I'm replacing all my cat 5 with 6 or 7 now 8 I didn't know about 8 but I'm updating my network to all LAN / moca connections for anything on WiFi like phone etc hard waiting home with smart bulbs etc great video
Make no mistake about it; this is far the best tech channel on youtube. A four-year old wouldn't have any difficulties following the lessons. Thank you!
i last used a cross over cable in 2002 i think to connect a win 98 computer directly to a win xp computer and share the dial up internet and files from new win xp pc. a year later we got DSL installed in our city and i got a router.
JUST ANOTHER COMMENT LETTING YOU KNOW YOUR VIDEOS PROVIDE A LOT OF GOOD AND IMPORTANT INFORMATION IN THE MOST SIMPLEST AND EASIEST WAY ANYONE COULD. THANKS .
Very instructive videos as always, sir. It's also worth mentioning that, for example, Cat 5 cables use only 2 out of the 4 twisted pairs to reach 100 Mbps speed and to achieve 1 Gbps speed, all 4 pairs must work flawlessly or the speed will fall back to 100 Mbps.
I used to do the job of telecommunication engineering in Taiwan, and made a lot of Ethernet cable. It’s the first time I understand which is which instead of just verbatim and didn’t know why! Good work!
currently in school for computer tech and your videos explain things a million times better than the books and the teachers. you are going to be the reason why i find a good job later so thank you and keep up with the videos!
I'm a BSIT student who's having a hard time with computer networking. Your videos are really helpful, way better than my textbook! I hope you would keep more videos coming
Something not covered in this video, and very important for making patch cables, is the difference between solid and stranded wires. Some cable ends work well with either solid or stranded wires, while others only work well with stranded. In general, if you're making patch cables, go with stranded. Beyond that, if you're wiring inside the walls, make sure it's riser rated. That just means there's something (typically a string) inside the sheath that physically supports the weight of the wire other than the wires themselves. CAT6 comes in riser-rated varieties, but it's also inherently suitable for in-wall wiring by design, as there's a plastic separator between pairs that effectively supports the weight of the wire as well. If you're wiring a commercial building, you also need to make sure the wires are plenum rated. That means the outer sheath is of a material that will not catch fire when subjected to extreme heat (it'll just melt). The only other thing I'd add is that all modern ethernet switches automatically detect whether a cable is straight through or crossover, and set up the connection accordingly (it's called auto MDI-X). Even a lot of ports on NICs and laptops support auto MDI-X. So it generally doesn't matter which cable type you use, unless you're connecting older hardware.
S(hielded)TP is not the same what F(oiled)PT is. In STP shield is made as metal braid/mesh. FTP cables has metalized foil. Differences is that the STP needs to be connected with ground to work. FTP doesn't need (but can be if cable has special conductor strand) to be grounded because metalized foil distracts EMI on its surface. FTP should not be used whitout actual need; they can self-interfere. CAT 7 and 7a are not TIA/EIA standards and it are not backward compatible with 8p8c connectors. These are designed to use with GG45 or TERA connectors. Propper replacement for CAT 5e are CAT 6a and CAT 8 Class I which are use 8p8c.
@@PowerCertAnimatedVideos Hey. My enemy neighbours are using Illegal Signal Jammers against me, it's stopping me from attending online classes. Which method can bypass signal jammer? RJ45 cat7, way to go? What you think? Or should I call cops on my neighbours, but they will lend in jail for 5 years! Which I don't want!
German HD-SatCom engineer from the media industry (actually specialized on fiber optic connectors for SMPTE311 (Lemo,Neutrik,Canare) here: Don´t forget that the most common used RJ45 connectors on Cat7 declared cables (min. 600 class F -1000MHz class FA), will throttle the performance to ~ Cat 6/E. You will get the same 10GBit speed, but the operating frequency of the whole network distance, despite the usage of the better Cat 7 cable is shrinking . (Like running through a wide corridor, just to be slowed down by a small door) But that's a good explanation. Thumbs up.
When I used to pull cable, I can;t do ladder work for health reasons now, it always specified that we use STP. Especially if there were fluorescent light ballasts in the ceiling. Good video and well explained.
