Beautiful PC, but I install in it black fans Arctic P14 pmw/pst, revision four, as powerful as Noctua but quieter! I say this because I have Noctua NF-A14 PWM fans, noisy even with LNA mounting, I replaced them all with fans from Arctic Cooling, P14 pmw/pst!
It depends on your CPU and GPU. The air cooler interacts with the graphics card temperature. Therefore, the hot air could stay in the PC case chamber if the exhaust fan is insufficient. If the heat is not exhausted properly, it's really not good. Maybe... the RTX 3060ti or 3070 would be enough for a rear exhaust fan. The better you use a good fan, the more effective it is. I hope this helps. Cheers!
Thanks for your comment! AIO is perfect but NH-U12A is also great for it if undervolted. Moreover, it depends on how much we use the 13700K power draw. Thanks a lot❤
Alright, I have a Pure Base 500DX with quite the strong airflow setup (1x Silent Wings Pro 4 140mm at the back set to 1300 RPM, 3x SWP4 120mm at the front set to 1500 RPM) with a NH-U12A cooler. Getting a 13700K on a Strix Z790-F soon. Also getting the Thermalright contact frame. Looks like the cooler is enough, which I'm glad about.
Thank you so much! Please, check this 03:39 Three exhaust fans are connected to a 3-to-1 splitter, two front fans to a 2-to-1 splitter, and the bottom fan is simply connected.
Beautiful build .did you find installing the cpu brace easy and easy to get the bolt pressure right I want to do it but worried about over or under tighting it
Hi! Thanks for ur comment! Well... pretty hard if it's your first time but definitely easy once you do man. Just slightly tighten bolts with your hands control torque, no worries! Please give it a try "Intel XTU" first before you apply it on MOBO, you can get the results easily. Good luck❤
@@SNAPSHOTREVIEW as an update I did do it was a lot easier than I thought and water cooler my PC same time I have the same CPU as the one in your videos I see temps around 25 to 30 on average
Hello there! Amazing build. Im getting 13700k as well and i already have DARK ROCK PRO 4, what do you think, should i get AIO, or undevolt 13700k and keep my be quiet?
Thanks for your comment! I guess the range of DARK ROCK PRO 4 is slightly similar to U12A and D15. Therefore, if you undervolt the 13700K, DARK ROCK PRO 4 might be okay under 200W power draw. I hope this helps ❤
Thank you so much! Well, if you undevolt and dont want to take any risks, air cooler is always better! Good enough for it. Perhaps you want to use the 13700k with all default values, AIO should be better! Hope this helps. Cheers!
Hi, Since in your build an air cooler can handle the 13700KF undervolted, so it is possible to easily handle normal 13700 (non K) with factory setting as well? Rightnow I'm planning to buy a normal 13700 and many people told me that heat between normal 13700 and 13700K is like heaven and hell. Some of my friends even claimed that may be normal air cooler is already enough, no need to buy hi tier cooler like Noctua or Dark rock pro. I work in architecture design/render-visualization field, so there will be a time when I need to render something and have my CPU run at high or 100% usage and in that moment I want CPU temp not more than 80-85c, is it possilble with normal air cooler or I need a hi tier one or even AIO? Thanks!
Hi! Thanks for your comment! I've checked some thermal data and I think the temperature range of both CPUs is almost the same if we talk about the maximum power draw. Based on Cinebench R23, the package power of the 13700 is around 240W. For using a normal air cooler, you should set the power limit surely. However, if you like to run it under high load frequently, maybe a big boy can be necessary. Anyway not much result data currently, we need to check more💜🖤 Cheers👍👍
@@SNAPSHOTREVIEW Hi, Thanks for answer!. Set the power limit mean limit PL2 like you did right? Rightnow I start to look in to those chonky big boy like Noctua D15 (I saw some people mention that D15 is hard to put inside normal case) or Thermalright PA120/Frost140 (I really like PA120 in you latest build!, all black with PA120 is sol sleek!). At first I was looking to Deepcool Ak620, however I saw a lot of people mention about weird humming noise, so rightnow I think may be Noctua or Thermalright is the best choice for me.
Hi! When I use an air cooler for the high TDP CPU, I usually apply the same value to PL1 and PL2 both. Yeah!! Those are really great stuff you mentioned! Thermalirght PA120 is expecially good for Intel 13th gen, not that big difference from D15 either, just difference in noise. Recommned the PA120! Cheers!
I'm glad you mentioned this, I have a 13700 non-K and I thought it was a defect in mine because it raised the temperatures so much compared to a 13700K, by default its original value in PL2 is 219W but it reaches 100º in a few seconds with the cinebench, I had to lower the PL2 to 170W, I have lost 3000 points but I keep the temperature below 90º, so I must think that the 13700 no K gets much hotter than a K
This is exactly the video I have been looking for. Nice shots and detailed info of a clean build. I currently have a NZXT H500 Black and Red with noctua chromax U12S cooler and case fans with red anti vibration pads. I really wanted to see how something similiar would look like in the flow version and I finally found a great example, the blackout build is sick too but maybe I'll bring the red cable bar from the H500 to the new case if I end up buying the H5 Flow. I need a case upgrade(and maybe a cpu cooler as well) because my new 5900x that I got on sale reaches high temps. Sadly everything is overpriced right now
Thank you so much! Wow! it's a professional story and I'm looking forward to your new build! Yeah, Absolutely agree with you man... Everything is getting more expensive and currencies even worse... Let me know when you build new one, I'm curious ❤
@@SNAPSHOTREVIEW yesterday I got my black H5 Flow and moved everything to it. CPU temps dropped 20°C and the Dark TG Panel looks very clean. On the front I have two Red fans which look really good through the mesh. I'm thinking about swapping the bottom fan with a less noisy pwm one
@@SNAPSHOTREVIEW I have had to lower it to 170W with the same cooler but with a non-K i7 13700 only touching the PL2, it doesn't let me touch anything else since it is not a K
Hey I'm really enjoy this build🤩and subscribed!! Can I repost this video on other website? Of course I will let the viewers know where is the video from.
