You're a lifesaver! My DC24 lost suction a few years ago and I watched several videos trying to find the clog, but everything looked clear. It sat in storage for a few years because I didn't want to throw away a $400 vacuum. I decided to try to fix it again today and almost gave up again, but watched your video last. Took that little hose off and found a bottle cap inside blocking the suction. Everything works perfectly again! Thank you!
Thank you so very much ...I have a DC24 ..Had no suction ..did everything the internet told me to do and was stumped for sure..came across your video and it worked !!! The hose was clogged with a hair clip and that had gathered up dust and dirt. I cannot thank you enough..My DC24 is working like new !
Brilliant. Not sure what was clogging. The vacuum worked when using it normally but no suction in the hose. The little hose came off fairly easily. BINGO! All unclogged and works lovely. So thrilled, thanks very much for posting this.
I had a feeling that hose was the issue! I got a knife, and wiggled it off, put the knife down the tube, and wiggled it as well, and I dislodged a bottle cap from months ago! 🙄😂
THANK YOU! Just had it shipped to another province for repair, and it still didn't work. Watched your vid, found a small piece of metal in the hose,. Fixed! Awesome! You are awesome!
Thanks, very helpful. On my Dyson, the clog extended into the lower hose as well. You can pry that off from one side and use your finger or a screwdriver to clear the clog. The vacuum is working like the day we bought it eight years ago. Thanks again for this video.
Thank you! My problem was not that that hose was clogged, but the one right below it, attached to the brush was not attached completely, losing the seal and hence, suction. Working like new now! Thanks again for your problem solving!
Thank you so much watched your video after giving up on the Dyson web site and it did the trick, found a small plastic curtain hook plus a load of fluff.Its working perfectly thanks to you .
Thanks, found our issue. We could not take the whole hose off but with moving the lever stuff that was blocking the hose fell out. Got to wait for the filters to dry to make sure all the suction is back!
OMG you are AMAZING!!!!!! I've done everything and then I came across your video. Thank you for saving me money with having to go and buy a new vacuum!!!!!!
Just like you, I was ready to chuck mine out. I cleaned everything, check everything. Thank you so much for your video; sure enough, there was a massive amount of compacted fluff stuck in the hose.
You are an ANGEL!!! I finally found this video after MONTHS of frustration, anger, and despair. 😣 Thank you SO much for posting the video, my lifelong dream of being handy, is no longer over, before it even had a chance to begin. 😁
Ha! Thank you so very much. Saved me a few pounds calling out the Dyson man...only for him to spend less than five minutes to fix it...only took me a couple of mins...bottle cap...i don't even remember vacuuming it up! Yippeeee...thanks again!
Finally!! Thank you sir! I watched all sorts of videos and couldn’t find the issue. Went to the store to buy a new one and they were out so I tried again. You saved me $400!
Thank you so much. I couldn’t figure out how to get to that hose. I pretty much figured that it was the problem, but I couldn’t get it out. You saved the day!
Excellent. I was thinking about replacing mine as well. Same tubing where there was a bunch of blockage. Cleared it out and works like new. Thanks for the Video
I AGREE! I tried all the other obvious solutions and was about to buy a new vacuum when I found your post. I took off that little hose and found a clog that went all the way down into the ball support. This should get top billing!!!
My guy I was literally literally ready to throw it in the trash I'm staring at the recycle bin right now cause it keeps doing that noise but hopefully this works.
Just to add there is another hose between the head and the Y as described in the video. That's where I found my blockage. A piece of torn cardboard with the Dog and cat hair to finish it off.
You're a lifesaver! My DC24 lost suction a few years ago and I watched several videos trying to find the clog, but everything looked clear. It sat in storage for a few years because I didn't want to throw away a $400 vacuum. I decided to try to fix it again today and almost gave up again, but watched your video last. Took that little hose off and found a bottle cap inside blocking the suction. Everything works perfectly again! Thank you!
me too!
Thank you so very much ...I have a DC24 ..Had no suction ..did everything the internet told me to do and was stumped for sure..came across your video and it worked !!! The hose was clogged with a hair clip and that had gathered up dust and dirt. I cannot thank you enough..My DC24 is working like new !
Brilliant. Not sure what was clogging. The vacuum worked when using it normally but no suction in the hose. The little hose came off fairly easily. BINGO! All unclogged and works lovely. So thrilled, thanks very much for posting this.
I had a feeling that hose was the issue! I got a knife, and wiggled it off, put the knife down the tube, and wiggled it as well, and I dislodged a bottle cap from months ago! 🙄😂
Thank you! That little hose was totally clogged! I am so happy I found your fix 😊
THANK YOU! Just had it shipped to another province for repair, and it still didn't work. Watched your vid, found a small piece of metal in the hose,. Fixed! Awesome! You are awesome!
Thanks, very helpful. On my Dyson, the clog extended into the lower hose as well. You can pry that off from one side and use your finger or a screwdriver to clear the clog. The vacuum is working like the day we bought it eight years ago. Thanks again for this video.
Thank you! My problem was not that that hose was clogged, but the one right below it, attached to the brush was not attached completely, losing the seal and hence, suction. Working like new now! Thanks again for your problem solving!
