How to do wiring of magnet contactor over load and push switch
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Magnetic contactor used in high current applications. Overload relay is used for emergency trip if any fault occurs that high current flows. Here we used 23A~32A overload relay. When current exceeds 32A then, overload tripped.
There is two button; stop and reset. We can manually stop and reset the relay. Here is also test option that we can trip the relay.
3-phase input power connected in top side and motor terminal connected to bottom side.
Here pin 97 & 98 is normally open contact. 95 & 96 pin is normally closed contact. If overload tripped and we want to ON a 220VAC LED. Then 220V will be connected to pin 97. One terminal of LED is connected to pin 98. If overload tripped then 220V goes to LED and energizes.
Thanks for watching
You can also see my channel for more videos
/ @greatfunelectric7179
Please subscribe my second channel ''God Colours''
/ @godcolours2451
اسلام وعلیکم اچھی معلومات بھائی نے سب کو دی اور الیکٹرک ویڈیوز اپلوڈ کیا کرو انشا اللہ تعالیٰ کامیاب ہو جاؤ گے ❤
Zabardast❤❤❤
♥️♥️♥️
bro cotector k sath 2 posh sy control kar k vedio aploud karo motr first flour sy ur second sy chalni how to conaction
ur over loud raly k sath bi 2 posh lagany
is k sath 2 posh swich wala crikat mazil pamp lagana sath
😂
😂😂😂😂