Thank you so much! Thanks for your request but I would like to keep and play all my videos only in my channel. Therefore, I do not want reuploading or reposting in any other platform. Sorry I couldn't say the good news for you.
Thanks a lot 👍👍 Undervolting, it's really NOT that complicated if you use "OFFSET VALUE". 1. Prepare "HWINFO" it's the.. thermal monitoring programme 2. CPU stress tool - Cinebench or AIDA64 both are okay! this controls CPU to reach high load conditions. 3. BIOS - DEL key for getting in, find "Global Core SVID Voltage (Adaptive), Offset should be "minus", I guess you can start from "- 0.05 V" for the safe reason. That's it! You can change the offset value, logging windows, run CPU stress tool and monitor thermals on HWINFO simultaneously! You can find more information about how to undervolt (offset)! Cheers ❤
Hi! Thanks for your comments 🤎🖤 I used cables from a local supplier. However, most of the extension cables are quite similar. Therefore, it could be the same no matter what you use. I fixed GPU sag stuff but didn't include it in the video. Surely necessary to use it for long-term mounting 👍
Hi! Thanks a lot 👍👍 It's surely mandatory to undervolt core voltage for using an air cooler on the 13700KF. Cos it cannot cover thermals of it, especially Cinbench or AIDA64 which used the maximum power draw. However, it's pretty good in-game, of cause it depends on your games. Good idea! I will do a before and after comparison in the next air-cooled build video 👍
Looks neat. So I'm looking to build a pc rn. I'm not sure about going for 13600kf or 13700kf. Pared with the noctua NH-U12a. It will probably be in a torrent nano case so less space there. You think I will be fine for both cpu options here? For painting the entire picture I'm going for a 3070ti gpu. And i won't be doing overclocking.
Hi! Thank you so much :) I've never used the Torrent nano version but it seems to be okay with both CPUs and the NH-U12A. However, it depends on your graphics card, maybe you need to do undervolting CPU. If you want to go easy, I think the 13600K would be a better choice. Cheers!
@@SNAPSHOTREVIEW Thanks for your response. I also think the 13600 is going to be good enough. I do some occasional video editing and play games sometimes. So should be alright. Also means less power usage and heat. And if I can believe the benchmarks it's a pretty good cpu.
안녕하세요! 댓글 남겨주셔서 정말 감사합니다. 넵! 저역시 H5 FLOW 너무 이쁘고 좋습니다. 아하! H7 FLOW를 주문하셨군요. 보통 공랭 빌드로 갈때에 "후면 배기는 좀 풍량 좋은 쿨링팬, 상단 배기는 적절히 밸런스 좋은 쿨링 팬이 도움이 됩니다" 상단 배기 3개는 사실 공랭 빌드에 더 좋지 않아서 전면에 가까운 1개 팬은 제거하는게 더 좋습니다. 흡기는 많으면 많을 수록 좋아요. 대신 먼지가 엄청 많아지기 때문에 선택을 해주셔야 합니다. H7 FLOW면 140mm 쿨링 팬이 다 지원되므로 전면 3개 (혹은 중간으로 몰아서 2개), 상단 2개 (최대한 뒷쪽에 붙여서), 후면 1개면 충분합니다.
@@Be_Melodramatic 아하~ 첫번째 팬을 흡기로 놔두어도 괜찮을 것 같네요. 예전에 테스트해 본적이 있는데 큰 차이는 없었으나 램쿨링에 오히려 도움이 되었던 것 같아요. ㅎ 이미 7개 팬을 구매하셨으니 다양하게 장착하면서 벤치 테스트를 돌려보시면 답이 나올 것 같네요. 좋은 쿨링 팬 구매하셨네요 축하드려요!
I'm working with a case bigger than that and 6 years older with same fans and cooler and i reach 56-57 degree on the cpu and 67 on the gpu playing at 1040
Thanks for your comment! Those are not customer cables, you can find them with keywords like "Sleeved extension cables" also in Amazon ❤ Hope you find unique cables!
Hi! I fully understand that... Compared to the H5 Flow, the front panel is blocked so it's not good for cooling. If you use a high-power draw GPU or CPU, I think it would surely be better to buy the H5 Flow. I guess it depends on which PC parts you're using and how much power you use as well. Just bought the H5 Flow cos I'm interested in cooling more than looks. I hope this helps 💜💜
Such a beautiful build! And I love the way you present it all. I'm considering taking some of these parts for my upcoming first build, or straight up using this exact setup. I've been wanting the new i7, but read it couldn't be air cooled (which I'd prefer over liquid). And now this pops up! Was it more the fan setup or the fans themselves that allowed for proper cooling? And would heavy/prolonged rendering drastically change the temperatures?
