HOW Flux Transforms Your Solder Braid / Soldering Tutorial
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2023
- How Flux transforms your solder braid is a great soldering tip if you never knew it .
Struggling with your wick ? Add flux , no more struggles.
If you enjoyed this TH-cam short please consider visiting my TH-cam channel for many more soldering videos with great hints , tips and demos throughout.
Thank you for your time , good luck 👍
#soldering #youtubeshort #desoldering - วิทยาศาสตร์และเทคโนโลยี
Flux is the wonder chemical in all sorts of soldering operations. It's amusing how many people try to work on circuit boards without using it. It makes installing and removing components much better and tends to prevent doing damage to pads and traces on a board. One of the keys in doing these operations is to keep the time you have to apply heat to a minimum. Without using enough flux that becomes impossible.
Hi , thank you for your comment , much appreciated. You are right , flux is definitely the king 👑 .
I do it because I don't want to clean my circuits with soap and water you sob 😂
Bu ürünün adı ne
@@mrsolderfix3996that one in the movie is rosin? That one like amber rock but when heated changes to fluid?
I mean for soldering (not desoldering) I never needed much more than fluxcore solder.
I feel like a complete idiot full well knowing what flux does, having both flux pens and syringes, but it never occurring to me it could be used for both *application* and *removal* of flux.
This will hopefully be the single most useful TH-cam video for electronics in 2024!
Thanks! ❤️
I agree😂
Hi , thank you for watching the video and commenting , much appreciated 👍
Wow, I never got why my wicks did not wick while for some it did. Thank you so much
Yep, it's one of the three wick desoldering tricks. The first is to reflow the joints with fresh solder (old oxidized solder does not take heat well). The second is to preheat the joint (the first step usually takes care of this for small joints, but for larger components like metal shielded connectors a hot air station or board preheater may be necessary), this decreases the time it takes for the wick to heat up and the flux to activate. The last is this one: add fresh flux to your wick -- the fresh flux seems to activate faster which speeds the cleaning of any oxidation off of the copper wick (this is what flux is used for, as solder will not flow onto oxidized surfaces). You can see the flux in action in this video. In the attempts without the extra flux, you don't see the flux liquify (or it does so very slowly, or only close to the iron tip). After adding the extra flux, you see the flux quickly change color all along the wick giving the solder somewhere to go (remember, solder will not flow to oxidized or too cold surfaces).
@@davidcameron648 Indeed reflowing joints with flux works wonders for clogged tru-hole pads.
Hi , thank you for watching the video and commenting , much appreciated 👍
@@mrsolderfix3996good for sharing this video. Where can I get this Flux. If on Aliexpress just tell name of Flux. Thanks in advance.
Never enough flux 😊
for those who don't get it, he's dipping the wick in liquid flux. if all you have is solder core lead/tin solder on hand, you can also add a huge amount of new lead/tin to a joint and then wick that up quickly and flux core juice will get on the wick and do the same thing. dipping it in liquid flux is WAY easier though
whats a good liquid solder flux to buy?
If you don't have a big open container of liquid flux to dip it in, you can also just apply some flux to the board area first (using a flux pen, dropper, etc), and then put the braid down on top of the solder/flux.
I've been soldering for over 20 years, and never once did it occur to me to flux my wick. Now I feel like an idiot.
Hi , thank you for watching the video and commenting , very kind of you . Even though wick comes pre fluxed it still struggles at times . Add flux and it's amazing . Hopefully the video can help a few people learn this simple tip . Thanks again , take care 👍
What I normally do is use a q tip to add an appropriate amount of flux to whatever solder I'm removing first, then press the wick and iron on top
Hi , thank you for watching the video and commenting , very much appreciated 👍
People are always amazed by this. You can even do it (although less successfully) with cheap flux
Hi , thank you for watching the video and commenting , very much appreciated 👍
Genuine game changer for me. I'm always struggling with my wick. Can't wait to try this out.
Hi , thank you for watching the video and commenting , much appreciated . Hopefully you get on ok trying this out . It really is amazing , trust me . Thanks again 👍
Chemtronics makes pre-fluxed desoldering braids. They work great 👍
Hi , I always use Chemtronics or Multicore desoldering braid that is pre fluxed but adding a light layer of rework flux to it takes it to a different level . I know many people in the Electronics industry who use these pre fluxed braids who now add extra flux to them . One of the best tips I've picked up. Thank you for your comment 👍
I was going to make this comment about the fluxed braids - I use Chem-Wik which I’ve found to be brilliant but will try some extra flux on it next time!
I'm broke af, so i prefer cheap ones, just adding small drop of flux that i have, and it works like a charm
I've gotten decent with braid without flux but dear Lord this is going to make my life so much easier. desoldering a through whole audio transformer was a nightmare
i both love and hate it...i thought i was the failure and stopped using de solder things ,,,im buying some braid now to try this...thank you
Hi , thank you for watching the video and commenting , much appreciated . This is an amazing help when desoldering, believe me . One of the best things that's ever helped me . Thanks again , take care 👍
KeReN 👍👍 BaGuS 👍👍
Hi , thank you for watching the video and commenting , much appreciated 👍
First time you read the instructions.