Crossover cables are more of a relic from the early 2000's at this point. My OG Xbox require them for systemlink. Everything else that I have can communicate with them over a standard cable.
I'm binge watching, too... Whether you're a technician or an average Joe, there's something for everyone, even if you know this stuff already. Thank you for these awesome presentations! By the way, I saw a video of a Category 8 cable being prepared. Each pair is shielded in addition to the bundle, and that serves a secondary purpose as the second wire in each pair doesn't usually have a stripe. The narrator indicated that the dyes used in other cables for the stripe can cause less than optimal results. Has anyone else heard that?
Thankyou for this video. I am taking network essentials in college. The textbook we use is quite scatterbrained, so I watch your videos to get to the point.
You are a life saver this video is just spot on with all the categories you have mentioned you have given explanation and have said what’s the speed it goes at on a local area network.
Actually, the other type of cable that you were showing was an FTP (Foiled Twisted Pair) cable. An STP cable has a woven shield around it. And also, there are other types of cables, too, like SFTP, or SSTP, where the second letter refers to the method the individual pairs are protected/
The funny side is that when i was a beginner in hardware i laughed at ftp telling the guy how can a cable enhance file transfer protocol and not http 😂
568 color wiring order really doesn't matter much anymore. The CAT quality is so good so making sure both ends are the same & pass a cable tester check, it's good.
Can you please make more videos? You are absolutely theeee best!!! I'm currently taking Network+ and will follow with CCNA1, 2, and 3. Such great help! Thank you
If someone don't want to watch whole video, Straight-through : Both ends T568A or both ends T568B, connects dissimilar devices, such as, pc to switch Crossover : One end T568A, other end T568B, connects network intermediary devices,such as, switch to switch
Note that while Auto-MDIX is an optional feature of the gigabit ethernet specification (IEEE 802.3-2008: "Implementation of an automatic MDI/MDI-X configuration is optional for 1000BASE-T devices"), most gigabit ethernet interfaces do implement it, so in most cases you will not need a special crossover cable
The STP you describe isn't an STP cable but an FTP cable. STP is similar to FTP but FTP only has a fieldprotection around the cable and STP has a fieldprotection around the cable and fieldprotection aroud each pair.
Some comments on here about crossover cables being ancient tech made me remember a time when a friend brought his pc to my home and we networked them together in the late 90's. Our NIC's didn't even have RJ45 ports by this point, instead we used BNC connectors.
I watch your videos since the textbooks do a poor job on layering subjects in a cohesive manner. You are a fantastic instructor and these videos are painstakingly edited with amazing quality and animations.
Hello dear sir! Please make video on Network Security and Cryptography. This channel helped me a lot. You are the true teacher. What a explanations. Thank you for saving my life
I love love your teaching it's so self-explanatory I'm a visual learner, you really help me understand how networking works thanks soo much for sharing your videos!!! This is awesome I looked at many videos yours is soo awesome!!
While technically true... but now a days any Ethernet device has straight to cross detection and will still function no matter if used straight or cross UTP cables .. since early 2000;s thats the standard as well auto detecting 10M, 100M, 1G, (10G) speeds / half or fulll duplex.
What I am wondering though is if the auto detection will require any additional overhead. If there is an efficiency that I can have I want to know about it. Removing the need of a process of needing to determine something that would be unneeded if wired correctly from the start sounds like an efficiency.
@@joeniemand5275 nope it's hardware detection. once you inserted the plug then the Ehternet chip knows it's pair configuration. no overhead no additional processing. it's a one time detection and then the hardware follows suit. It still does the same detection if your are putting in the "correct" cable but the chip still does same hardware config. the Ethernet chip has no preference, it does it's auto detection every time a cable is plugged in. (well a cable with a signal on it.)
I put cat8 in my house, I love it.figure 10gb computers will be main stream in coming years, means 4 devices per run. One thing to note, capping cat 8 cables isn’t as straight forward as others. They require special ends, that are larger so they can still be used with standard RJ45
FYI>>> If your crossover cable is too short, you can connect it to a straight & both will be a crossover cable If you connect 2 crossover cables together the result is a straight cable. !
