Good day Sir I have got a very complex loft that I am not able to solve. It is the cowling of my airplane that I am trying to make it new style. Would you be able to give me a help? Of course I could forward the sketch and guide curves. It is very complex! Thanks Regards Gianluca
Would you be able to show how you would make a custom bicycle handlebar using a scanned image from clay imprints? I would like to make a carbon fiber handlebar with the finger indents.
Sure, I have written an entire SolidWorks tutorial about how to model a Chopper (including handlebars from a scanned image) in SolidWorks. Click here for more info: learnsolidworks.com/chopper
Couple questions 1. Can you convert from a surface to a solid? 2. What does the normal to profile really do for us? 3. When you used your guide curves, does the negate the three green dot issues from before?
1: Yes definitely! You can always make a solid from a surface modeling by “thickening” your surface model 2. It adds a Tangecy relation. If you use the Normal To Profile side of the surface as a Mirror Plane, you will get a smooth transition on the mirror line 3. Yes! :) Make sure to check LearnSolidWorks.com for more surface modeling videos.
Sorry to bother you again >.< I build something that looks similar to your example, but solidworks will not allow the "normal to profile" command. Everything works out well except the smooth edge after I mirror the parts. Do you habe any idea what went wrong? (It says that the command will not work with this guide curve because it might be ambigouos or it doesn't work with the profiles. Sorry, my solidworks is german so I hope you will understand my gibberish :D
Hi Serafinelly, thanks for your message. I am not sure what went wrong. If you send your SW model to info@learnsolidworks.com I will take a look at your model and see what went wrong. Also subsribe yourself to my newsletter to receive free SolidWorks eBooks and videos into your mailbox: www.yachttutorial.com
![How to model Sports Glasses in SOLIDWORKS? 🕶 [60-minute Surface Modeling Masterclass by Jan]](http://i.ytimg.com/vi/bVnL_QtYtIc/mqdefault.jpg)
One of the best narrated instructions I have seen for modeling instructions.
Thanks!! :)
InstaBlaster
One of the best video I have watched till date
Thanks!! 🙏🏼
Clear and straight to the point!
Awesome presentation!
Thanks Antonio! :)
Man, you really saved me, thanks!
Same thoughts as your students below, many thanks, excellent teaching and presentation skills.
You are very welcome! :)
Thank you, Help me a lot!
Thanks was a really great help! :)
Really the best tutorial for solidworks I have seen so far! I'm so thankful and happy that I found your video ^^
Thanks!! I appreciate it :)
You're welcome ^^ There are so many videos here that are a pain in the *** :D You did an awesome job!
Clear and simple... Simple to learn from it and go wild on your ideas! THKS! :)
You are very welcome! :)
nice video,very clearly explained with all possibilities covered.
Thanks! :)
beautiful voice.. would love to hear u teach me solidworks everyday
Thanks!! :)
Thank you very much for the tutorial.
Really Excellent Video!!!
Glad you liked it! :)
brilliant. Thks for this great video.
EXCELLENT! Saved me after struggling for a few hours on a project! Thanks!
You are very welcome! :)
Well done!
great video, very informative and clear. thanks very much
You are very welcome!
Vow. Very helpful. Thanks a lot
thank you, this video helped so much :)
good
Thank you.
Good day Sir
I have got a very complex loft that I am not able to solve.
It is the cowling of my airplane that I am trying to make it new style.
Would you be able to give me a help?
Of course I could forward the sketch and guide curves.
It is very complex!
Thanks
Regards
Gianluca
THANK YOU!!
Good
Would you be able to show how you would make a custom bicycle handlebar using a scanned image from clay imprints? I would like to make a carbon fiber handlebar with the finger indents.
Sure, I have written an entire SolidWorks tutorial about how to model a Chopper (including handlebars from a scanned image) in SolidWorks. Click here for more info: learnsolidworks.com/chopper
Couple questions
1. Can you convert from a surface to a solid?
2. What does the normal to profile really do for us?
3. When you used your guide curves, does the negate the three green dot issues from before?
1: Yes definitely! You can always make a solid from a surface modeling by “thickening” your surface model
2. It adds a Tangecy relation. If you use the Normal To Profile side of the surface as a Mirror Plane, you will get a smooth transition on the mirror line
3. Yes! :)
Make sure to check LearnSolidWorks.com for more surface modeling videos.
super subcribing you
thanks a looooooooooooot
Sorry to bother you again >.< I build something that looks similar to your example, but solidworks will not allow the "normal to profile" command. Everything works out well except the smooth edge after I mirror the parts. Do you habe any idea what went wrong? (It says that the command will not work with this guide curve because it might be ambigouos or it doesn't work with the profiles. Sorry, my solidworks is german so I hope you will understand my gibberish :D
Hi Serafinelly, thanks for your message. I am not sure what went wrong. If you send your SW model to info@learnsolidworks.com I will take a look at your model and see what went wrong. Also subsribe yourself to my newsletter to receive free SolidWorks eBooks and videos into your mailbox: www.yachttutorial.com
খুব ভাল
Hey i need yacht full drawing will u help me
nice
Thank jan =)
You are very welcome! :)