Appreciate your comment! Thanks, Thanks! It's difficult to use in the default condition but works pretty well when we undervolt the i7. More or bigger cooling fans, better cooling up to a certain level but the noise level goes up. Depends on your satisfaction. Well, the thermals surely depend on the CPU's TDP during rendering time. Generally, 170~180W should be enough even air-cooled, I use Davinci Resolve and it's within 170W. I hope this helps.
That's a awesome build! I also got new 13700k with NH-U12A recently. How's the CPU temperature performance of yours? Normally it's about 42°C of my CPU. When I run cinebench r23 of multi, the score is only around 21000. I think it is lower than average and maybe some setting is wrong. By the way, my case is FD Meshify 2 compact, so maybe it's not case's problem.
Thank you so much! For the temperature you asked, please check 05:10 in that video. Cinebench R23 multi: 89°C on 203W power draw, I guess the score was over 30000. Your Cinebench score and temp are abnormal... check two stuff.. 1) I guess that there are very low values on PL1 PL2 power limits, you have to check this first man. (PL1 and PL2 should be over 200~210W at least) 2) Check the power draw when you run Cinebench R23, typically it should be over 200W in any cases... Maybe I can help you, please try and let me know 👍
@@SNAPSHOTREVIEW Thank you for answer. I turned of the Intel speed optimizer and only use motherbord's auto overclock. The Cinebench 23 multi core score increase to 28794. My idle temp is around 43 degree. It's my first time to build PC by myself. I guess maybe I did sth wrond when I set it up, so the temp is a little higher.
@@abc66301438 just make sure your XMP is running in gear 1 and do a static manual all core with static voltage for the best efficiency. Maybe an all core clock of 54 with a fixed voltage of maybe 1.27 and auto LLC. Hopefully this voltage works out okay but there's a possibility it might not be enough. Also, I wouldn't recommend using a motherboards auto OC/tuning settings.
넵! 감사합니다. 전면 라디로 가면 그래픽카드와 메모리 온도가 물론 높아져요. 낢시 선선하면 그럭저럭 괜찮을텐데 날씨더워지면 하단부 120쿨러로 다 커버하기 쉽지 않을꺼에요. 물론 사용하시는 그래픽카드에 따라 잘라집니다. 전면라디가 필수라면 배기쪽에 특히 신경을 많이쓰시고 램 방열판 정도만 해주시면 될듯합니다. 도움이되셨길바랍니다❤
Dang, everything just disappeared behind that tinted glass. You might have as well used the regular aluminum case, no point in glass panels when nothing can bee seen for a feet away ..
Good point! I guess glass panels have a lot of options and surely we can see inside with an RGB strip. But it's not the right answer for everyone, so I agree with you ❤❤
There is a point of glass even if you don't use it to show off guts. I have meshify 2 and I keep my box under table where I can not see anything under glass, BUT every month I check with my phone light through glass if it's time to clean dust. : )
Not everyone wants to risk water cooling and a good air cooler like this Noctua can do a fine job. Plus the Noctua U12A Chromax is pretty as heck to look at compared to any AIO. Custom water cooling can look nice, but there is also a risk.
Beautiful PC, but I install in it black fans Arctic P14 pmw/pst, revision four, as powerful as Noctua but quieter! I say this because I have Noctua NF-A14 PWM fans, noisy even with LNA mounting, I replaced them all with fans from Arctic Cooling, P14 pmw/pst!
i want this exact build but with a 7900gre and ryzen 7
man noctua fans are damn expensive.
What does this video mean, using a liquid cooler is better than a fan?
Great demonstration and build! I have this case aswell with similar cooling components, great flow and little noise :)
Thank you so much!!
I completely agree with everything you mentioned!
can you tell me what is the room temperature, GPU, and CPU temperature at idle? Thank you..
Hi! You can check the things you asked here - 05:10 !!
Cheers👍👍
Hey! Could you pls drop the music which are used here?🎵🎼🎹
Man... perfect build 👍👍👍 this video makes me decide to go with the air-cooled 13700K! Better thermals than I expected!
Thanks for your comment! I'm so happy you said that.
I hope you build a great PC 🤞
@@SNAPSHOTREVIEW Thanks, man! I hope your channel is growing more👍
flow or elite h5 which is better to choose?
Both are good cases, but I recommend Flow!
Hello is there a difference between the Noctua NF-A12x25 Chromax fans and the NF-F12 fans,thanks you
Yes, the two fans are completely different! At the moment, the Noctua NF-A12x25 is the best 120mm fan I'd like to recommend. Definitely go for it!
Do we need the top exhaust fan when a good air cooler(Deepcool Ak500) insatalled?? please reply
It depends on your CPU and GPU.
The air cooler interacts with the graphics card temperature.
Therefore, the hot air could stay in the PC case chamber if the exhaust fan is insufficient. If the heat is not exhausted properly, it's really not good.
Maybe... the RTX 3060ti or 3070 would be enough for a rear exhaust fan.
