man your cuts are always fye we don't even need to say anything. i'm going to try that technique you did when you combed the hair down on the parietal ridge and start fading down. I've never seen that done on that type of cut.
🔥🔥🔥 you are hands down one of the toughest barbers out there bro, your precision is bananas. I have one question about the guards, those weren’t the purple guards, which ones were you using???
Thank you 🙏 I’m using the Andis purple magnetic guards. They just look grey because of how I color grade my footage. I use my favorite barber color enhancements
was a bit confused..once you did clipper open and faded that out..then did you do 1 guard open all the up to the parietal ridge? and then half guard open underneath?
Hey man since you switched the blades out did you put the 28 tooth master blade or the 22 tooth? Been wanting to change the blade but not sure which one is more for fading
Dope video I need this. I have a question about the andis it’s been said you have to damage the andis in order to zero gap it. Is this true. Eddie said this on his review about this andis master recently.
Thank you 🙏 no sir, not at all. Zero gaps very easily. I seen the video you’re talking about. He was talking about the phat master blade and that blade is not meant to be zero gapped. The phat master blade fully closed blends perfectly into a regular master blade fully open. So with those two blades you don’t need any guards
Not true just gap it like you would another clipper. Pretty simple. Eddy says that because the notches on the master traditionally never fully reach the first notch. By damaging the clipper you can increase the range of motion of the lever allowing it to fully reach that first notch. You dont need to do this to zero gap it.
@@Mike-hy8cs thank you for that info I never had andis masters I allways had babyliss and stylcraft. I been looking for a clipper strictly for blending I been told andis master is it. Also magic clip but the masters are better. Not sure if that’s true I never owned none of those clippers.
@redman1829 I would say cutting wise the masters is one of the best. The only issue with it is that it doesnt have the best run time (90minutes i believe it is). And then it only comes with 1 guard (The 0 guard). Most clippers nowadays provide you with at least 0-4 or even 0-1.5 at the very least.
One of the cleanest fades I've seen
Thank you 🙏
Scraft is sick with it. He’s mad humble too.
Barber to Barber you are one of the coldest to ever do it
Thank you 🙏
I'll second that..
Facts: I learnt the "Develop a barber's eye" secret from him
Cleanest fade I’ve seen on someone with dents or bumps on their head.
Thank you 🙏
Top notch. Respect 💯
IF YOU ASK ME THIS HAIRCUT IS FIRE I FEEL LIKE THE ANDIS AND CRAFT ARE A TEAM MASTERED
Thank you very much! Definitely appreciated
Man he issss the coldest, and he strong in his faith. He dah man straight up. All the way around 🎉
Thank you so much! Appreciate you 🙏
What we’ve been waiting for 😊
🙏🙏🙏
cold 🥶 wit it 💪
Thank you 🙏
First class as always. 🫡🎯💈
Much appreciated!
FIYAAAAAAH my Brother in Christ is goated with the clippers man!
Thank you bro 🙏
man your cuts are always fye we don't even need to say anything. i'm going to try that technique you did when you combed the hair down on the parietal ridge and start fading down. I've never seen that done on that type of cut.
Thank you! I do that with tapers as well when they have fro’s. Way easier to blend into it when you create the shape going down first
@@s.craftblendz730 Thanks
Crazy clean! 🔥🔥
Thank you 🙏
Clean as always bro 🔥🔥
Thank you bro 🙏
🔥🔥🔥 you are hands down one of the toughest barbers out there bro, your precision is bananas. I have one question about the guards, those weren’t the purple guards, which ones were you using???
Thank you sir! They were the purple guards I just color grade my videos for more blacks and greys so it takes out the purple color
🔥 🔥 🔥 cut my brother 🙏🏼
Thank you bro 🙏
Yoyo!.... Like always 🔥🔥🔥 but just wondering what guard system are you using and what enhancement spray is that?
Thank you 🙏 I’m using the Andis purple magnetic guards. They just look grey because of how I color grade my footage. I use my favorite barber color enhancements
are those the OG Andis guard you are using?
Yes sir
Watched you in barber school And still to this day as a licensed barber
was a bit confused..once you did clipper open and faded that out..then did you do 1 guard open all the up to the parietal ridge? and then half guard open underneath?
Usually I’ll do each guard open and closed and between the one guard and no guard, I use the zero guard open and closed to tie them together
@@s.craftblendz730 ok..but do you use the 1 guard open all the way to the parietal ridge though?
Yessir 🦾🦾🦾🦾. That’s a good dude right there too! Glad to see u got him all the way right! Appreciate the pointers bro 💯💯💯🫡🫡🫡🫡
Appreciate that bro! 🙏
🔥🔥🔥
🙏🙏🙏
Hey man since you switched the blades out did you put the 28 tooth master blade or the 22 tooth? Been wanting to change the blade but not sure which one is more for fading
That’s a great question. I’ve honestly never paid attention to it. I’ll check tomorrow when I’m back in the studio
@@s.craftblendz730 for sure thank you man ! 🙏🏽
Did you zero gap these craft?
Yes sir. 👍🏻
🔥💈👑
🙏🙏🙏
Dope video I need this. I have a question about the andis it’s been said you have to damage the andis in order to zero gap it. Is this true. Eddie said this on his review about this andis master recently.
Thank you 🙏 no sir, not at all. Zero gaps very easily. I seen the video you’re talking about. He was talking about the phat master blade and that blade is not meant to be zero gapped. The phat master blade fully closed blends perfectly into a regular master blade fully open. So with those two blades you don’t need any guards
Not true just gap it like you would another clipper. Pretty simple. Eddy says that because the notches on the master traditionally never fully reach the first notch. By damaging the clipper you can increase the range of motion of the lever allowing it to fully reach that first notch. You dont need to do this to zero gap it.
@@s.craftblendz730 thank you for that this is what kept me from buying that clipper I want it it seems nice on the blends.
@@Mike-hy8cs thank you for that info I never had andis masters I allways had babyliss and stylcraft. I been looking for a clipper strictly for blending I been told andis master is it. Also magic clip but the masters are better. Not sure if that’s true I never owned none of those clippers.
@redman1829 I would say cutting wise the masters is one of the best. The only issue with it is that it doesnt have the best run time (90minutes i believe it is). And then it only comes with 1 guard (The 0 guard). Most clippers nowadays provide you with at least 0-4 or even 0-1.5 at the very least.
Is the black master ever coming back
It’s back 😁
@@s.craftblendz730 wereee??
how did you get your guards in gray?
They’re purple. It’s just how I color grade my videos. I desaturate almost all colors except skin tone colors
👍👍🔥🔥🔥
🙏🙏🙏
Wait a minute…. Studio?!?! 🤨 😁🙏🏽💈
😁😁😁
@@s.craftblendz730 My Man‼️💈
🔥🔥🔥
🙏🙏🙏
@@s.craftblendz730 come on bro u a goat from early🙏🏿👊🏿👊🏿