stick tape needs to be replaced, but then it is good for another application. -- Kyle & the Chap Moto Team
Chaparral Motorsports thank you much appreciated
My spolier will not come off 😑
Try using a thin blade screw driver or a butter knife to gently lift the 3M tape off the surface of the helmet.
If you are going to use a knife type of object I would strongly recommend using something such as a plastic putty knife or similar. If you use a metal blade ot could damage the finish of the helmet so of you do be very careful