Super well explained 👍 now I understand why should I use at least CAT 6 UTP cable in my house. Hope the cable company know this and don't use cheap cable.
Love these videos! Please do one with ip addressing (class range, CIDR notation, subnet mask range)? Can’t wait till everything’s covered really. Keep up the good work!
One major thing to clarify is that using a higher category of cable won't give you faster speeds on its own. The speed of any connection will be limited by the hardware on both ends. If both devices only support gigabit, there's no need to use anything higher than Cat5e. If they both support 10 gigabit, there's no need to use Cat8. Also, crossover cables are obsolete, as all Ethernet devices these days automatically detect whether cables are straight or crossover, and adjust accordingly. Gigabit devices can actually only work by doing this, as gigabit uses all four pairs and the blue and brown pairs are always straight through.
note to self and whom ever may need it: counting from the left the 568A is only different from the 568B because the first cable is swapped by the third and the secound is swapped with the sixth thats y i suggest memorising the 568B colour code
I have seen several instances of existing cat5e networks capable of doing 10Gbit/sec without any lost packages or other quality issues. So if you have that at home and want 10 Gbit, try the existing before ripping it all out.
Hi brother i have looking to atleast 10 + video of yours. It was really great ideas in a right time. So can you do a detail video on the topic which is most best Assemble or Branded computer (laptops/ Desktop etc). hope to see it. thanks for your great videos.
The difference between Categorys don't come from tight twist of pairs, it's the difference of gauge and quality of cooper that support different frequency : Cat5e 100MHz, Cat6 250MHz, Cat6A 500MHz.
3:55 Well, actually when you connecting the PC to the Router it should be a crossover cable. Of course, it would work perfectly with straight-through cable at this age but it's good to know the right one. You have amazing videos sir, thank you very much.
I still remember having to learn that there were two different kinds of ethernet cable configurations as a kid when I wanted to play duke nukem 3d with a friend on two different PCs in the same house, we still had dialup in those days, but both PCs had ethernet ports, and I was trying to use the far more common straight cable which I couldn't get to work. After a lot of research (Back then the internet was really new, really slow, and devoid of vast libraries of information like we have today.) I found out I needed the other cable configuration for direct communication between 2 pcs. But since that cable could not be bought at a store, I had to learn how to strip cables, and wire up one myself.
⭐Exclusive Deal. Get the VPN that I use (affiliate). nordvpn.com/powercert
Save 59% on a 2-year plan + 4 months free
I use cat 8. It’s insane!
ارجو توفير اللغة العربية
I'm replacing all my cat 5 with 6 or 7 now 8 I didn't know about 8 but I'm updating my network to all LAN / moca connections for anything on WiFi like phone etc hard waiting home with smart bulbs etc great video
Million Dollar Worth channel
[[((Oil look(po ò88 o'77 juju y
Have a job as a IT Tech Specialist. This channel is a life saver just to help memorize everything and to help touch-up info
Thanks for this comment! Cause he does teach some good stuff
Yeah, I just found out that I've been wiring 568B incorrectly all these years. I had blues and greens swapped.
Make no mistake about it; this is far the best tech channel on youtube. A four-year old wouldn't have any difficulties following the lessons. Thank you!
Yeah, the animations are super helpful, very informative video.
I've just found this channel and I have to say this is pure gold and treasure , big thank you
Pure trash
Pure Bitcoin pure gold crypto currency electric electrical electricity
@@Daniel-ep9ej Pure treasure
@@Daniel-ep9ej like u
@@Daniel-ep9ej Things only look dumb if you dont understand it.
Crossover cables... a blast from the past. Haven't heard of them in probably a decade.
i last used a cross over cable in 2002 i think to connect a win 98 computer directly to a win xp computer and share the dial up internet and files from new win xp pc. a year later we got DSL installed in our city and i got a router.