👍👍👍You made a video instructions 👍👍👍 for people who throw the paper without reading the instructions 😄
Hi , thank you for your comment , very much appreciated 👍
kmaal bro
Hi , thank you for watching the video and commenting , your time is very much appreciated 👍
It's a crazy trick. It works very well. Thanks
Hi , thank you for watching the video and commenting , very much appreciated 👍
You don't know how thankful iam for this , i am 28yo broke working on my Sony gr66 and wasn't able to wick
Hi , thank you for watching the video and commenting , very much appreciated 👍
Some quality solder braids used to be pre-fluxed, i've not seen those for a long time tho, I use a liquid no-clean flux
The last one i bought was pre-fluxed. I think it's from MG Chemicals
MG Chemicals or Chemtronics
Hi , thank you for your comment. I mainly use Chemtronics or Multicore braids but even the pre fluxed ones benefit massively by adding a small amount of external flux . Thanks again , take care 👍
Hello sir. Thanks and keep motivating others like this
Hi , thank you for your comment, much appreciated 👍
Thank you. This is GREAT!!!👌
Hi , thank you for watching the video and commenting , very much appreciated 👍
Hi bro I am starter in soldring i will get much motivated when I am watching ur videos... Thanks for this good tips bro... Pls go ahead and gave lot of ideas like this...
Hi , thank you for supporting my channel , very much appreciated
I'm glad you enjoy the videos and they are helping you , great to hear . Thanks again , take care 👍
Thanks for tip. Spending the morning desoldering old pcbs :)
Hi , thank you for your time . I hope your desoldering goes ok , I just used to like trying out made up methods on scrap boards to see what I could come up with . Thanks again for your time , take care 👍
Going to try this thank u am just learning
Hi , thank you for watching the video and commenting , much appreciated . It really works , hopefully this method along with my other soldering videos can help you along with your soldering / desoldering issues . Thanks again , take care 👍
Fantastic tip. Thamks for it.❤
Hi , thank you for watching the video and commenting , very much appreciated 👍
Wow thank you so much ❤
Hi , thank you for watching the video and commenting , very much appreciated 👍
I didn't think of that, I'll try.
Hi , thank you for watching the video and commenting , much appreciated . This really works well , trust me 👍
THANK YOU, THIS IS AN AMAZING TRICK!!
Hi , thank you for watching the video and commenting , very much appreciated 👍
Hi! What brand of flux and wick do you use? I have been using alpha flux with great results but yours looks better
I like to spread the copper weave apart sometimes that helps
Hi , thank you for your comment . You make a good point , sometimes loosening up the braid weave can significantly help with wicking of the solder . Thank you for your useful thought , take care 👍
Amazing
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Great tip!
Hi , thank you for watching the video and commenting , very much appreciated 👍
One of the first actual useful and most importantly very sensible techniques I've seen in a shorts vid.
I'm working in an electronics laboratory and wouldn't like to miss this doing solder work 🔥
Hi , thank you for watching the video and commenting , very much appreciated 👍
This guy's solder bridges are neater than my actual welds, god damn.
Hi , thank you for watching the video and commenting , very much appreciated 👍
Really helpful! Thanks a lot!
Hi , thank you for watching the video and commenting , much appreciated 👍
Which Chemical did you put Wick In?
Good work 😊
Hi , thank you for watching the video and commenting , much appreciated 👍
Superb ❤️👌🏻
Hi , thank you for watching the video and commenting , much appreciated 👍
Wow that's awesome ❤
Hi , thank you for watching the video and commenting , much appreciated 👍
Mate I don't watch shorts but recognized your style and had to drop by. Great lil' clip of your awesome trick :) I see ur channel's steadily growing. Keep at it, 100k's right around the corner.
Hi , thank you for supporting my channel , very much appreciated. I will keep posting when I can as long as people seem to like the videos . Thanks again , take care 👍
Best oidia of desoldring
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
I came to learn how to soldier, but this song this is great!!
Hi , thank you for watching the video and commenting , much appreciated 👍
Nice video!! 😂 I love sticklers :)
Hi , thank you for your comment , much appreciated 👍
thx very thanks this was helping me alote
Hi , thank you for watching the video and commenting , very much appreciated 👍
Really nice bro 😮
Hi , thank you for watching the video and commenting , very much appreciated 👍
Excellent!!
Hi , thank you for watching the video and commenting , much appreciated . Remember FLUX is king 🫅👍
Nice de soldering trick 👌👌
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
flox name please?
Nice work
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
❤wow ❤ that's good❤ thanks❤
Hi , thank you for watching the video and commenting , much appreciated 👍
Bro that's super useful 😮
Hi , thank you for watching the video. Your support is very much appreciated . This really works well , hopefully it can help a few other people out. Thanks again , take care 👍
thank you for the info
Hi , thank you for watching the video and commenting , very much appreciated 👍
Hi, you are a real magician!