The better you use a good fan, the more effective it is.
I hope this helps.
Cheers!
@@SNAPSHOTREVIEW oo thanks btw i am going to use 7600x with rtx 3060/ti
Hi Noctua NH-U12A you can with him i7 13700k?
Thanks for your comment!
AIO is perfect but NH-U12A is also great for it if undervolted.
Moreover, it depends on how much we use the 13700K power draw.
Thanks a lot❤
For anyone using this as a build guide and want to save some money I would get a 12400f or 13400f because those cpus don’t bottleneck the gpu
Is this air cooler enough for 13700k ? 🤔
Hi! It depends on the power draw you use and undervolting.
Noctua U12A works pretty well under 200W as the maximum power draw.
Cheers!
녹투아의 원래 로드맵 대로라면 이번달안에 신형 140mm 팬이 나왔어야 하는데 말이죠... 뭐 언제나의 녹투아처럼 또 밀릴게 뻔하단 생각이 들긴 합니다만... 대체 언제 나올까요 A14x25...
안녕하세요~ 저도 녹투아를 엄청 좋아해서 140mm NF 신형 팬 기다리고 있습니다.
오늘 날짜 로드맵보니 업데이트 내용은 없네요.
아무래도 조금 더 기다려봐야 할 것 같습니다.
그럼 함께 기다려요.
Alright, I have a Pure Base 500DX with quite the strong airflow setup (1x Silent Wings Pro 4 140mm at the back set to 1300 RPM, 3x SWP4 120mm at the front set to 1500 RPM) with a NH-U12A cooler. Getting a 13700K on a Strix Z790-F soon. Also getting the Thermalright contact frame. Looks like the cooler is enough, which I'm glad about.
Oh wow~ Thanks for your awesome build information!
I will try Silent Wings Pro 4 somday :)
Thanks!
@@SNAPSHOTREVIEW They are honestly the best fans on the market.
Oh really? I'm really looking forward to it!
Awesome build! I agree, you have great editing skill as mentioned from your other viewers.
Thank you so much! Appreciate your comments ❤❤
Nice build. Did you use 3 fan splitters for the 6 case fans?
Thank you so much!
Please, check this 03:39
Three exhaust fans are connected to a 3-to-1 splitter, two front fans to a 2-to-1 splitter, and the bottom fan is simply connected.
@@SNAPSHOTREVIEW Ah that makes a lot of sense. Thank you!
Beautiful build .did you find installing the cpu brace easy and easy to get the bolt pressure right I want to do it but worried about over or under tighting it
Hi! Thanks for ur comment!
Well... pretty hard if it's your first time but definitely easy once you do man.
Just slightly tighten bolts with your hands control torque, no worries!
Please give it a try "Intel XTU" first before you apply it on MOBO, you can get the results easily.
Good luck❤
@@SNAPSHOTREVIEW as an update I did do it was a lot easier than I thought and water cooler my PC same time I have the same CPU as the one in your videos I see temps around 25 to 30 on average
I bet you one potato chip that with the two top fan as intake both CPU & GPU temps will drop. This case love it maybe because of the bottom fan.
Thanks for your opinion!
That's right! I also like that bottom fan ❤
Hello there! Amazing build. Im getting 13700k as well and i already have DARK ROCK PRO 4, what do you think, should i get AIO, or undevolt 13700k and keep my be quiet?
Thanks for your comment!
I guess the range of DARK ROCK PRO 4 is slightly similar to U12A and D15.
Therefore, if you undervolt the 13700K, DARK ROCK PRO 4 might be okay under 200W power draw.
I hope this helps ❤
Love the build i have the same 13700k but i dont know if the noctua cooler you used its enough for it or should i go AIO?
Thank you so much!
Well, if you undevolt and dont want to take any risks, air cooler is always better! Good enough for it.
Perhaps you want to use the 13700k with all default values, AIO should be better!
Hope this helps. Cheers!
If that was a vessel screwdriver, you've good taste sir! Thanks for another great build video. As always!
Oh thank you so much!
역시 영상 엄청 좋네요 ㅎ nzxt에서 케이스 새로 나왓네요 케갈이 함 해야하는데 스냅샷님 영상 볼때마다 뽐뿌가 ㅎㅎ
앗! 댓글 감사합니다~
네 지난주에 지난주에 나왔네요. 매우 좋습니다.
기회가 되신다면 적극 추천드려요 ~~❤
논rgb 블랙은 매쉬버전도 멋지네요
엘리트vs플로우 ㅎㅎ
점점 영상퀄리티가 좋아지네요
넵! 블랙 감성이 요즘 고급지고 멋지다고 생각해서 RGB 없는 빌드를 자주 하게 되네요.
좋은 말씀 정말 감사 드리며 자주 자주 놀러오셔요!❤
Hi, Since in your build an air cooler can handle the 13700KF undervolted, so it is possible to easily handle normal 13700 (non K) with factory setting as well?
Rightnow I'm planning to buy a normal 13700 and many people told me that heat between normal 13700 and 13700K is like heaven and hell. Some of my friends even claimed that may be normal air cooler is already enough, no need to buy hi tier cooler like Noctua or Dark rock pro.
