Good on you lots of good tool at my age I won’t be starting out on any of these, but I enjoy the opportunity to see what others are doing and what’s new in the world. Thank you for sharing.
These technical woodworking videos always remind me of the car shows where two mechanics get under a car and it's as clean as the day it came out of the factory.
I left Instagram a year ago and one of the things I missed the most was your videos. Thanks to TH-cam suggestions, now I can appreciate your videos again. ❤
tools for everything yes. Does it take a "craftsman" to push the wood through the machine? No. but it does take carpentry knowledge. My compliments on the work. The end results show craftmanship.
@@ben68442 what is your point Ben? Is his end results not show craftsmanship? And yes anyone can push wood through a machine but this guy precision is dead on with all his different clips he shows which is craftsmanship that not anyone can do. Just cause you got the machine doesn’t mean you know how to use it.
This isn’t craftsmanship. This is a fancy table and cutter blade literally doing all the work so one can fab a joint ultra quickly and then present it as “hand made” when it isn’t. You could literally show a novice vocational HS level student how to install the cutter, how to set the guides and how to safely push a piece of wood through it in under 15 minutes. That is not “craftsmanship”! 😀
i too would love one but to pay for the experts help in even getting the basics right would cost more then the machine not to mention the tons of firewood i would be producing with my 1st 5000 attempts
Pretty cool. Shaper scares me like it always did. But very cool result. Wouldn’t need biscuits to make cabinets with those corners. I could see that being a lot faster.
A great joint for sure but does take time to set up properly. Do you cut the joint to make a “knife edge “ or do you leave a small flat to stop the edge breaking out? Cheers
I like how quiet your workshop appears to be, mine is so noisy. Great work
It's just the video. He's got power tools on cutting wood and you think it's actually this quiet?
😂. Mine's audible from like a km away. Especially when the four sided moulder is planning on tersa blocks😢
@@ripnlips9671 . Sorry. Just being sarcastic.😂🤣 ear defenders at the reddy!
@@Johnbro8 haha well now that you say that, I don't know how I didn't see you were sarcastic lol.
This guy looks so elated putting the 4 pieces together and it fits so snugly!
Thats a sweet cutter setup. Love how they lock together so firmly and the added glue area!
Good on you lots of good tool at my age I won’t be starting out on any of these, but I enjoy the opportunity to see what others are doing and what’s new in the world. Thank you for sharing.
That is a nice way to do a mitre.
Das ist ein Traum! Mein Großvater, Tischlermeister 1910-1976 hätte wirklich seinen Spaß daran!
I really like this new blade. Very nice
These technical woodworking videos always remind me of the car shows where two mechanics get under a car and it's as clean as the day it came out of the factory.
I left Instagram a year ago and one of the things I missed the most was your videos. Thanks to TH-cam suggestions, now I can appreciate your videos again. ❤
As a mobile welder/fabricator. I admire good craftsmanship especially from the carpenters.
There's someone in love with his tools. Every now and then he gets a new one ...
Damn really wish had a guide like that back in the day would have saved me lots of busted knuckles and bruises
This comment strangely helped me with my hearbreak 😅
❤😂clean, neat and impressive job work, beautiful and precious material .
What an Incredible Tool...and I like the Freud Lock Miter too. LOL
That is beautiful. That would work so well for subwoofers enclosures. Some glue and that part of the box would be sealed and strong as hell.
This dude is the MAN. Craftsmanship and tools for everything
tools for everything yes. Does it take a "craftsman" to push the wood through the machine? No. but it does take carpentry knowledge.
My compliments on the work.
The end results show craftmanship.
@@ben68442 what is your point Ben? Is his end results not show craftsmanship? And yes anyone can push wood through a machine but this guy precision is dead on with all his different clips he shows which is craftsmanship that not anyone can do. Just cause you got the machine doesn’t mean you know how to use it.
This isn’t craftsmanship. This is a fancy table and cutter blade literally doing all the work so one can fab a joint ultra quickly and then present it as “hand made” when it isn’t.
You could literally show a novice vocational HS level student how to install the cutter, how to set the guides and how to safely push a piece of wood through it in under 15 minutes. That is not “craftsmanship”! 😀
I really appreciate your knowledge on how all your equipment works and your carpentry knowledge....
Just 100% satisfaction
What a wonderful tool.
Congratulations.
