I’m only five minutes in and all I can say is Oh My God!!!! Dude this is one of the best youtube videos I’ve ever seen. The photography, the pacing, the sound design. You put the rest of us to shame. Thank you so much for sharing such an amazing talent🙌🏻 will be inspired by this for years to come!
I have seen every video knobs has put out on the blooper, but I have never really wanted one. What you did here changed that. Off to sell stuff to fund this little blue baby.
So I knew a lot of this, and I was totally vibing getting some great inspiration and then OMFG MIND BLOWN with the complex DAW control. Absolutely top notch all around, from information to aesthetic.
Is there a benefit to Boss FS-5U that isn't the same as one of those cheaper mini 2-switch ones? Would FS-7 dual footswitch also allow me to control the right footswitch? (Want a stop button). Thanks!! What a helpful video. I want a zoia now too...
Hi there, Lovely video :) I'm starting on MOOD and BLOOPER but I'm still figuring (trying to!) how to get to record some loops - and then manipulate them on Logic - via my midi keyboard. Probably i'm doing some basic mistake on the chain or I'm just so confused that "my chain" will never work: Novation Impulse Midi Out - iConnectivity Midi In (which is where I also connect also my iPad, for the usage of the musical apps) - iConnectivity Midi OUT - Disaster Area MidiBox In BLOOPER IN - DAW (External instrument with the input being the aggregate device - Audient + iConnectivity) I don't have a guitar neither a synthesizer so I'm trying to explore it with the Virtual Instruments on the DAW but not sure if it's possible and/or even if I'm missing an important part of the chain signal. Have you dealt with something similar on your configurations? Thank you very much for your time!
This is super inspiring! Are you using any attenuation or offset on the CV coming out of the 0-Coast? It looks like... no? Does that mean that Blooper can handle CV greater than 5v? And negative CV? Just got this pedal and I'm eager to start using it with my modular, but I'm (perhaps unreasonably) worried about frying it.
amazing video thank you! inspired me to get a zoia to use the blooper for live shows! I have had no luck so far getting zoia to connect to blooper with a standard TRS cable though… tried your advice holding down both foot switches on power up and trying one of the 16 loop switches from your patcj on the zoo but still no luck. Are you using a standard TRS or those special ring activated CBA ones?Thanks!
Where do you get one these days? Looks like CB Audio has a 4-6 week delayed time to build one. I've bought the Polyend Tracker based on Knobs video in the interim...not sure it can do all the Blooper can do. :|
Great Video! Is it possible to have Zoia synced to an external clock, for example Digitakt, and have it send Midi Clock sync Messages from DT to Bloop through Zoia?
This reply might be a bit late, but yes, that's possible, as long as the external clock signal is a midi clock signal connected to Zoia's midi in port.
Yes, I soldered one after watching this video, it has the diagram.. and it’s working for me perfectly th-cam.com/video/vQM1XgCoUxY/w-d-xo.html minute 19:50 Just got the connectors on Amazon and used an old instrument cable, works on any midi, even from DAW to Chase Bliss
Is that ZOIA patch available on PatchStorage? Because I NEED to play with it and I'm definitely too lazy to make it myself....ehh....maybe not. BUT STILL.
I had written Blooper off because of price , but this convinces me that I have been wrong!What are the cables you use here and where are they available?
Pause. Wait! Pause. Ok, oh wait! Pause. What? Rewind. Too far. Let it roll. Missed it, shit. Rewind. Pause. Unpause. Pause. Ok. Unpause- My experience watching this video feels eerily familiar for some reason.
Sure, you can use the omniports on the MC6. This is just to illustrate a general workflow for MIDI controllers that may or may not have TRS connections.
Oh awesome thanks man for getting back so soon. Love your content would love to see more in depth blooper content on how you do things the best ive seen.
This is definitely the best video made on Blooper to date.
Came here to say this. Found this one after watching a bunch of videos with many more views that didn't showcase the pedal as well as this one.
What type of cable are you using for CV? I've tried TS and TRS with multiple sources. getting it to clock to any CV source has been super erratic.
you have no business making videos of such quality, stop it, this is too good
I think it’s actually his business! These pedal videos seem to be a combination of hobby and professional skill. Just my assumption 😁
@@pgolm Would surprise me none!
The attention to detail and patience you had for creating this video is incredible. Greatly underrated
excellent coordination of sweater, socks & rugs!
blooper owner for a few months here. I didn’t even know most of these things were possible lol. enlightenment
I’m only five minutes in and all I can say is Oh My God!!!! Dude this is one of the best youtube videos I’ve ever seen. The photography, the pacing, the sound design. You put the rest of us to shame. Thank you so much for sharing such an amazing talent🙌🏻 will be inspired by this for years to come!