I work in architecture design/render-visualization field, so there will be a time when I need to render something and have my CPU run at high or 100% usage and in that moment I want CPU temp not more than 80-85c, is it possilble with normal air cooler or I need a hi tier one or even AIO?
Thanks!
Hi! Thanks for your comment!
I've checked some thermal data and I think the temperature range of both CPUs is almost the same if we talk about the maximum power draw.
Based on Cinebench R23, the package power of the 13700 is around 240W.
For using a normal air cooler, you should set the power limit surely.
However, if you like to run it under high load frequently, maybe a big boy can be necessary. Anyway not much result data currently, we need to check more💜🖤
Cheers👍👍
@@SNAPSHOTREVIEW Hi, Thanks for answer!.
Set the power limit mean limit PL2 like you did right?
Rightnow I start to look in to those chonky big boy like Noctua D15 (I saw some people mention that D15 is hard to put inside normal case) or Thermalright PA120/Frost140 (I really like PA120 in you latest build!, all black with PA120 is sol sleek!).
At first I was looking to Deepcool Ak620, however I saw a lot of people mention about weird humming noise, so rightnow I think may be Noctua or Thermalright is the best choice for me.
Hi! When I use an air cooler for the high TDP CPU, I usually apply the same value to PL1 and PL2 both.
Yeah!! Those are really great stuff you mentioned! Thermalirght PA120 is expecially good for Intel 13th gen, not that big difference from D15 either, just difference in noise. Recommned the PA120!
Cheers!
I'm glad you mentioned this, I have a 13700 non-K and I thought it was a defect in mine because it raised the temperatures so much compared to a 13700K, by default its original value in PL2 is 219W but it reaches 100º in a few seconds with the cinebench, I had to lower the PL2 to 170W, I have lost 3000 points but I keep the temperature below 90º, so I must think that the 13700 no K gets much hotter than a K
Подскажите пожалуйста переходник на видеокарту ?
Пожалуйста, перейдите по этой ссылке.
bit.ly/46rLRBN
Спасибо за просмотр видео!
This is exactly the video I have been looking for. Nice shots and detailed info of a clean build. I currently have a NZXT H500 Black and Red with noctua chromax U12S cooler and case fans with red anti vibration pads. I really wanted to see how something similiar would look like in the flow version and I finally found a great example, the blackout build is sick too but maybe I'll bring the red cable bar from the H500 to the new case if I end up buying the H5 Flow. I need a case upgrade(and maybe a cpu cooler as well) because my new 5900x that I got on sale reaches high temps. Sadly everything is overpriced right now
Thank you so much!
Wow! it's a professional story and I'm looking forward to your new build!
Yeah, Absolutely agree with you man...
Everything is getting more expensive and currencies even worse...
Let me know when you build new one, I'm curious ❤
@@SNAPSHOTREVIEW yesterday I got my black H5 Flow and moved everything to it. CPU temps dropped 20°C and the Dark TG Panel looks very clean. On the front I have two Red fans which look really good through the mesh. I'm thinking about swapping the bottom fan with a less noisy pwm one
@@TheDeathstar2000Wow! Well done! That sounds awesome! Your idea about the fan swapping is also perfect, PWM fans are always good for noise.
녹투아 12!!
Nh-D15로 진행했다면 언더 볼팅
안해도 괜찮았을까요
안녕하세여! 벤치테스트 목적이 아니면 u12a, d15, pa120 모두 언더볼팅없이도 괜찮아요! 13세대기준 200w 소비전력 부근 전후로는 모두 괜찮습니다!
@@SNAPSHOTREVIEW 답변에
감사드립니다!
@@SNAPSHOTREVIEW I have had to lower it to 170W with the same cooler but with a non-K i7 13700 only touching the PL2, it doesn't let me touch anything else since it is not a K
Hey I'm really enjoy this build🤩and subscribed!!
Can I repost this video on other website? Of course I will let the viewers know where is the video from.
Thank you so much!
Thanks for your request but I would like to keep and play all my videos only in my channel.
Therefore, I do not want reuploading or reposting in any other platform.
Sorry I couldn't say the good news for you.
awesome build ! I am considering the same cpu cooler combo \ how complicated is undervolting?
Thanks a lot 👍👍
Undervolting, it's really NOT that complicated if you use "OFFSET VALUE".
1. Prepare "HWINFO" it's the.. thermal monitoring programme
2. CPU stress tool - Cinebench or AIDA64 both are okay! this controls CPU to reach high load conditions.
3. BIOS - DEL key for getting in, find "Global Core SVID Voltage (Adaptive), Offset should be "minus", I guess you can start from "- 0.05 V" for the safe reason.
That's it! You can change the offset value, logging windows, run CPU stress tool and monitor thermals on HWINFO simultaneously!
You can find more information about how to undervolt (offset)!
Cheers ❤
영상 잘봤습니다. 13700k 상단 240수랭 장착해도 괜찮을까요? 하도 뜨겁다 말이많다보니 공랭은 생각지도 못했는데 이 영상보니 해보고싶다는 생각이드네요. 감사합니다.
안녕하세요^^
13700k로 게임정도하시면 240 수랭으로 가셔도 충분해요! 대신 글카 발열이 높다면 케이스 쿨링 조금 신경쓰면 더 좋아요. z690이나 z790 보드로 가시면 약간 언더볼팅해줘도 좋고 b보드로 가시면 load line calibration 값정도만 조절해도 충분합니다! 댓글 감사드려요!