FINALLY the only video that shows how to fix this!!!!!
Thank you so much watched your video after giving up on the Dyson web site and it did the trick, found a small plastic curtain hook plus a load of fluff.Its working perfectly thanks to you .
Thanks, found our issue. We could not take the whole hose off but with moving the lever stuff that was blocking the hose fell out. Got to wait for the filters to dry to make sure all the suction is back!
Awesome! We had the same issue and after watching your video I found a little plastic toy with a big dust clog. All clear now! Thank you!!!
OMG you are AMAZING!!!!!! I've done everything and then I came across your video. Thank you for saving me money with having to go and buy a new vacuum!!!!!!
Just like you, I was ready to chuck mine out. I cleaned everything, check everything. Thank you so much for your video; sure enough, there was a massive amount of compacted fluff stuck in the hose.
You are an ANGEL!!! I finally found this video after MONTHS of frustration, anger, and despair. 😣 Thank you SO much for posting the video, my lifelong dream of being handy, is no longer over, before it even had a chance to begin. 😁
Ha! Thank you so very much. Saved me a few pounds calling out the Dyson man...only for him to spend less than five minutes to fix it...only took me a couple of mins...bottle cap...i don't even remember vacuuming it up! Yippeeee...thanks again!
Absolutely the only video that addresses this particular issue that was the source of my vacuum's clog.
Many thanks for posting.
Thank you I've just fixed my DC24 it now has amazing suction, it was also blocked right down to the roller bar, your advice helped me fix this too
Finally!! Thank you sir! I watched all sorts of videos and couldn’t find the issue. Went to the store to buy a new one and they were out so I tried again. You saved me $400!
Thank you so much. I couldn’t figure out how to get to that hose. I pretty much figured that it was the problem, but I couldn’t get it out. You saved the day!
Holy shit, it didn't seem to be the problem initially but it actually fixed it. you the man! THanks, you saved another Dyson from being thrown away!
Lucky for me, yours was the first video that came up, and bingo: a tissue! Thank you so much!
Ay man, you have saved my dyson a few times with this video. You'd man, much respect
Thank you! First video I watched and that's exactly where the clog was - thanks!
Thank you good sir! I just cleaned the small hose out and that did the trick! My Dyson has the suction back. Very much appreciated.
Thank you so much for posting! This did the trick for me. God send! 🙏🏽
Thanks a lot! Saved me from buying a new Dyson. 6 years and still going strong!
Thank you my good sir you probably saved me $100 for a repair!
Thanks for sharing this. My blockage was in the small hose connected to the head, but this reassured me that I wouldn't break it :-)
Loved it, it helped me, having troubles getting little hose back on.
Your video saved me. I had a plastic bread tie in there
Thanks Mate from Australia. You are the best!
Thanks for the pointers! Very helpful
Excellent. I was thinking about replacing mine as well. Same tubing where there was a bunch of blockage. Cleared it out and works like new. Thanks for the Video
Not all hero’s wear capes 🙏🏽🙏🏽🙏🏽
Thank You Very Much. Mine was clogged as well. Appreciate It!
Thanks for this video because I finally find out what was wrong with my vacuum
Ohh you're a life saver plus saved me buying a new hoover. A massive thank you 😘
Works perfectly now!! Thank you!!
Holy shit that was my problem too! Thank you for posting this!
Perfect! Totally fixed my problem.
A massive thank you
Thanks finally some good video that helped me
Thank you, it was so easy to follow your instructions.🙂
Thanks. If not for your video, I would not had fixed my vacuum.
Thank you just fixed my Dyson
Thank you so much! It was a (life saver) vacuum saver!
Thanks so much for posting this video!! Extremely helpful! 👍🏻
I AGREE! I tried all the other obvious solutions and was about to buy a new vacuum when I found your post. I took off that little hose and found a clog that went all the way down into the ball support. This should get top billing!!!
You saved me so much time!
You are a legend, I was just about to throw mine away too!!!
Thank you for this video! It fixed my vacuum!
My guy I was literally literally ready to throw it in the trash I'm staring at the recycle bin right now cause it keeps doing that noise but hopefully this works.
Saved my vacuum man. Thanks!
Thank you!!! Very helpful!!!
I've cleaned it out and the larger clip which hold the hose wasn't properly positioned. Anyone have tips on how to reinsert the clip?
Just to add there is another hose between the head and the Y as described in the video. That's where I found my blockage. A piece of torn cardboard with the Dog and cat hair to finish it off.
Appreciate you for posting this!!! I thought I was going crazy lol
You didnt show how to put the hose back in, i was following you as you did it, now i cant get the hose back on, thanks for that
Thank you for this video
Thanks a million!!
Thanks, that was my problem.
Thank you your a Dyson savour.. I could not work out how to remove this part 😁😁 .
Thank you!
thank you x
Thank yoou. Video save dus
Perfect. I can clean again
thanks
Happend to my dc24 PET and Dc24 exclusive
I had a bottle cap
Why won't my wand "click" in to the big hose on my dc24? It seems like a tab broke off on the wand. I'm wondering if you have a fix for this