【工具開箱】香港品牌 GRIFFON 刻線刀實測 | 跌得起的刻線刀? | YM自家品牌

[@hyanr4421]

想問把野係未梯形設計? 睇片好似頭尖尾寬咁既...咁條線未會越刻越闊?🤔

[@studioFO]

你講完我都用卡尺check過. 幼身D的係明顯少少, 呢個就應該係平衡番韌性問題的考量. 但我咁睇, 刻2mm深都好呢個又真係唔會係闊度上有咩野差別. 我用落都仲OK的.

[@YouTubeyan]

又貴唔貴先？同你之前嘅介紹嘅噴槍兩樣加埋要幾多錢呀？我要齊0.1-0.15-0.2-0.3-0.5五刀一槍要幾多錢呀！你唔講價錢好難令所有砌模型嘅人會買㗎！

[@studioFO]

其實影片開價我就唔想的，個感覺好似我有份。每條片我係描述都有link,可以直接睇到價的。感謝支持！

[@thomaschau123]

我覺得刀短些比較好用。容易控制 (個人習慣)。Thank you for sharing 👍 Always support from San Francisco 🇺🇸

[@studioFO]

係的，所以有d師兄鐘意唔用柄淨用把bmc刀

[@thomaschau123]

唔知有冇師兄同我一樣，左手用刀同剪，右手用筆… （因為細個時家長要我用右手寫字）🤣

[@dordor220]

刻線新手, 請問有甚麼size是常用

[@studioFO]

0.15最基本

[@thomaschau123]

I like Madworks ❤ will try this new YM tool 🙂. Thanks for sharing 👍

[@studioFO]

@@thomaschau123 Madworks engraver are nice too, but i think that is more suitable for beginner as prices are really friendly. I will suggest you can try the advanced engraver with the most commonly used sizes first. After all they are not cheap...

[@yukuenchow2232]

咁如果淨係想加返深啲刻線係咪淨係用刻線刀就OK啦

[@studioFO]

yes, 可以咁講

[@yukuenchow2232]

@@studioFO thanks 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾

[@KIeeew]

我知星仔可能會睇 COMMENT
建議刀柄加番可以夾幾粗 & 夾筆刀的資料
推刀幾粗都要寫寫，好多人只係買替代品...(不是 YM 長期信徒)
我想買的，但不想買枝淨夾自家野既...
其實還有 D 野想講，但講太多會被星仔打為 HATER XD

[@studioFO]

呵呵... 佢唔睇我show俾佢睇
放心啦, 我地係識分邊個係真.hater. 師兄你係有尊重我地同討論建議, 感謝.

[@YMStudiohk]

因為佢出實左我先做到個實際數據

[@veranfung432]

正噃! 謝謝介紹!!

[@hkio666]

今次冇抽獎？你隻右手姆指指甲打返格仔好d,睇到都覺得痛

[@studioFO]

今次無抽獎，因為第一批貨番得唔多 （指甲係covid後遺症）

[@leevichol450]

買兩把試試咯，剛啱0.7同2.0一直都冇補翻

[@studioFO]

好呀，其實真係可以試試

[@kiraho6889]

好似beacon

[@chujeremiah]

222

[@kamwapo1828]

444

[@mantoleung6423]

痴線的檢測😂

[@studioFO]

我自己做都覺得痴線...

[@mantoleung6423]

@@studioFO 知道錯，以後就唔好亂黎😂喇

[@holictam2495]

就算試刀，睇到都痛

[@studioFO]

跌落去果下我都個心離一離...