@@SNAPSHOTREVIEW 감사합니다
What is that cover you put in the middle of the u12a? Mine didn’t come with anything like that.
Thanks for your comment👍👍
It's the heatsink cover and you have to buy it additionally.
Check this link:
noctua.at/en/na-hc4-chromax-black
Cheers!
What is thqt thing over the cpu cooler?
Please refer to the link:
shorturl.at/sWKUE
No like on the air cooler that cover
Beauty build. Nothing more to say. This is perfect!
Thank you so much!!
Glad you liked it man❤
Hi which cable extensions did you use and did you need to use a graphics card sag bracket ?
Hi! Thanks for your comments 🤎🖤
I used cables from a local supplier. However, most of the extension cables are quite similar.
Therefore, it could be the same no matter what you use.
I fixed GPU sag stuff but didn't include it in the video.
Surely necessary to use it for long-term mounting 👍
Nice build
Thank you so much!
What are the benchmarks before and after power limits were changed? Thank you and great build btw!
Hi! Thanks a lot 👍👍
It's surely mandatory to undervolt core voltage for using an air cooler on the 13700KF.
Cos it cannot cover thermals of it, especially Cinbench or AIDA64 which used the maximum power draw.
However, it's pretty good in-game, of cause it depends on your games.
Good idea! I will do a before and after comparison in the next air-cooled build video 👍
Man your build are awesome 😎
Please build with deepcool ch 370 black 🖤
):newsubscriber
Thank you so much! I'm really happy you enjoyed it ❤❤
Sure! DeepCool CH370 looks nice, I will try it if I get a chance👍👍👍
@@SNAPSHOTREVIEW thanks, take love from Bangladesh 🇧🇩
@@sifatmahmud.me10 Oh thanks! Nice evening ❤
Nice build 👌
Got the 13700K as well, but using the H7 Flow since I need space for the STRIX 4090 😆
Thanks a lot!
WoWoW! RTX4090! Jealous!
Yeah, H7 Flow is one of the best PC cases which came out 2022!
Looks neat. So I'm looking to build a pc rn. I'm not sure about going for 13600kf or 13700kf. Pared with the noctua NH-U12a. It will probably be in a torrent nano case so less space there. You think I will be fine for both cpu options here? For painting the entire picture I'm going for a 3070ti gpu. And i won't be doing overclocking.
Hi! Thank you so much :)
I've never used the Torrent nano version but it seems to be okay with both CPUs and the NH-U12A. However, it depends on your graphics card, maybe you need to do undervolting CPU. If you want to go easy, I think the 13600K would be a better choice.
Cheers!
@@SNAPSHOTREVIEW Thanks for your response. I also think the 13600 is going to be good enough. I do some occasional video editing and play games sometimes. So should be alright. Also means less power usage and heat. And if I can believe the benchmarks it's a pretty good cpu.
와우... 벌써 12번째 보는건데요... 너무 이뻐요.
지금 파워가 1600w 짜리라서 H5 flow 는 무리고, H7 flow 를 주문한 상태인데요.
H7 flow는 상단 배기팬 3개로 해도 괜찮을까요?
아니면 흡기쪽 하나 빼고 2개만 추천하시나요?
안녕하세요! 댓글 남겨주셔서 정말 감사합니다.
넵! 저역시 H5 FLOW 너무 이쁘고 좋습니다. 아하! H7 FLOW를 주문하셨군요.
보통 공랭 빌드로 갈때에 "후면 배기는 좀 풍량 좋은 쿨링팬, 상단 배기는 적절히 밸런스 좋은 쿨링 팬이 도움이 됩니다"
상단 배기 3개는 사실 공랭 빌드에 더 좋지 않아서 전면에 가까운 1개 팬은 제거하는게 더 좋습니다.
흡기는 많으면 많을 수록 좋아요. 대신 먼지가 엄청 많아지기 때문에 선택을 해주셔야 합니다.
H7 FLOW면 140mm 쿨링 팬이 다 지원되므로 전면 3개 (혹은 중간으로 몰아서 2개), 상단 2개 (최대한 뒷쪽에 붙여서), 후면 1개면 충분합니다.
@@SNAPSHOTREVIEW 음... 녹투아 a-12×25크로맥스로 7개 주문했는데요... 전면 3개 흡기, 후면 배기, 상단 2개는 배기, 전면가까운 한개는 흡기 하면 어떨까요?
@@Be_Melodramatic 아하~ 첫번째 팬을 흡기로 놔두어도 괜찮을 것 같네요.
예전에 테스트해 본적이 있는데 큰 차이는 없었으나 램쿨링에 오히려 도움이 되었던 것 같아요. ㅎ
이미 7개 팬을 구매하셨으니 다양하게 장착하면서 벤치 테스트를 돌려보시면 답이 나올 것 같네요.
좋은 쿨링 팬 구매하셨네요 축하드려요!
@@SNAPSHOTREVIEW 답변 감사드립니다, 결론적으로는 전면쪽 상단 팬 하나 안다는걸로 결정했네요 ㅠㅠ
I'm working with a case bigger than that and 6 years older with same fans and cooler and i reach 56-57 degree on the cpu and 67 on the gpu playing at 1040
Thanks for your comment!
