won't work as the inner part isn't adjustable to the materials thickness. the angles differ dependent of the clearance. that's why the whole project suffers usefulness
no it is a waste of time. with the pin at a fixed distance you limited to sloppy bends. There is a reason why all benders have different sized dies or the bending peg is movable in distance from the pivot pins
Excellent. I don't understand why those 5.6k people disliked this. I mean, excellent idea, wonderful presentation, no bullshit dialogues. Still this much dislikes? What else do these people want?
Personally I don't usually wear gloves either, but I learned my lesson about welding with a gold ring on! Had a piece of hot slag stick on there and instantly burn my finger! If you're not going to wear gloves at least take that ring off!!
This is brilliant! I am going to make a few with different sizes for steel reinforcing rods that I need to bend. Kind regards and greetings from Africa.
Еще неплохо бы пластины- вкладыши добавить. На радиус и остроту гиба влияют так же люфт самого прутка/трубы в упорах. А еще меня только что осенило, что можно сделать круглую вставку внутри (из обоймы другого подшипника, например). И будет возможность гнуть круглые, кольцевые детали!!!!🤔 Теперь главное подшипник с вагонного депо сп****ить😀
That ball brg looks like something from an industrial free turbine. Nice to find those things scrap, cause I know how much they cost new. Very inventive. Good job. Thanks for posting.
Its common in industrial repair to throw away good bearing that have age on them . If you work with a shop like that bearings are available for less than scrap normally.
Great idea Brother!!!👍🤔 I’m a welder so, I make all kinda stuff! Never thought of this! I always used a vise and a torch! This will make life much easier! Thanks again!🇺🇸
How I Built a War Hammer - Look What I Did To Him
th-cam.com/video/gNDZVgGDNOY/w-d-xo.html
I guess Im kinda off topic but do anybody know of a good site to watch newly released tv shows online?
@Emilio Lucca lately I have been using Flixzone. Just google for it =)
@Caspian Caspian yup, I have been watching on FlixZone for since april myself :)
@Caspian Caspian thanks, I went there and it seems to work :) I really appreciate it!!
@Emilio Lucca glad I could help =)
Now add some degree markings and you're good to go.
won't work as the inner part isn't adjustable to the materials thickness. the angles differ dependent of the clearance. that's why the whole project suffers usefulness
2nd that...
@@alphonsbretagne8468 yeah need to make the the part that holds the metal adjustable
Not a waste of time!
Useful tool
no it is a waste of time. with the pin at a fixed distance you limited to sloppy bends. There is a reason why all benders have different sized dies or the bending peg is movable in distance from the pivot pins
@@waynerainey2606 he could just put in a metal shim between the piece of metal to be bent and the two sides.....problem solved
Very very nice
Thank you now i am trying to find an excuse to bend metal
lol
Dam right, me too.
just create some damn metal figures for your garden ... and your wife will thank you lol
hahahahahahahahahahahahahahahahaha
Thats easy. They have been bending metal ever since Black Sabbath.
Brilliant videos ! 👍🏻
ScrewsNutsAndBolts thank you 😊
@@DIYFixMan You're welcome !
Wow super idea
Excellent. I don't understand why those 5.6k people disliked this.
I mean, excellent idea, wonderful presentation, no bullshit dialogues. Still this much dislikes? What else do these people want?
Thank you very much bro, I love your support
❤️❤️❤️
For the absence of gloves probably
Those who want this product to be delivered to there home free of cost disliked it 😂😂
This is Bender grand-grand-grand-grand-grand-grand-grandpa. From Futurama!
Metal fabricator 20 years. This is genius.
GOOD JOBS
thank you
People like you deserve a promotion in their jobs
Thank you 🤗
Dude's wearing a smart watch and welding bare handed
Mohamed Aadil Did you see how he was using that cut off wheel . hands on the guard one slip goodbye finger
I'd laugh but I've done worse haha
Thats how u know hes got a 1 footer
Meh ive welded bare handed.. also flapdisked my finger once... and burned my arm pretty badly on a hot qork piece:/
This is the one smart comment... Millions of visualizations of a very bad example
That’s it… I’m making one of these!!👍🏻
крутяк. пойду тоже сделаю. незнай зачем но сделаю. пусть валяется, может пригодиться.😊
А ещё лучше все подшипники дома привари свавкой! Отличная идея!
А что это?
А зачем это?
ПригодиТСЯ
Это приспособления для гнуться рамок на армопояса, как вариант.
Fantastic
Awesome. You are great!
Thank you 🤗
Thinking outside the box is always welcome. Thank you for the idea. Now only if I could do 1 inch square tubing with 1/8 wall this way.
