T-spline modelling inside revit. Or revit can understand triangulated faceted meshes. System families for kitchen cabinets, sidewalks, roads and siteworks. Photogrammetry. These are my top wishlist
I use Revit for Residential and it is would be nice if Revit offered more functionality for Dimensioning. AutoCad for instance will allow you to dimension practically anything. Sometimes I would like to dimension along the diagonal of a Wall containing a Bay Window for instance, and Revit will not do it. I can pull off of a Wall to a point and get a dimension that way, but it will not allow me to pick a point in two locations and pull a dimension between those points. I would really like to see Autodesk fix this in Revit. Nice video of the new features in R2023
This is opposite of the functioning of spines. Splines are Nurbs. In a mathematical function, nurbs are calculus and lines are algebraic. They can’t go together because this would be to difficult for calculating. Side note, I don’t know what point clouds would have to do with splines.
It would be so amazing for creating DA or graphical floor plans in revit if you had the ability to change the opacity of a placed pdf or image so you can make custom graphic tree images and have them on site plans to limit the need for back and forth from photoshop. The ability is already there but its limited to 'decal' only so it would be great if the just extended it to basic pdf and image imports
This is a very common issue. The best way is to create your sheet, and add the color fills in post photoshop. I have made 400 different tree family’s, and at the end of day, Revit doesn’t support transparency. You can Create a tree family, with a solid circle in plan, and use view templates to adjust the transparency, but there is no way to get it to look correct, because Revit just doesn’t support transparency.
It is good that they added option to cut views option in families, but I rather prefer if autodesk could have placed the tickbox option inside the project already, not in the family editor. Since you have the freedom to decide whether you need to cut view or not in a specific view of that the same family without the hassle of reeditting the family in editor again and saving as new family.
Alls I'm saying is if there isn't an option to turn off that stupid pop up 'can't join elements ' or whatever, during modelling, when it's obvious that's what you want to do. I'm gonna go to Autodesk offices and freak out in reception (joke) better say that as we know words are now harmful. anyway...its OK if it's just once but when it pops up over and over...come on Auto desk sort this out! It's when you move something that was joined, could be a beam, col, even a detail line. And if your doing it a lot for amendments to a model say, then it's very very annoying and it needs sorting
I do bim for an electrical contractor in the dc area. I’ve been using autocad mep for 7 years now. It’s all I know and I’m pretty efficient with it. Has anyone used both revit and autocad and can tell me if it’s worth switching to revit? And why?
Hi Balkan, I have been trying to follow along with your tutorials but I cannot change my project units to what you prescribe. In the format there is only degrees, gradians, radians and degrees minutes seconds. No other options are listed, how can I fix this?
there still a huge huge place for improvments ... in stead of this diarrhea of new versions each few monthes let it be once a year with real improvements ... typical Autodesk! I guess they dont involve users sufficiently in their development
As a structural engineer, working with Architects using ArchiCAD and .ifc's is a nightmare... About time you guys moved over so everything can be in the same package i.e. arch, struc & MEP etc.
@@jameshendry27 that'd be a huge shame as it's good for everyone to have competition. Autodesk need to play ball with IFCs, there's some hope with r 2023. I used to use Archicad but have been a Revit user for the last 14 years.
So nothing great ? They still fail. Some dude on reddit who works for Autodesk said they work with famous architects . I laughed because the software does not show one hint of architecture knowledge Revit need to scrap the old spaghetti code and build new foundation.
It would have made for a really short video if you had just said "another year with relatively insignificant upgrades". It's 2023 and there still is no automatic spellcheck. If I want wood framing in walls, i need to spend another $1000 per year with a separate vendor. Boo on autodesk AGAIN
I hope Revit cud really bring a feature where you can open windows and doors easily jus like in Archicad instead of having to download certain components that have the feature or editing them... it's really useful for presentations... i love revit it's straight forward... but i don't like how sometimes i have to look to other softwares jus to get one feature to have a complete model...