I luv that machine and I want one bad…..
i too would love one but to pay for the experts help in even getting the basics right would cost more then the machine
not to mention the tons of firewood i would be producing with my 1st 5000 attempts
Them there Spindle machines are one of the Biggest Finger remover in a Workshop
Love how happy and satisfied he looks when its all togehter. Lowkey want to start woodworking now
I love the brilliance of these tools but I often wonder how much knowledge we lose by relying on them.
His smile says it all. So proud!!!
You have the coolest tools. That cutter is mind-blowing. It's so quiet, like the wood was butter.
I’m a simple man, I see woodworking and Freud bits and I’m in love all over again ❤
Like a damn miracle. Inspiration. Beautiful work. Thx.
Just wow ! Nice tool , nice equipment, nice job 👍
Loved the genuine smile at the end.
Oh wow, that's so cool. You do beautiful woodwork.
😮 that was so cool! The fit was ✨perfection✨
The small, yet proud grin while showing off the joinery. Man those came out CLEAN.
I really like that there is no music ruining the experience
That can’t possibly be more efficient or cost effective than an actual solid post,,,
Beautiful incredible work!
What a nice, clean spindle moulder 🤟🏽 so satisfying watching these videos
I'm investing in that bit ASAP. Looks perfect for speaker building!
Highly satisfying. Also "miter shaper cutter" is crazy
As a retire cabinet maker I'm very impressed with that sort of straight off of the spindle moulder joint idea!( UK spelling of moulder lol)
With the right tools , and knowhow everyjob Is made Easy and effortless.
Love that whole setup...
Con ése nivel de apoyo tecnológico, hasta yo sería un experto mueblista y carpintero.
The smile of a man proud of his craft.
I like how he proud of his work..❤❤
Perfect, square, seamless joints
Love your perfect work ❤️❤️
Nice end product. How about some tutorial on setting up a box cutter head? I find that procedure challenging.
Wow that is a game changer 👏 dude I want your shop lol
I LOVE this miter cutter!!!
I’m jealous, you get all the cool stuff!
Omg. A tool on youtube that actually seems to do the job!
Nothing like a man & his craft
That box is cool and that's also a quiet*ss
machine. I love it
that fit is so satisfying
Damn having nice equipment in a shop was glorious.
Dr. Freud has excellent tool side business !
Fabulous multi tool!!
That was awesome!! Thanks for sharing your video John from south jersey
Beautiful cut 😊
Remarkable workshop!
Kudos!
I’d give anything to have a big wood working shop. I’d make stuff constantly. I’d like to have Adam Savage’s workshop most of all.
Very good Joan. 👍
Pretty cool. Shaper scares me like it always did. But very cool result. Wouldn’t need biscuits to make cabinets with those corners. I could see that being a lot faster.
beautiful job, talented
Bro's entire workshop is like a lego set and im jealous
Blimey, that's nifty. Nice one matey.
Equipment is everything!!!
That’s impressive, great stuff
Now that's an awesome tool 😜👍
Very pretty!!
This sound is so good
This guys always doing cool shit
❤Wow brilliant great job❤
Thanks for being considerate by lowering the volume on the power tool clips
Quite the nice shaper there!
Sweet set up!
Oh my world! The satisfaction! 🥲
If I could go back in time and buy this for router and table saw, I might still would be doing woodworking.
Absolute perfection!
Умничка какой, все умеет 🥰😇
Excellent work
Fantastic and very nice
بسیار. عالی
Отличное Мастер
I wasn't sure how it would turn out. Now I need at least four of those finished pieces.
Very nice what a technique.
Yeah that is beautiful plus walnut
Wow beautiful joint , sure beats my rabbit joints
I greatly appreciate the attention to safety here
That was very satisfying
Spectacular .
Wood shop like this is on my lottery list, even though id probably never use it.
I love this bent saw
wow, the power of a wood shaper.
I think I'm in love ❤❤❤ 🥰🥰🥰😍😍😍
Now that is cool as hell
I LOVE it!!
That's extremely satisfying. Could you send me that piece you made so i can have it? Lol
must be nice to have all that equipment.
I wish to have this kind of workshop space too.
Fantastic, very nice
Thats a nice hoof trimmer.
Лет 9 назад работал такой фрезой. Очень хорошая штука
A great joint for sure but does take time to set up properly. Do you cut the joint to make a “knife edge “ or do you leave a small flat to stop the edge breaking out? Cheers
Maravilha de máquina. Belo trabalho
Back in the day we used to make these things called feather boards. 😉
Adam her ay youtube sayesinde makinayı yeniliyor