Wow! Great Job 👍👍I'm curious about the result of your PC build.
Cheers ❤
@@SNAPSHOTREVIEW i used 5 Noctua NF-P12 redux-1700 PWM
3 for incoming flux and 2 for the outcoming on an old Cooler Master MasterBox 5T
@@Bulzack Thanks for your info! Have a nice weekend ❤
beautiful dark build. this man put alot of money on coolers, gj with the results
Oh thank you so much!
Black builds are always great looking
Yeah! Absolutely agree with you man! I do love black stuff a lot❤
With a Little white led Stripe its 100% better
Awesome build as always! Love the part where you transitioned from no covers to fully covered. Keep it up!!
Appreciate your support as always, the pleasure was all mine. ❤❤
Yeah! I do love that part you spoke and going to try more next one!
I just love the stealth black builds
Oh, thank you so much my friend!
May i know if the cables are custom cables? I find the wires really unique specially the GPU wires
Thanks for your comment!
Those are not customer cables, you can find them with keywords like "Sleeved extension cables" also in Amazon ❤
Hope you find unique cables!
@@SNAPSHOTREVIEW oooh thanks. This actually helps a lot in considering the position of the 8 pin connectors to the gpu and how thy are installed
This is actually quite reassuring. Just ordered a flow 5 case with the Noctua NH-U12A and was concerned wasn't going to fit! Looks like I'll be ok
Thanks for watching!
I appreciate you sharing the information 👍👍
Hope you have a great PC build!
How're the temps?
@Sayantan Bose me? Pretty decent. Mainly play wow on it atm, full graphics. Getting 65 to 70 degrees Celsius. 1 gou monitor goes as high as 82 though
Nice, thanks for sharing.
Thank you so much my friend!
I appreciate your comments, AWESOME!
Ordered this thing yesterday. Can't wait to build in it
Oh!! That's an excellent choice ever!
Hope you build the greatest PC ❤
How much for this build ?
Thanks for your comment!
Well, Not sure about the exact price but I guess it costs around 2000 USD.
Cheers 👍👍
sick build mate! great editing skills, you‘ve improved a lot my friend!
Thanks bro! Appreciate your support always ❤
I’m planning buy the elite but im too scared of regretting it i dont want it to blow up
they said the airflow isnt good for h5 elite?? not sure
Hi! I fully understand that...
Compared to the H5 Flow, the front panel is blocked so it's not good for cooling.
If you use a high-power draw GPU or CPU, I think it would surely be better to buy the H5 Flow.
I guess it depends on which PC parts you're using and how much power you use as well.
Just bought the H5 Flow cos I'm interested in cooling more than looks.
I hope this helps 💜💜
@@SNAPSHOTREVIEW thank you for this! i think im gonna settle with fractal design torrent
으아 영상볼때마다 U12A 마렵습니다!!
오~ 안녕하세요!
네네 U12A 크로맥스 너무너무 좋습니다.
요즘 가격이 환률 때문인지 많이 오르긴했네요.
@@SNAPSHOTREVIEW 3열 수랭쿨러랑 맞먹는 가격이네요 ㅋㅋ; 이쁜 커버까지하면 어후.. 근데도 탐납니다..
@@DalraeMyo 네네! 녹투아는 늘 가격때매 망설여지는것 같습니다. 그래도 한번 사놓음 두고두고 쓸수있어서 나중 생각하면 늘 옳은것 같아요 :)
Clean AF 👍
Thank you so much! Perfect desccription ❤
@@SNAPSHOTREVIEW i hope sometime you'll remake this concept with ITX case 👍
Such a beautiful build! And I love the way you present it all. I'm considering taking some of these parts for my upcoming first build, or straight up using this exact setup. I've been wanting the new i7, but read it couldn't be air cooled (which I'd prefer over liquid). And now this pops up! Was it more the fan setup or the fans themselves that allowed for proper cooling? And would heavy/prolonged rendering drastically change the temperatures?
Appreciate your comment! Thanks, Thanks!
It's difficult to use in the default condition but works pretty well when we undervolt the i7.
More or bigger cooling fans, better cooling up to a certain level but the noise level goes up.
Depends on your satisfaction.
Well, the thermals surely depend on the CPU's TDP during rendering time.
Generally, 170~180W should be enough even air-cooled, I use Davinci Resolve and it's within 170W.
I hope this helps.
@@SNAPSHOTREVIEW Awesome! Thank you very much for the reply!
beautiful build❤
Oh! Thank you so much!
I'm so glad you liked it 👍
That's a awesome build! I also got new 13700k with NH-U12A recently. How's the CPU temperature performance of yours? Normally it's about 42°C of my CPU. When I run cinebench r23 of multi, the score is only around 21000. I think it is lower than average and maybe some setting is wrong. By the way, my case is FD Meshify 2 compact, so maybe it's not case's problem.
Thank you so much!
For the temperature you asked, please check 05:10 in that video.
Cinebench R23 multi: 89°C on 203W power draw, I guess the score was over 30000.
Your Cinebench score and temp are abnormal... check two stuff..