Damnit, I was really hoping I didn’t need this and could rely on ableton looper until watching this video
I like the way your loops have more than this usual one open chord.
I have seen every video knobs has put out on the blooper, but I have never really wanted one.
What you did here changed that. Off to sell stuff to fund this little blue baby.
Some things are worth capturing
most underrated channel in the history of youtube
So I knew a lot of this, and I was totally vibing getting some great inspiration and then OMFG MIND BLOWN with the complex DAW control. Absolutely top notch all around, from information to aesthetic.
what I want to know is when the next Fireghosting album is coming. these sounds spell good things
I love every piece of music you made in this video. Simply awesome!
Your videos are just amazingly beautiful in every way possible! I thought I was already over the idea of getting a blooper and now I want one again!
As if I didn't want a 0-coast enough already... This video is absolutely gorgeous!
No words. Just love!
the best explanation of ramping yet!
Another Genius offering.
Best Blooper vid ever, thanks!!!
Oh hell yes. I’ve missed not having new stuff from you.
Wow, this video is so pleasing in every way. It filled in many holes in my understanding of Blooper.
Great video, beautiful and very useful. Thanks!
This is fantastic! Keep it up! 🤙
My good lord this is most heartwarming gear video i have ever seen❤️
one of the best made videos ever.
well that was fun and very informative, thank you!
What a wonderful video.. amazing job
this was just the video i needed, many thanks
I didn't think I wanted a Blooper before I saw this video... but now....
This was amazing, thank you!
Wonderful video.
nice video makes me want a blooper even more
Amazing video ❤
what an amazing video!
aswesome video - you are a wizard!
Okay the melody at 4:02 is incredibly familiar, anyone?
Edit: Just remembered! It's "in my dream we're two flowers" by Deadstar
incredible incredible incredible incredible incredible incredible incredible incredible incredible incredible incredible incredible
this was highly inspiring to me thanks for making it! I'm excited to bloop in new, uncharted-by-me ways.
Totaly agree with the comment below, wow, such a good and helpfull video !
Don't even have a Blooper, but really enjoyed it!
Amazing vid
Just a great a video thank you, I cried twice before it ended 😂👌😊
SO NICE VIDEO!!!!!
im so inspered yay
This is awesome. I would love it if you did one of these for the Warped Vinyl II.
you’re like KNOBs’ brother haha
awesome video, ended up here again hahaha. only thing I miss in it is blooper delay mode!
Great video! Thanks! .... and now be my personal MIDI teacher, please :)
Yes to business success! haha
Teach me master. 🥋
Is there a benefit to Boss FS-5U that isn't the same as one of those cheaper mini 2-switch ones? Would FS-7 dual footswitch also allow me to control the right footswitch? (Want a stop button). Thanks!! What a helpful video. I want a zoia now too...
Ooooooh, I'm going to have to create a patch like that for my ZOIA! unless you already have one on patchstorage? Either way, so cool!
absolutely killing me with those fonts
its so great. i ordered one a long time ago but the virus has delayed it for so so long
Hi there, Lovely video :)
I'm starting on MOOD and BLOOPER but I'm still figuring (trying to!) how to get to record some loops - and then manipulate them on Logic - via my midi keyboard.
Probably i'm doing some basic mistake on the chain or I'm just so confused that "my chain" will never work:
Novation Impulse Midi Out - iConnectivity Midi In (which is where I also connect also my iPad, for the usage of the musical apps) -
iConnectivity Midi OUT - Disaster Area MidiBox In
BLOOPER IN - DAW (External instrument with the input being the aggregate device - Audient + iConnectivity)
I don't have a guitar neither a synthesizer so I'm trying to explore it with the Virtual Instruments on the DAW but not sure if it's possible and/or even if I'm missing an important part of the chain signal.
Have you dealt with something similar on your configurations?
Thank you very much for your time!
Perhaps you could find a way to send an audio input into Blooper from your iPad and then use the DAW/keyboard to control MIDI?
This is super inspiring! Are you using any attenuation or offset on the CV coming out of the 0-Coast? It looks like... no? Does that mean that Blooper can handle CV greater than 5v? And negative CV? Just got this pedal and I'm eager to start using it with my modular, but I'm (perhaps unreasonably) worried about frying it.