I’ve been doing BIM for almost 20 years. Firstly, it’s super easy to create a family with open doors, but most importantly, why would you want to show show open doors? In plan, you can easily Create a door that has adjustable swing radius. I suppose if you want to make an animation of a door opening in 3D? If so you would use 3ds Max. If you are wanting to do something just because ArchiCAD can do it, there is something fundamentally wrong with your thinking. In plan, we show doors open, in elevation we show doors closed. That is because of industry graphic standards.
@@DevinSheaProductions I've been teaching myself Revit really been using it for 2 years now so creating families from scratch is challenging for me at the moment... I do presentations i need them for those... I'm not even familiar with 3ds Max...
if they are going to keep charging and increasing their prices... they need to start justifying with more features. !00% monopolistic business tendencies
If Autodesk stopped jerking around with creating a new Revit for "fixes", they would actually be going somewhere. -This year new Revit feature, landscape finally turns the right way, yaaaay. It took us one year, new Revit and your welcome. Better they come with new Revit version every two years and truly work on the engine of Revit. I bet you next year they will come out with new room colours as default. "Improvements for Revit"
Though some of these features will aid in workflows overall think this a very disappointing weak release. Was really hoping to see real 3D walls and topography improvements as listed on the road map. With any luck we will see this in Revit 2024. IMO the features that requires drastic improvement are Schedules(functionality and customisation) and Legends.
Hi Balkan, Any news about the building pads? At our office we usually work with "underground" buildings and this is always a pain to make a building pad and then there's no way to make a topography above it, so we have to use a floor or a roof to simulate the topography. Any news about this?
The contour labels lining up one way is against the rules of cartography. Text should be always rotated with the top showing uphill direction. Easier to read. But it's more applicable to large scale elevation maps and less important for site plans.
I don't want to sound harsh but Revit requires a better GUI, a geometry modeler like Rhinoceros and an easier approach for design. It's a great program for documentation on anything but the price is too high for a single user and the license is not permanent. Of course commercial licenses should be of course handled accordingly but this program begs for an easy entry to new users. It has so much potential since every object is simply parametric. Revit is a DATABASE that provides information of a building in exact terms of simulation. Anyway, those are my two cents. I hope the company reconsiders like Epic is doing with single users in Unreal engine 5. Revit is super important for game design too.
I cannot understand why can´t Autodesk make all of these changes an update for Revit 2020. Why force us to download a whole new program that has barely anything new. It´s good that theyr´e improving the program but damn... They can´t even help themselves.
OMG revit is still so crap! no basic functions like batch printing or parametric families for the most basic elements like doors and windows. I'm sure that by version 105 these basic things might be included.
The one and the basic thing i miss on all revit software is "we should always import component by draging but i prefer like archicad which is using the components(furniture) right away from the software
I am glad revit is finally cleaning up their act. Fixing old potholes and thinking about user expirience rather than selling you new 360 stuff and rising prices on subscriptions.
I don't recommend upgrading to revit 2023 if you use lumion, the LiveSync option is not to date. I kinda need to restart my whole project 3 days before the deadline due to revit not allowing upgraded models to go back to an old version. Or please let me know if you have a fix to this, it would really help.
Key thing for me with this update is improved 3d modeling speed. It's no longer laggy or bogged down, and has a few key additions that make 2023 what 2022 should have been.
Wow yeaah new cool features! Engine optimization? Wall finishes? Maybe, at least freakin’ holes by ducts and pipes in structural elements? Better connection to navisworks? Oh yea boiiii we have now new parameters for filter, and now you can change view if you will remember which views you placed, otherwise you get this shitty error. Yeah nice
!!RECOMMENDATION!! -------------------------------------- Am kindly asking Revit Auto desk to create continue multiples rendering and automatically saving them. Meaning, one at the time when camera view 1&2 are setup, after view 1 rendering is over, view 2 will automatically start while view 1 will be automatically save.