JUST ANOTHER COMMENT LETTING YOU KNOW YOUR VIDEOS PROVIDE A LOT OF GOOD AND IMPORTANT INFORMATION IN THE MOST SIMPLEST AND EASIEST WAY ANYONE COULD. THANKS .
Very instructive videos as always, sir.
It's also worth mentioning that, for example, Cat 5 cables use only 2 out of the 4 twisted pairs to reach 100 Mbps speed and to achieve 1 Gbps speed, all 4 pairs must work flawlessly or the speed will fall back to 100 Mbps.
I used to do the job of telecommunication engineering in Taiwan, and made a lot of Ethernet cable. It’s the first time I understand which is which instead of just verbatim and didn’t know why!
Good work!
currently in school for computer tech and your videos explain things a million times better than the books and the teachers.
you are going to be the reason why i find a good job later so thank you and keep up with the videos!
Thank you.
Note that CAT6 (no A) also does 10G, but limited to 55 meter. Apart from that, very good video.
@@SteinarMortensen ΑΛΗΜΠΑΜΠΑ
What type of job are u aiming for I’m starting to get into python programming I might actually go to school next year
@@SteinarMortensen I have 400mbp second download speed and 30 mbp upload speed, which cat cable do I use, I'm 50feet far from my router and modem
I literally spent so long trying to understand this and finally I get it…this channel is amazing!!!!
I'm a BSIT student who's having a hard time with computer networking. Your videos are really helpful, way better than my textbook! I hope you would keep more videos coming
literally the same situation as u i cant understand from the textbook only from this guy hes a legend
networking is a pain in the ass dude
0:50 The twists are to offset capacitance in the wire pairs. The pairs are twisted at different rates to reduce cross-talk.
Something not covered in this video, and very important for making patch cables, is the difference between solid and stranded wires. Some cable ends work well with either solid or stranded wires, while others only work well with stranded. In general, if you're making patch cables, go with stranded.
Beyond that, if you're wiring inside the walls, make sure it's riser rated. That just means there's something (typically a string) inside the sheath that physically supports the weight of the wire other than the wires themselves. CAT6 comes in riser-rated varieties, but it's also inherently suitable for in-wall wiring by design, as there's a plastic separator between pairs that effectively supports the weight of the wire as well. If you're wiring a commercial building, you also need to make sure the wires are plenum rated. That means the outer sheath is of a material that will not catch fire when subjected to extreme heat (it'll just melt).
The only other thing I'd add is that all modern ethernet switches automatically detect whether a cable is straight through or crossover, and set up the connection accordingly (it's called auto MDI-X). Even a lot of ports on NICs and laptops support auto MDI-X. So it generally doesn't matter which cable type you use, unless you're connecting older hardware.
fun fact: auto MDI-X is part of the gigabit spec - so any 1gbit port has it - hence if you use gbit crossover cables are obsolete
Thank you, it was good addition.
S(hielded)TP is not the same what F(oiled)PT is. In STP shield is made as metal braid/mesh. FTP cables has metalized foil. Differences is that the STP needs to be connected with ground to work. FTP doesn't need (but can be if cable has special conductor strand) to be grounded because metalized foil distracts EMI on its surface. FTP should not be used whitout actual need; they can self-interfere. CAT 7 and 7a are not TIA/EIA standards and it are not backward compatible with 8p8c connectors. These are designed to use with GG45 or TERA connectors. Propper replacement for CAT 5e are CAT 6a and CAT 8 Class I which are use 8p8c.
Can you pls a detailed video about it?
I am binge watching these videos. It's like a very hungry and lost person finally found food!:)
Glad you like them!
Same here. I knew a little bit about a little bit... But your very thorough explanations are like Man discovering fire...Many Aha moments. Thanks.
@@PowerCertAnimatedVideos Hey. My enemy neighbours are using Illegal Signal Jammers against me, it's stopping me from attending online classes.
Which method can bypass signal jammer? RJ45 cat7, way to go? What you think? Or should I call cops on my neighbours, but they will lend in jail for 5 years! Which I don't want!
@@josealfredfernandes any updates??