Hello mr, it's a very good job and a good idee... 😉
❤️❤️❤️❤️
Need airhose too cool bearing
@@DIYFixMan hhji
Welding the tempered steel is not a good idea!
I don't understand, i am a french man, i speak a litle...
Great job , very handy tool to have in garage.
Title: How to Make a Powerful *METAL BENDER*
Toph: Allow me to introduce myself
I just love people with talent. Good job man.
Thank you 🤗
Great idea
А вы молодцы. Просто и полезно. Лайк и подписка!
Спасибо большое братан❤️❤️❤️🙏🏼🙏🏼🙏🏼
DIYFixMan что за подшипник?
That's amazing and easy to make and work perfectly thanx for sharing
Great one, I know many people do this, but can we appreciate his big balls of using the grinder/cutter bare-handed
A Mast
Gloves? We don't need no stinkin' gloves!
Where we're goin we don't need gloves 😂 THANKS
I love the smell of gloves in the morning
@@WeBuildStuff as long as they don't stink!
Continue with movie quotes with gloves added!
@@WeBuildStuff please take care of Herbie? says Linsy Lohan ,,,,,,whaaaaa, oh HERBY THE LUV bug ,,,I. Think,? O well L L stinks 😂
Very cool! -- You could edge de angle measurements on it and it'll give you accurate bends.
And you could be my friend 😔😔
Great idea! I've made a bender similar to this but with removable tools... But I didn't think about the measures
Very cool. Can I send you some gloves. 🤪
Personally I don't usually wear gloves either, but I learned my lesson about welding with a gold ring on! Had a piece of hot slag stick on there and instantly burn my finger! If you're not going to wear gloves at least take that ring off!!
Garland Terry - Lol
Good way to get a quick winter tan...
Sharing knowledge free is one of the best quality of mankind. God bless.
Thanks 🤗
CONGRATULATIONS, FUNCTIONAL AND VERY GOOD
Thank you for watching the video
This is brilliant! I am going to make a few with different sizes for steel reinforcing rods that I need to bend. Kind regards and greetings from Africa.
Amazing project!!! @
DIY FixMan
Pretty nice
Thank you
So coool
Finally found a bearing and built one. Handy and works well when needed. Great Idea.
Fácil y bonito ,por lo demás muy práctica , bendiciones amigo
thanks buddy
that is genious work! very well imagined and materialized.
Love watchin INTELLIGENT people in their natural habitat ! Thanks !
wonderful metalbender .Excellent 🌷🌹
Thanks
Magnificent !!!! Thanks for sharing.
thank you ❤️
Awesome tool and craftsmanship. 😊
Thank you for sharing.
Thank you 🤗
@@DIYFixMan
😊
Классная штука надо сделать полюбому пригодится👍
87gjjkixitidodkcuuroeoc
Yes
Class👍
@@moderatorSevenHeaven Головой ударился? Патент на металлолом?
Только Перчатки одевай, руки тоже могут в дальнейшем пригодится :))
*Now that's creativity right there.*
❤️
Rffyyt gf ko
The easiest way I ever seen. One million thanks .
Thank you for spending your time to show this!
Thank you 🤗
Good job
Only one word " genious " totaly genious👏👏👏👏👌👌👌
Yan Pelletier mairci
This tool is such a simple concept...but SO AWESOME that I want to make one!
❤️
Your idea is great
Thanks bro
Молодец мужик!
Всё просто, и без всяких заморочек!
Большое спасибо, друг! Я рада, что ты посмотрел мое видео
@@DIYFixMan 🤚👍🤝
Круче не придумать:) SUPER:)
Я себе такую-же сделаю!!!
Спасибо большое, дорогой друг
great bender ....have a scrap sowing machine wit de same bearings....gonna make me one !!!!!!!
Закрытую сторону подшипника сверху надо было отсавить
out of all the DIYs I have seen on You tube . This has to be the BEST one ever.
SIMPLE TO BUILD.
NOT COMPLICATED.
GOOD JOB.
Wow!!! Thank you Mr FixMan, that made my life easier was looking for something like that .Great idea once again thanks for sharing your ideas.
Today i learned something in my life. Thank you
🥰
Very awesome.... you are a genius !
Simply wonderful
Absolutely fantastically super cool 👍😎👌.
Paul ✌️
Fantastic work...I need to build one this.. thanks...buen trabajo.. gracias...
Thank you! Daniel Ramirez Cruz.
I think this fellow could weld the crack-of-dawn together. Good idea really.