Though not documented a bug report I made is been rectified. In 2022 and previous could only digit group as this 123 456 789,000 there was no option to replace comma with period unless comma as digit grouping ie 123,456,789.000. Just checked 2023 and now can have as 123 456 789.000
Due to the new structural enhancements, there is no longer a button called "Enable Analytical Model". Am I right? When I watched the Revit tutorials of 2021, this option exists, but I can not see it in Revit 2023. Thanks in advance!
i am simple i just want revit show curve on elevations... so i dont need to use shadow to show the curve surface.... give it some line work shows its not flat....
Thank you for your videos, they are my first port of call when seeing what is new. Now my question, when will Revit allow us to schedule the coordinates for piles in foundations. I know you can buy an add on but surely this is a basic thing that should come with Revit; or have I missed it and it is already in Revit (NOT Dynamo).
Thanks for such great vedio. Looking forward for the video of connection automation. I am interested to know if there are some new features regarding generative design and interference with Dynamo. Thanks in advance.
@@JerryAnsahAyim that's the worst combination possible due to the known communication issues graphic/processor because of the south bridge gate problem. Why do you think this combination is selling for around £1000?
T-spline modelling inside revit. Or revit can understand triangulated faceted meshes. System families for kitchen cabinets, sidewalks, roads and siteworks. Photogrammetry. These are my top wishlist
I use Revit for Residential and it is would be nice if Revit offered more functionality for Dimensioning. AutoCad for instance will allow you to dimension practically anything. Sometimes I would like to dimension along the diagonal of a Wall containing a Bay Window for instance, and Revit will not do it. I can pull off of a Wall to a point and get a dimension that way, but it will not allow me to pick a point in two locations and pull a dimension between those points. I would really like to see Autodesk fix this in Revit. Nice video of the new features in R2023
revit needs to enable spline lines to fillet with other lines. As someone who works with point clouds it’s quite necessary
This would be a miracle. Maybe in 5D.
This is opposite of the functioning of spines. Splines are Nurbs. In a mathematical function, nurbs are calculus and lines are algebraic. They can’t go together because this would be to difficult for calculating. Side note, I don’t know what point clouds would have to do with splines.
you're the best, thanks!
Some of a lot of all of the features, a tons of new features. I like the sound of this.
It would be so amazing for creating DA or graphical floor plans in revit if you had the ability to change the opacity of a placed pdf or image so you can make custom graphic tree images and have them on site plans to limit the need for back and forth from photoshop. The ability is already there but its limited to 'decal' only so it would be great if the just extended it to basic pdf and image imports
This is a very common issue. The best way is to create your sheet, and add the color fills in post photoshop. I have made 400 different tree family’s, and at the end of day, Revit doesn’t support transparency. You can Create a tree family, with a solid circle in plan, and use view templates to adjust the transparency, but there is no way to get it to look correct, because Revit just doesn’t support transparency.
It is good that they added option to cut views option in families, but I rather prefer if autodesk could have placed the tickbox option inside the project already, not in the family editor. Since you have the freedom to decide whether you need to cut view or not in a specific view of that the same family without the hassle of reeditting the family in editor again and saving as new family.
Exactly what I was thinking.
Yes your video are good
WHERE IS DARK MODE!!! Seriously, why has Revit not added a dark mode yet. I don't like burning my eyes out while using Revit.
Thanx i love your videos
Plz make a solar studies with revit 2023 :D
thanks great video
Alls I'm saying is if there isn't an option to turn off that stupid pop up 'can't join elements ' or whatever, during modelling, when it's obvious that's what you want to do. I'm gonna go to Autodesk offices and freak out in reception (joke) better say that as we know words are now harmful. anyway...its OK if it's just once but when it pops up over and over...come on Auto desk sort this out! It's when you move something that was joined, could be a beam, col, even a detail line. And if your doing it a lot for amendments to a model say, then it's very very annoying and it needs sorting
But cutting the desk does not show the cut drawers, its just a blank cut
Some valuable minor additions and refinements but generally disappointing.
Any insight in Insight 360? and can it be replaced with Autodesk CFD?