@@miresoman1769 cat7 works! Jammers don't interfere!
As a BICSI level 1 student getting ready to take my hands on test and written exam; this video helps reinforce the text material!
Nice videos, helping me to study for my Comptia A+ exam.
Sir , What is the magic that only you feed anything easily in to our mind, ??
Seriously.. Awesome .
why am i finding all these videos now T_T, thank you for simplifying all the explanation powercert!
German HD-SatCom engineer from the media industry (actually specialized on fiber optic connectors for SMPTE311 (Lemo,Neutrik,Canare) here: Don´t forget that the most common used RJ45 connectors on Cat7 declared cables (min. 600 class F -1000MHz class FA), will
throttle the performance to ~ Cat 6/E. You will get the same 10GBit speed, but the operating frequency of the whole network distance, despite the usage of the better Cat 7 cable is shrinking . (Like running through a
wide corridor, just to be slowed down by a small door)
But that's a good explanation. Thumbs up.
When I used to pull cable, I can;t do ladder work for health reasons now, it always specified that we use STP. Especially if there were fluorescent light ballasts in the ceiling. Good video and well explained.
I used to watch your videos before I had my certs. Nostalgia 🤗
Crossover cables are more of a relic from the early 2000's at this point. My OG Xbox require them for systemlink. Everything else that I have can communicate with them over a standard cable.
I'm binge watching, too... Whether you're a technician or an average Joe, there's something for everyone, even if you know this stuff already. Thank you for these awesome presentations! By the way, I saw a video of a Category 8 cable being prepared. Each pair is shielded in addition to the bundle, and that serves a secondary purpose as the second wire in each pair doesn't usually have a stripe. The narrator indicated that the dyes used in other cables for the stripe can cause less than optimal results. Has anyone else heard that?
AWESOME !!! Best explanation ever on TH-cam. Wish everybody would be this detailed.
Clear as a bell 10/10
Thankyou for this video. I am taking network essentials in college. The textbook we use is quite scatterbrained, so I watch your videos to get to the point.
Thank you.
Best TH-cam channel for Networking
Thanks
You are a life saver this video is just spot on with all the categories you have mentioned you have given explanation and have said what’s the speed it goes at on a local area network.
This is the best video on twisted pair cable........Thanks a lot for this video
Actually, the other type of cable that you were showing was an FTP (Foiled Twisted Pair) cable. An STP cable has a woven shield around it. And also, there are other types of cables, too, like SFTP, or SSTP, where the second letter refers to the method the individual pairs are protected/
The funny side is that when i was a beginner in hardware i laughed at ftp telling the guy how can a cable enhance file transfer protocol and not http 😂
@@AlianeAbdelouahab Yeah, idk why they settled on the same acronym as FTP for that.
pass through rj45 is a blessing
568 color wiring order really doesn't matter much anymore. The CAT quality is so good so making sure both ends are the same & pass a cable tester check, it's good.
that's a PowerPoint Presentation. And i loved this.
Thank you so much for your great service. please teach us about Access control system, CCTV, IDS and more.
Can you please make more videos? You are absolutely theeee best!!! I'm currently taking Network+ and will follow with CCNA1, 2, and 3.
Such great help!
Thank you
I have found that this site gives a very straight lesson. A very good thanks to them.
About a million years ago, network cards and devices learned and adapted to not care whether a cable is straight or crossover :D
I didn't even know Cat 8 was developed and out on the market! Great video as always.
Same with 7 😆
Great video, could explain the OSI model, and TCP/IP model. Thank you
If someone don't want to watch whole video,
Straight-through : Both ends T568A or both ends T568B, connects dissimilar devices, such as, pc to switch
Crossover : One end T568A, other end T568B, connects network intermediary devices,such as, switch to switch
Thanks for your explanation.... I had much doubts about this topic.
Now I could learning that the CAT5e is the minimum allowed cable to get 1Gb
Note that while Auto-MDIX is an optional feature of the gigabit ethernet specification (IEEE 802.3-2008: "Implementation of an automatic MDI/MDI-X configuration is optional for 1000BASE-T devices"), most gigabit ethernet interfaces do implement it, so in most cases you will not need a special crossover cable
Good point
@Eddie Lim, Thanks. 😊
This video is awesome, it just simplified network cables in less than 10 minutes. Thank you!