DIY FIXMAN thanks so much to sharing your great idea, I appreciate it!
I'd love to know, thank you friend Mario Alvarado
Wow , what an job finding,nice , very nice
Thank you very much sir
Great idea for the home mechanic 👍
Gteat idea and looks like a easy/quick build. No need for gloves for this man. He's obviously a skilled welder and craftsman.
Also anyone that clicked dislike is just jealous because they're too scared to weld bare handed. Or they don't know how to at all.
Very neat and smart!
Good Idea,
Thats actually really good
Good idea brotha. Totally gonna steal it for work.
Thank you 🤗
I just made one, is exelent, simple and usefull. Thanks.
good luck bro
This is the best I see
❤️❤️❤️❤️❤️❤️
Thats dope af! I wish I had one! Those tractor bearings are expensive
You can old ball-bearings for nothing at scrapyard!
@@natteft6593 in California?
Fantastic idea friends
Great just what i needed a metal bender
Thank you 🤗
На гибочный пруток можно надевать втулки разного внешнего диаметра, увеличивая остроту загиба для разных по толщине прутков или пластин.
Еще неплохо бы пластины- вкладыши добавить. На радиус и остроту гиба влияют так же люфт самого прутка/трубы в упорах.
А еще меня только что осенило, что можно сделать круглую вставку внутри (из обоймы другого подшипника, например). И будет возможность гнуть круглые, кольцевые детали!!!!🤔
Теперь главное подшипник с вагонного депо сп****ить😀
Хороший и полезный ап грейд)))!Удачи!
@@ginger_ua4521 как спи. дишь, видео выложи самлжелки.
@@ginger_ua4521
Ni679k7jb bggb
Jļi
Ojihhvg,
Man, that's a Great job. Very impressed with that one. Almost anyone could use one of those
Nice idia sir
That ball brg looks like something from an industrial free turbine. Nice to find those things scrap, cause I know how much they cost new. Very inventive. Good job. Thanks for posting.
❤️
no gloves no insulator on rod holder. I love this tool you have made and you my friend are the real deal too.
Excellent idea dude ! Gonna make one just need a sod off old bearing lol .greetings from Wales UK 👍
Muito boa mesma
Ship bearing ?
Yeah, any ideas where i can get a bearing like that already..? Or what that came from?
Oil field equipment or bearing supply store will have tons of old ones for cheap even
didnt know what a metal bender was until today
❤️❤️❤️❤️❤️
Great idea!💪🏼👌🏼
That is ingenious! Great idea. Thanks for sharing.
Thanks for watching my video, I'm glad you liked it
The best bending tool I've ever seen
👍🏼👍🏼👍🏼👍🏼👍🏼
First, get yourself a 300 dollar ball bearing. Lol!
Its common in industrial repair to throw away good bearing that have age on them . If you work with a shop like that bearings are available for less than scrap normally.
@@lanceexcavating4165 looks like something out of a final drive.
I love a slight age to my bearings
And then introduce a weak point in that bearing by welding to it.
I do work in a pretty big shop.
Great idea Brother!!!👍🤔 I’m a welder so, I make all kinda stuff! Never thought of this! I always used a vise and a torch! This will make life much easier! Thanks again!🇺🇸
I Agree 💯😊
Awesome 👌👌👌
❤️
Very good innovation 👏👏👏
Thank you 🤗
An example of mechanical advantage. Great idea.
I WANT that! And I have NOTHING to bend!
You’re just a natural bender I guess. 😂
There are so many steel rods that are awaiting to be bent out there😂
Super master. 👍👍👍🙋♂️🙋♂️🙋♂️👏👏👏
👊🏼
I love this video, but I would wear gloves!!! Great tool you made! I've needed that for fabrication! I going to show this to my welder friends!
Thanks
No idea how i got here.. but im glad i did lol.. Thats awesome!
Thank you 🤗
@@DIYFixMan No problem, I subbed as well. Hope you have more of these neat ideas :)
Creative design ! Super clever !
В гараже не осталось прямых деталей....все согнул
Не знаешь случайно какой подшипник нужен, от чего?
😂😂😂
6212 6214. Могут быть от чего угодно. В мосту на полуосях зилов старых возможно такие. У меня они в помойке валяются. А так в любом спец магазине
)
@@МыколаПитерский-б2щ Подшипник похоже с 100 серии.
best of best
That weld joint will be snapping soon as the continuously bending stress on it
Needed cleaned and a bit more amps, but awesome plan. What did that bearing set come out of?
Sure but this seemed more like quick (and genius) proof of concept. Stress points are easy to make much more durable.
Absolute Genius!