I do bim for an electrical contractor in the dc area. I’ve been using autocad mep for 7 years now. It’s all I know and I’m pretty efficient with it. Has anyone used both revit and autocad and can tell me if it’s worth switching to revit? And why?
Hi Balkan, I have been trying to follow along with your tutorials but I cannot change my project units to what you prescribe. In the format there is only degrees, gradians, radians and degrees minutes seconds. No other options are listed, how can I fix this?
”Perhaps” you should have shut down your heating fan (or ?) off, there is anointing noise on the back ground !
Boo whoooo
optimization and smooth workflow are appreciated, but from the creative side of things this update sucks
Still no vector shadows on PDF??????
Can someone open a rvt 2023 file using a Revit 2022 software?
I wonder if you can suppress 0 feet ?
I know that you can suppress 0 inches.
Oh, finally after 20 years Revit catch up with ArchiCAD! Now Revit adeps cam measure in 3D without any extra magic moves!
there still a huge huge place for improvments ... in stead of this diarrhea of new versions each few monthes let it be once a year with real improvements ... typical Autodesk!
I guess they dont involve users sufficiently in their development
And it's still not as good, because ArchiCAD can measure diagonals and automatically tell you the component xyz distances!
@@samoxflox9261 wait.. I didn't say a word about Browser organization yet.....
As a structural engineer, working with Architects using ArchiCAD and .ifc's is a nightmare... About time you guys moved over so everything can be in the same package i.e. arch, struc & MEP etc.
@@jameshendry27 that'd be a huge shame as it's good for everyone to have competition. Autodesk need to play ball with IFCs, there's some hope with r 2023. I used to use Archicad but have been a Revit user for the last 14 years.
So nothing great ? They still fail. Some dude on reddit who works for Autodesk said they work with famous architects . I laughed because the software does not show one hint of architecture knowledge
Revit need to scrap the old spaghetti code and build new foundation.
I wonder why autodesk didn't add yet transparency option for imported images. In some cases i need a image to be transparent.
I found this update weak.
It would have made for a really short video if you had just said "another year with relatively insignificant upgrades". It's 2023 and there still is no automatic spellcheck. If I want wood framing in walls, i need to spend another $1000 per year with a separate vendor. Boo on autodesk AGAIN
I hope Revit cud really bring a feature where you can open windows and doors easily jus like in Archicad instead of having to download certain components that have the feature or editing them... it's really useful for presentations... i love revit it's straight forward... but i don't like how sometimes i have to look to other softwares jus to get one feature to have a complete model...
i was strugglin with that problem my self also the cabinet and furniture edit are better in archicad
I’ve been doing BIM for almost 20 years. Firstly, it’s super easy to create a family with open doors, but most importantly, why would you want to show show open doors? In plan, you can easily Create a door that has adjustable swing radius. I suppose if you want to make an animation of a door opening in 3D? If so you would use 3ds Max. If you are wanting to do something just because ArchiCAD can do it, there is something fundamentally wrong with your thinking. In plan, we show doors open, in elevation we show doors closed. That is because of industry graphic standards.
@@DevinSheaProductions I've been teaching myself Revit really been using it for 2 years now so creating families from scratch is challenging for me at the moment... I do presentations i need them for those... I'm not even familiar with 3ds Max...
Autodesk tinkering around the edges again. Very few mods worth talking about.
I am currently using 2018 for some ongoing megaprojects, and 2020 for other huge projects. Not sure if I will ever need 2023...
This is essentially Revit 2021 part 3. Shame Autodesk are not seeking more efficient or innovative ways of improving Revit
Lmao yeah, well said
Disappointing again...Just some tiny improvement...
if they are going to keep charging and increasing their prices... they need to start justifying with more features.
!00% monopolistic business tendencies
Room tag leaders are no new feature - those are available since Revit 2017 at least.
i don't like the new icon logo
If Autodesk stopped jerking around with creating a new Revit for "fixes", they would actually be going somewhere.
-This year new Revit feature, landscape finally turns the right way, yaaaay. It took us one year, new Revit and your welcome.
Better they come with new Revit version every two years and truly work on the engine of Revit.