Whenever I hear the Arthur C. Clarke quote --“Any sufficiently advanced technology is indistinguishable from magic”, I like to add --"Any sufficiently skilled person is indistinguishable from a magician".
Hi , thank you for watching the video and commenting , much appreciated 👍
great video, thx a lot ;-)
Hi , thank you for watching the video and commenting , very much appreciated 👍
Excelente consejo👏👏👏👏
Hi , thank you for supporting my channel , much appreciated 👍
Beautiful
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
very helpful.
Hi , thank you for watching the video and commenting , very much appreciated 👍
That was funny. Nice.
Hi , thank you for watching the video and commenting , much appreciated 👍
Man, that solder tip is hot as hell!! Can you Review the soldering iron?
lovely.
Hi , thank you for watching the video and commenting , very much appreciated 👍
Wow, Im subscribed!!!!!!!!
Hi , thank you for supporting my channel and subscribing , very much appreciated 👍
You're welcome.
waw mantap nih ilmu bermanfaat
Hi , thank you for watching the video and commenting , very much appreciated 👍
Good to know this 😮
Great, now I know why it never worked when I needed...
Hi , thank you for watching the video and commenting , hopefully the video can help a few people out 👍
Amazing. Here i thought it was because i had a cheap brand solder wick 😂😂 can't wait to try this! What kind of flux do you use?
Remember the 1st time I used solder braid. 😊😊😊
Hi , I think we all do . Thanks for watching 👍
I was just thinking about why my wick doesn't work like in vidoes, Wow youtube really reads your mind. 😮
U can also fold and unfold it a few times so it will get a bit bigger and work like a charm
nice work, what flux are you using?
Amazing. Can you recommend some flux? I have never used the stuff before.
very good :D
Hi , thank you for watching the video and commenting , much appreciated 👍
Gracias por el truco 👍
Hi , thank you for watching the video and commenting , very much appreciated 👍
Hello bro, I have a question. Is the wire dipping into the solder paste?
No way. I need to try this.
Hi , thank you for your comment , much appreciated. This works great , I hope you try it and are nicely surprised . Thanks again , take care 👍
Wowww now I know
Hi , thank you for watching the video and commenting , very much appreciated 👍
What kind of flux do you have that is fluid at room temperature? Need me some of that
Super sir
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Suuupppeeerrr😊😊.
Hi , thank you for your support of my channel , very much appreciated 👍
Wow 😮
Hi , thank you for your comment , very kind of you 👍
Thank you
Hi , thank you for watching the video and commenting , much appreciated 👍
Wow😮
Hi , thank you for watching the video and commenting , much appreciated 👍
Hey dear, how is your solder tip so clear?
Our solder tip is dusty every time..
So, I need to clear every time before use.
So please tell me any solution or make a video on it.
I see that you're using some type of liquid flux. Can you share what you use and where you get it?
You can just heat up some solid flux using heat gun to make it liquid
@@groundcontrol6876 Thank you for your suggestion. I'll give it a try.
@@terrylong472 No prob, have fun! :)
Perfect
Hi , thank you for watching the video and commenting , much appreciated 👍
Really great method, and very well demonstrated. However if you use good quality wick like for example Soder-wick by Chemtronics, then the braid will already be saturated with flux and with its strong capillary action it will suck the solder off like a pump without having to ever flux the wick.
Hi , thank you for your comment , much appreciated. I use 2 brands of braid , Chemtronics and Multicore . Like you say they come pre loaded with an amount of flux . But adding extra flux turns them from good to amazing . At times braid doesn't aways perform as it should . This is how to solve that problem . Thanks again , take care 👍
wooooooooooooooow!!!!👍👍👍👍
Hi , thank you for watching the video and commenting , much appreciated 👍
which microscope you using bro and what combination please telll very impressd
I have always added flux
Super bro
Hi , thank you for watching the video and commenting , very much appreciated 👍
bruh. just started as a tech and def gonna be using the "super braid" lol
Hi , thank you for watching the video and commenting , much appreciated 👍
I like your camera. What do you use?
Thanks for sharing 🎉🎉🎉🎉
Pest ki brand ur name kyaa hey
Hi , thank you for watching the video , much appreciated 👍
do you have some recommendations of flux brand?
Where do you get liquid flux?
Amazon...
I always fray the ends of the solder wick. Helps it capture more solder and makes me spend less. Don't skimp on flux! Seriously it should be everywhere you heat up
Hello. What kind of flux are you using? The only kind that I can find is either a solid or a paste? Would love to find this type. Thx
Nice
Hi , thank you for your comment , very kind of you 👍
what is the name of that flux?
Tnx bro
Hi , thank you for watching the video and commenting , very much appreciated 👍
When I started solder, no one, no teacher told me this, but one day it occurred to me to do it, but I did it secretly, thinking that it was not the right thing to do, and I would look like an idiot... Then I realized that this way it had to be. xd 😂😂
Hi , thank you for watching the video and commenting , very much appreciated . I'm glad you did this , great thinking 👍
what kind of flux is this? and which brand?
which liquid name pls ???
Excelente
Where was this video last night at 3AM when I was making a mess of my board??