Your Bloops are awesome! Could you show how you make these samples from scratch? Would be awesome!
amazing video thank you! inspired me to get a zoia to use the blooper for live shows! I have had no luck so far getting zoia to connect to blooper with a standard TRS cable though… tried your advice holding down both foot switches on power up and trying one of the 16 loop switches from your patcj on the zoo but still no luck. Are you using a standard TRS or those special ring activated CBA ones?Thanks!
Just a standard TRS cable! Hope it works out
Can you control the BPM with the OP1 or any other method as you did with the CV unit?
Where do you get one these days? Looks like CB Audio has a 4-6 week delayed time to build one. I've bought the Polyend Tracker based on Knobs video in the interim...not sure it can do all the Blooper can do. :|
Great Video! Is it possible to have Zoia synced to an external clock, for example Digitakt, and have it send Midi Clock sync Messages from DT to Bloop through Zoia?
This reply might be a bit late, but yes, that's possible, as long as the external clock signal is a midi clock signal connected to Zoia's midi in port.
Thank you for always making such beautiful content. How’s the 0 Coast been treating you?
Thanks! Borrowed one to make this video, but I was very inspired for a month and returned it rather reluctantly.
woaaaaaa love this video! learned so much here! now i'm gonna need a ZOIA too haha. PS: what kind of guitar fender model are you playing?
i guess a fender ultra tele ;)?
woah.
ok , want this
oh wow i didnt realize this was fireghost for a second
🌸🔥🌸
Whenever I see a Zoia doing its thing, my blood flow is uh... redirected.
all these tracks are so great but someone please tell me where i can listen to 14:00
Still working on it but hopefully soon!
for the CV control, is that a 3.5mm TS to a 1/4" TRS cable? Does it need to be TRS on the Blooper end? thanks
Yes, TRS on the Blooper end.
Please tell me 14:00 is new Stuck in November!
Incredible. Curious minds want to know... what camera are you shooting with? The colors are out of control.
You’re out of control. (Sony A7sii - shot super flat and then coloured in to taste)
Wow! Remarkable. What is the cable you are using for CV into blooper?
It’s a CV cable you can find on the Chase Bliss website
This video is great! Is that zoia patch available anywhere?
it's in patchstorage! :)
What's the best CV device for a beginner?
Joel is our dad
Can you use the blooper with the MC8 directly without the midi box?
Edit: Yes you can, and it’s glorious
Yes, I soldered one after watching this video, it has the diagram.. and it’s working for me perfectly th-cam.com/video/vQM1XgCoUxY/w-d-xo.html minute 19:50
Just got the connectors on Amazon and used an old instrument cable, works on any midi, even from DAW to Chase Bliss
where can i get that cable that you use for CV?
really really odd question, but what typeface are you using for the captions in this video?
Is that ZOIA patch available on PatchStorage? Because I NEED to play with it and I'm definitely too lazy to make it myself....ehh....maybe not. BUT STILL.
ZOIA patch added to the description. Enjoy!
@@fireghosting yay! Thanks so much! 😁
Can the Blooper be synced to an OP-1? 😳
Can I listen to your music somewhere?
I'm the five hundred, fifty-fifth like. & I likey lots & lots!!
I had written Blooper off because of price , but this convinces me that I have been wrong!What are the cables you use here and where are they available?
The specific CV ones are available on the Chase Bliss website and the MIDI ones are just regular TRS cables.
@@fireghosting you can send midi over TRS?
@@bobschrei2029 Yup, with a midibox
@@fireghosting thank you!
I hope Knobs finds this
He’s the one who commissioned this video
What happens if you do bounce wiggle and random?
Wiggle
how do you delete sounds you want to get out of the saved memory?
Overwrite it with a new loop select the loop you want to save to and save it there
i need to know where can i listen to your music
Deadstar/Fireghost/Stuck in November on Bandcamp.
would you be open to sharing the mc3 patch??
mc6**
2:46
Pause. Wait! Pause. Ok, oh wait! Pause. What? Rewind. Too far. Let it roll. Missed it, shit. Rewind. Pause. Unpause. Pause. Ok. Unpause-
My experience watching this video feels eerily familiar for some reason.
you could have made a whole album with these sound but you decided to make them just for a video wtf
Im overstimulated...
Hey man i know this content is old but anyway you could explain to me why you need a midi box if you already have an mc6 and trs omniports?
Sure, you can use the omniports on the MC6. This is just to illustrate a general workflow for MIDI controllers that may or may not have TRS connections.
Oh awesome thanks man for getting back so soon. Love your content would love to see more in depth blooper content on how you do things the best ive seen.