I bet you next year they will come out with new room colours as default. "Improvements for Revit"
Im pretty sure they changed the room colors last year haha.
Thanks! I don’t know what you guys think but this update is disappointing.
IFC is improved too. But honestly…
What about lining up text etc…
Saw this added on the road map so probably a 2023.1 improvement in about 6 months time.
@@willislinks thanks 👍🏼✌🏼
whats new in future ??
subscription that u cant afford !!! lol
Though some of these features will aid in workflows overall think this a very disappointing weak release. Was really hoping to see real 3D walls and topography improvements as listed on the road map. With any luck we will see this in Revit 2024. IMO the features that requires drastic improvement are Schedules(functionality and customisation) and Legends.
Your prayers have been answered ;)
Hi Balkan,
Any news about the building pads? At our office we usually work with "underground" buildings and this is always a pain to make a building pad and then there's no way to make a topography above it, so we have to use a floor or a roof to simulate the topography. Any news about this?
he did a video explaining how to avoid this problem but you will be creating a 3d object and place earth as material for it
The contour labels lining up one way is against the rules of cartography. Text should be always rotated with the top showing uphill direction. Easier to read. But it's more applicable to large scale elevation maps and less important for site plans.
Hopeless improvement ....by ADSK REVIT 2023 ...even the NAVISWORK is horrible ..sorry thats is my opinion ..
I don't want to sound harsh but Revit requires a better GUI, a geometry modeler like Rhinoceros and an easier approach for design. It's a great program for documentation on anything but the price is too high for a single user and the license is not permanent.
Of course commercial licenses should be of course handled accordingly but this program begs for an easy entry to new users. It has so much potential since every object is simply parametric.
Revit is a DATABASE that provides information of a building in exact terms of simulation. Anyway, those are my two cents. I hope the company reconsiders like Epic is doing with single users in Unreal engine 5. Revit is super important for game design too.
I cannot understand why can´t Autodesk make all of these changes an update for Revit 2020. Why force us to download a whole new program that has barely anything new. It´s good that theyr´e improving the program but damn... They can´t even help themselves.
OMG revit is still so crap! no basic functions like batch printing or parametric families for the most basic elements like doors and windows. I'm sure that by version 105 these basic things might be included.
how to show revit 2023 add-in like bluebeam, formit, bexelmanager, datasmith plugins in new revit version
The one and the basic thing i miss on all revit software is "we should always import component by draging but i prefer like archicad which is using the components(furniture) right away from the software
I am glad revit is finally cleaning up their act. Fixing old potholes and thinking about user expirience rather than selling you new 360 stuff and rising prices on subscriptions.
I don't recommend upgrading to revit 2023 if you use lumion, the LiveSync option is not to date. I kinda need to restart my whole project 3 days before the deadline due to revit not allowing upgraded models to go back to an old version. Or please let me know if you have a fix to this, it would really help.
try importing to lumion as fbx file
@@noelgustav Thank you! this does seem to work and will save a lot of time.
19:00 The ability to turn the leaders on for room tags was available starting from 2021, as far as I can remember, I use that feature a lot.
I remember using this since always...
could you please tell me if pyrevit plugins works on it or not because it doesn't appear in revit 2023
It's easier to uninstall Revit in the latest release. Big improvement! Srsly, try it yourself ;)
Did they finally overcome the seemingly massive hurdle to adding a strike-through option for text?
Draw a line
How to show up hidden commands in revit like
Navigation pane sitting of Wall?
New icon!
Please where can get revit new materials ??? Doors 🚪 windows 🪟 etc
obsessed with soft design now and more obsessed with cool scales Nd stuff.
In the futur i would like a dark mode for Revit
Key thing for me with this update is improved 3d modeling speed. It's no longer laggy or bogged down, and has a few key additions that make 2023 what 2022 should have been.
Solar studies is nothing new! 😆
The most important missing point is to extract bar bending schedule
How do you zoom in when you dont have mouse
HOW COOL LOOKING WITH BEARD...