1) I guess that there are very low values on PL1 PL2 power limits, you have to check this first man. (PL1 and PL2 should be over 200~210W at least)
2) Check the power draw when you run Cinebench R23, typically it should be over 200W in any cases...
Maybe I can help you, please try and let me know 👍
@@SNAPSHOTREVIEW Thank you for answer. I turned of the Intel speed optimizer and only use motherbord's auto overclock. The Cinebench 23 multi core score increase to 28794. My idle temp is around 43 degree. It's my first time to build PC by myself. I guess maybe I did sth wrond when I set it up, so the temp is a little higher.
@@abc66301438 Estimated what motherboard and ram do you put in your cpu?
@@GameplaysNekoBravoCl Z690 AORUS ELITE DDR4 and T-Force Vulcan Z 16GBx2 DDR4-3600
@@abc66301438 just make sure your XMP is running in gear 1 and do a static manual all core with static voltage for the best efficiency. Maybe an all core clock of 54 with a fixed voltage of maybe 1.27 and auto LLC. Hopefully this voltage works out okay but there's a possibility it might not be enough. Also, I wouldn't recommend using a motherboards auto OC/tuning settings.
영상 찍을때는 조금은 풀샷
안녕하세요~ 작년까지 작은 공간에서 작업해서 풀샷은 어려웠어요~ 최근 영상 보시면, 대부분 전체샷 위주로 작업합니다.
영상 감사합니다. 여쭤보고 싶은 게 있는데요~ 280전면 수냉 구성했을 때 아래쪽 팬 하나로는 케이스 내부가 많이 뜨거울까요? 똑같이 137k 이며, cpu오버클럭은 생각 없습니다. 다만 램 오버 6000까지는 넣고 싶은 데 무리일까요?
넵! 감사합니다. 전면 라디로 가면 그래픽카드와 메모리 온도가 물론 높아져요. 낢시 선선하면 그럭저럭 괜찮을텐데 날씨더워지면 하단부 120쿨러로 다 커버하기 쉽지 않을꺼에요. 물론 사용하시는 그래픽카드에 따라 잘라집니다.
전면라디가 필수라면 배기쪽에 특히 신경을 많이쓰시고 램 방열판 정도만 해주시면 될듯합니다.
도움이되셨길바랍니다❤
@@SNAPSHOTREVIEW 답변 감사합니다!! 램은 xmp만 적용할 거라 방열판 있는 걸로 끼울 생각이구요 글카는 3060 입니다. 주 목적은 어도비 위주 작업입니다. 서브로 게임을 하는데 배그이상급은 안하는 상황입니다
@@bhk11743060 정도면 h5 flow 전면 라디로 가도 충분합니다^^ 안심하시고 쓰셔도 좋아요 ㅂ
@@SNAPSHOTREVIEW 감사합니다!!
Very nice man, it looks beautiful. I love the Noctua Chromax fans and coolers.
Oh thanks for your comments❤
Glad you liked it!
슬리빙 케이블 정보좀 알 수 있을까요? 특히 그래픽카드쪽에 저건 뭔가요 신기하네요 정보 알려주시면 감사하겠습니다!
안녕하세요^^
슬리빙은 몬스타기어 케이블입니다. 좀 뻣뻣하긴한데 각잡을때 좋아요.
그래픽카드는 180도 전원젠더인데 알리에서 여러개 구매했어요.
댓글 달아주셔서 감사드리고 참고 부탁드려요❤
와 영상퀄 개오지네요 영상에서 간지가 흐름니다 ㅎ 녹투아 사고싶네요
네 ㅎㅎ 감사합니다.
녹투아 쿨링 팬 정말 좋습니다.
고급스러운 감성도 있고 성능 소음 정말 좋아요!
기회가 되신다면 한번 사용해 보시는 것도 좋을 것 같네요.
맛있는 음식을 먹으면 깔끔하다고 표현하는데 이 영상도 참 깔끔하다라고 말할 수 있다~~
저녁 일찍 먹어서 배고프던 참인데 ㅋ 좋은 말씀 정말 감사합니다.!
알람 떠서 봤는데 정말 좋습니다 great!
안녕하세요! 기억해주시고 찾아와 주셔서 정말 감사합니다.
@@SNAPSHOTREVIEW 네 자주봬요 감사해요
Dang, everything just disappeared behind that tinted glass. You might have as well used the regular aluminum case, no point in glass panels when nothing can bee seen for a feet away ..
Good point!
I guess glass panels have a lot of options and surely we can see inside with an RGB strip.
But it's not the right answer for everyone, so I agree with you ❤❤
There is a point of glass even if you don't use it to show off guts. I have meshify 2 and I keep my box under table where I can not see anything under glass, BUT every month I check with my phone light through glass if it's time to clean dust. : )
That’s the point it’s beautiful
Air cooler on 13700k ?🤣🤣
Hi! Thanks for your comment❤
An air cooler is tight by default but it works pretty well if we undervolt the 13700k.
Cheers
Not everyone wants to risk water cooling and a good air cooler like this Noctua can do a fine job. Plus the Noctua U12A Chromax is pretty as heck to look at compared to any AIO. Custom water cooling can look nice, but there is also a risk.
Yeah, what's the problem?
Yeah. For your information, Noctua NH-U12A matches and even outperforms many water-coolers in many cases.
Less noise, no risks, better thermals.