The STP you describe isn't an STP cable but an FTP cable. STP is similar to FTP but FTP only has a fieldprotection around the cable and STP has a fieldprotection around the cable and fieldprotection aroud each pair.
This video was so clear, I am now a network engineer.
This is the best video I’ve seen on this topic. Thank you!
Some comments on here about crossover cables being ancient tech made me remember a time when a friend brought his pc to my home and we networked them together in the late 90's. Our NIC's didn't even have RJ45 ports by this point, instead we used BNC connectors.
I watch your videos since the textbooks do a poor job on layering subjects in a cohesive manner. You are a fantastic instructor and these videos are painstakingly edited with amazing quality and animations.
Thank you so much for creating a channel like this and giving wisdom to all the people. I really appreciate it. God bless ❤❤❤
Best of best videos. Explained really well.
The way you explain is so easy to understand. Thankyou so much for your efforts 💜
Hello dear sir! Please make video on Network Security and Cryptography. This channel helped me a lot. You are the true teacher. What a explanations. Thank you for saving my life
Thanks....I may.
your videos are great!! simple to understand, really helping me with my IT schooling.
Why are these great videos just now being made? Also the 4:3 aspect ratio is nostalgic.
.....
@@madworld. He didnt say it was bad, just nostalgic
Or the type b for examples
4:3 is probably because it was made in PowerPoint
Aprendi mas con el, que lo que me enseñaron en el colegio! Good video!
I wish I had started my networking journey with this video. Clearly explains all the basics.
I love love your teaching it's so self-explanatory I'm a visual learner, you really help me understand how networking works thanks soo much for sharing your videos!!! This is awesome I looked at many videos yours is soo awesome!!
Best quality videos. The graphics are awesome and easy to watch. Thank you PowerCert
I have exam tomorrow and this vidio really helped me thank u
While technically true... but now a days any Ethernet device has straight to cross detection and will still function no matter if used straight or cross UTP cables .. since early 2000;s thats the standard as well auto detecting 10M, 100M, 1G, (10G) speeds / half or fulll duplex.
I observed that when I connected 2 laptops with a straight cable
This worked for me as well when I was able to get a GIGE Vision camera working using a patch cable. Really nice feature.
What I am wondering though is if the auto detection will require any additional overhead. If there is an efficiency that I can have I want to know about it. Removing the need of a process of needing to determine something that would be unneeded if wired correctly from the start sounds like an efficiency.
@@joeniemand5275 nope it's hardware detection. once you inserted the plug then the Ehternet chip knows it's pair configuration. no overhead no additional processing. it's a one time detection and then the hardware follows suit. It still does the same detection if your are putting in the "correct" cable but the chip still does same hardware config. the Ethernet chip has no preference, it does it's auto detection every time a cable is plugged in. (well a cable with a signal on it.)
Truuue
I put cat8 in my house, I love it.figure 10gb computers will be main stream in coming years, means 4 devices per run. One thing to note, capping cat 8 cables isn’t as straight forward as others. They require special ends, that are larger so they can still be used with standard RJ45
FYI>>>
If your crossover cable is too short, you can connect it to a straight & both will be a crossover cable
If you connect 2 crossover cables together the result is a straight cable.
!
sometimes 2 wrongs make a right
Fantastic job. Congratulations! With your permission, I will use your material in my classes. Thanks.
Yes..as long as you stream it from youtube.
@@PowerCertAnimatedVideos That's what it will be like. Thank you so much!
i hope youtube is paying you man... this videos are gold
Super well explained 👍 now I understand why should I use at least CAT 6 UTP cable in my house. Hope the cable company know this and don't use cheap cable.
Love these videos! Please do one with ip addressing (class range, CIDR notation, subnet mask range)? Can’t wait till everything’s covered really. Keep up the good work!