Connection automation video comming?
Wow yeaah new cool features! Engine optimization? Wall finishes? Maybe, at least freakin’ holes by ducts and pipes in structural elements? Better connection to navisworks? Oh yea boiiii we have now new parameters for filter, and now you can change view if you will remember which views you placed, otherwise you get this shitty error. Yeah nice
!!RECOMMENDATION!!
--------------------------------------
Am kindly asking Revit Auto desk to create continue multiples rendering and automatically saving them.
Meaning, one at the time when camera view 1&2 are setup, after view 1 rendering is over, view 2 will automatically start while view 1 will be automatically save.
When do they add a f#@%ng dark theme to the UI?????????? Sadists.
Lol easy adjustment in menu's
great video. thank you
Though not documented a bug report I made is been rectified. In 2022 and previous could only digit group as this 123 456 789,000 there was no option to replace comma with period unless comma as digit grouping ie 123,456,789.000. Just checked 2023 and now can have as 123 456 789.000
Due to the new structural enhancements, there is no longer a button called "Enable Analytical Model". Am I right? When I watched the Revit tutorials of 2021, this option exists, but I can not see it in Revit 2023. Thanks in advance!
I'm sorry but.... Meh!
as a person starting to study revit, starting on 2022 and IMEDIATELY updating to these newer more complicated features is more than confusing
Thanks for the info..
Interesting! Is there anything, here, that has the ability to produce a 3D sectional drawing?
Is revit ever coming to mac os ?
i am simple i just want revit show curve on elevations... so i dont need to use shadow to show the curve surface.... give it some line work shows its not flat....
amazing !!
Twinmotion?
I was doing solar studies in Revit 15 years ago... I did a beautiful one with music and video for a member of the Leon's furniture family.
Starts at 2:50
Necesitas una buena Afeitada Arqui!!
Thank you for your videos, they are my first port of call when seeing what is new. Now my question, when will Revit allow us to schedule the coordinates for piles in foundations. I know you can buy an add on but surely this is a basic thing that should come with Revit; or have I missed it and it is already in Revit (NOT Dynamo).
I'd appreciate it if you can take a minute and please comment on which of these Revit 2023 improvements will also be found in Revit LT 2023? Thanks.
Thanks for such great vedio. Looking forward for the video of connection automation. I am interested to know if there are some new features regarding generative design and interference with Dynamo. Thanks in advance.
Autodesk should develop a dedicated new icon in the massing and site how to draw Roads and sidewalks ( with diff elevations etc).
Pick a plane, I set up a shortcut for this back in 2017.
I think the room tag leader line option is available earlier. Currently i am using Revit 2020 and this feature is already there.
Aun no se puede anexar la forma del refuerzo en la tabla de cantidades de manera automatica? Tantas versiones y aun no mejora eso. 😔
Thank you so much sir for the very important information and mostly I like the 5 new changes
I would really appreciate it if you do a tutorial on solar studies in revit😃
is there a way to measure a line and it will give you its bearing and distance value?
Excited cos I've got a new laptop on the way with an rtx 3070 😎 Revit will flow smoothly on it
I have bad news for you😂😂
The thing is that Revit does not care about you graphics card.
Yep, and mostly single core performance. It doesn't do multi-core either.
Lol the 3070 for rendering (lumion) and ryzen 7 5800h for revit
@@JerryAnsahAyim that's the worst combination possible due to the known communication issues graphic/processor because of the south bridge gate problem. Why do you think this combination is selling for around £1000?
Thanks for the update and we appreciate your time.
Looking forward to try it, pick plane is more fast, it's a bit frustrating that Revit doesn't include shortcuts for all commands.
View/ user interface/ keyboard shortcuts. Tada! You can add, modify and remove as you please, plus upload them between updates seamlessly
Can you save the edited View Order when printing?
Could you please do a video for solar analysis.
The room tag and solar study was already in old versions
Good Temerinski. Thanks for the share.
Me expecting a true axonometric view to come to Revit 🤡
Love your videos. Thank you.