One major thing to clarify is that using a higher category of cable won't give you faster speeds on its own. The speed of any connection will be limited by the hardware on both ends. If both devices only support gigabit, there's no need to use anything higher than Cat5e. If they both support 10 gigabit, there's no need to use Cat8.
Also, crossover cables are obsolete, as all Ethernet devices these days automatically detect whether cables are straight or crossover, and adjust accordingly. Gigabit devices can actually only work by doing this, as gigabit uses all four pairs and the blue and brown pairs are always straight through.
By far the clearest explanation. Excellent vid!
I can't thank you enough for all of these videos, honestly, you are an absolute legend
just PERFECT tutorial video. Short, simple and educational!!! All information we need about these cables.
Amazing, plain and simple content, as usual.
I'd love to see future videos on Active Directory and RADIUS!
nice explanation
Im always watch your videos and it is very understandble
FROM PHILIPPINES
Thanks.
@@PowerCertAnimatedVideos welcome
Do you upload comptia security +
I do not.
Ok
My modules brought me here
note to self and whom ever may need it: counting from the left the 568A is only different from the 568B because the first cable is swapped by the third and the secound is swapped with the sixth thats y i suggest memorising the 568B colour code
I have seen several instances of existing cat5e networks capable of doing 10Gbit/sec without any lost packages or other quality issues. So if you have that at home and want 10 Gbit, try the existing before ripping it all out.
Without seen a single frame of your video, i have hit like button.
Superbly explained, very good animation and clarity
Omg i haven't read my chapters on cabling but this video helped out alot
The animation in the video are simply awesome. Without it, I will probably understand less than 10 pct of what is shared.
Thank you.
Very clear voice makes very easy to understand. Great work
crossover cables are very very rare at this point, don't even remember the last time I used them and I've been in the industry for 15 years..
Awesome content as usually!!!😊 keep up the good work ,loving your channel!
I've learned a lot more from your videos than I did at school. Thank you! Keep up the good content!.
thank you very much for your explanation i never understood the difference between straight through and crossover
ধন্যবাদ স্যার,অনেক সহজ হলো
Hi brother i have looking to atleast 10 + video of yours. It was really great ideas in a right time. So can you do a detail video on the topic which is most best Assemble or Branded computer (laptops/ Desktop etc). hope to see it. thanks for your great videos.
Thank you sir i very very proud of you and very much for my help by this vedio and all all and all
That was a good clear explanation about these cables. Especially the differences between straight and cross over cables. Thanks alot for this lesson.👍
No need for cross patch cables since connection is detected by switches no older than 20 years...
@@DoktorStutz True, but I don't think PC NICs are that smart, although I've never connected 2 PCs together.
The difference between Categorys don't come from tight twist of pairs, it's the difference of gauge and quality of cooper that support different frequency : Cat5e 100MHz, Cat6 250MHz, Cat6A 500MHz.
3:55 Well, actually when you connecting the PC to the Router it should be a crossover cable. Of course, it would work perfectly with straight-through cable at this age but it's good to know the right one.
You have amazing videos sir, thank you very much.
All of the video here are very helpful
Very informative and easy to follow video 👍 Now that I know what cable to run, time to find a video showing how to run Ethernet through a house.
Very concise and clear explanation of ethernet cables. Thank you.
I still remember having to learn that there were two different kinds of ethernet cable configurations as a kid when I wanted to play duke nukem 3d with a friend on two different PCs in the same house, we still had dialup in those days, but both PCs had ethernet ports, and I was trying to use the far more common straight cable which I couldn't get to work. After a lot of research (Back then the internet was really new, really slow, and devoid of vast libraries of information like we have today.) I found out I needed the other cable configuration for direct communication between 2 pcs. But since that cable could not be bought at a store, I had to learn how to strip cables, and wire up one myself.
Nice, simple and to the point. Great video thanks a lot!
thank you you saved our movie night. Dog chewed cable and its too icy and late to drive for a new one. thanks
Explain the process in great detail
Our IT teacher always opens these Videos to teach us, and I accidentally got it
Explained very well.... Clear and straightforward explaination