Hello i have a question. I own a beko RDNE505E30DZMN. In the menu i have BA function it was turned off and i turned on open the frigde but no blue Light. On the back of frigde on ever fresh box in the back in the same zone where your frigde have blue Light i have a plastic Cover i a thing coverd with the plastic i need to remove the plastic? And behind that plastic Cover should be the blue Light bulb?
Bună ziua,am dezghetar frigiderul,l-am curățat,și când l-am pornit îmi apare setarea 18 cu 4,dar imediat se schimba in 20 cu grade celsius și semnul ! curosu,ce pot sa-fac?
Hi i need help. My beko fridge keeps adjusting the temp on its own. Sometimes it gets as high as 33. Nothing wrong with the fridge though, its still cold like normal. Only the temperature beeping & adjusting on its own. How do i fix this?
Eco mode is a working mode when the refrigerator door is not opened for more than 6 hours without notification settings. Will adjust the temperature of the freezer (FRZ) to -18 ° C and adjust the temperature in the freezer (FF) to 4 ° C to enter the economy mode to reduce energy consumption effectively It can save electricity as well
Good morning Washington Deles. I am following this video guide with great interest, I have a problem with the Beko Combined Fridge Model RCNA366E60XBN condensation ice forms only in the part of the shelves exactly on the left side. It seems that the fan does not work properly. How do I reset my combi fridge to the correct factory settings? Following the video I would not like to have messed up some parameters. I have searched all over the parts to find a guide where it says how to do a Factory Hard Reset. Thank you very much for your attention to my problem.
How can I contact you pls help I keep watching on you tube regarding my problem on my beko ref I followed every step but nothing change my ref is not cooling
The screen shows On on the left side and SC on the right side I can hear the blower is active I can't put it on the normal digit coz it the compressor will stop
Ensure your mainboard is functioning correctly by utilizing service mode. This is the easiest and most efficient way to check if your device is in good condition
For safety reasons, we recommend that you unplug your unit(3mins). In rare cases, the system may experience malfunctions. Probably the algorithm malfunction
Hello Deles. Could you tell me what means zones FH , FE , rH, rE. I understood that are different zones in appliance, but I not understand the meaning on letters. Thanks for help. The video is great. In manual for the refrigerator these zones are not explained.
It kinda fixed but the fridge itself wasn't doing what irs did. But than i hear this beep and the screen where it shows the number is just empty. Idk what to do!!! Pls help!😭
My Beko refrigerator display inside is sweating. And the digit automatically changing on display. How can solve it my dear ? I will be so grateful to get perfect solution.
Merci beaucoup pour vos explications, cela m'a beaucoup aidé !
Thank you so much this vidio helped me a lot
sukran katir
Hello i have a question.
I own a beko RDNE505E30DZMN.
In the menu i have BA function it was turned off and i turned on open the frigde but no blue Light. On the back of frigde on ever fresh box in the back in the same zone where your frigde have blue Light i have a plastic Cover i a thing coverd with the plastic i need to remove the plastic? And behind that plastic Cover should be the blue Light bulb?
Bună ziua,am dezghetar frigiderul,l-am curățat,și când l-am pornit îmi apare setarea 18 cu 4,dar imediat se schimba in 20 cu grade celsius și semnul ! curosu,ce pot sa-fac?
Thank you very much. Do you have an official Manual for this ?
Sukran katir
Hi i need help. My beko fridge keeps adjusting the temp on its own. Sometimes it gets as high as 33. Nothing wrong with the fridge though, its still cold like normal. Only the temperature beeping & adjusting on its own. How do i fix this?
Eco mode is a working mode when the refrigerator door is not opened for more than 6 hours without notification settings. Will adjust the temperature of the freezer (FRZ) to -18 ° C and adjust the temperature in the freezer (FF) to 4 ° C to enter the economy mode to reduce energy consumption effectively It can save electricity as well
Hello , thqnk you for this video .i have a problem wity this fridge.the screen does not turn on after removal. I had to touch the wires from behind
Good morning Washington Deles. I am following this video guide with great interest, I have a problem with the Beko Combined Fridge Model RCNA366E60XBN condensation ice forms only in the part of the shelves exactly on the left side. It seems that the fan does not work properly. How do I reset my combi fridge to the correct factory settings? Following the video I would not like to have messed up some parameters. I have searched all over the parts to find a guide where it says how to do a Factory Hard Reset. Thank you very much for your attention to my problem.
How can I contact you pls help I keep watching on you tube regarding my problem on my beko ref I followed every step but nothing change my ref is not cooling
ด้านบนเย็นแต่ด้านล่างไม่เย็น
เป็นเพราะอะไรครับ
Re off?
The screen shows On on the left side and SC on the right side I can hear the blower is active I can't put it on the normal digit coz it the compressor will stop
Ensure your mainboard is functioning correctly by utilizing service mode. This is the easiest and most efficient way to check if your device is in good condition
خويا اعطيني طرقة كيفاش ندير باش نحي رياشة بيسك زاجة راهي توشي واحدها
Hi, need your help, why our ref temperature keeps changing? Eco is open, and it has the red exclamation point, please need your answer 🙏
For safety reasons, we recommend that you unplug your unit(3mins). In rare cases, the system may experience malfunctions. Probably the algorithm malfunction
I get oC error on my fridge. Can you guide how to correct that
Hello Deles. Could you tell me what means zones FH , FE , rH, rE. I understood that are different zones in appliance, but I not understand the meaning on letters. Thanks for help. The video is great. In manual for the refrigerator these zones are not explained.
I would like to know that too. It would help me a lot. Could you please write us here?
WAZZY ! From MCL
rE off?
U hv service mode for asd 241 pls?
Hello i have the same frage it's showing AA AA what is the problem please
how to on wifi beko refrigerator model D66401NE plz help me🥺🥺🥺🥺🙏🙏🙏🙏
Hello i clean my ref and unplug for 2 weeks because we travel and now i open it there's no cold can you help me
It kinda fixed but the fridge itself wasn't doing what irs did. But than i hear this beep and the screen where it shows the number is just empty. Idk what to do!!! Pls help!😭
I'm having the same problem with mine
How to remove a red triangle
If you come across a hazard, simply unplug it for 15 minutes and it will return to normal operation.🙂 Sometimes the algorithm malfunctions.
Hello please can you share a document or pdf or written procedure
my beko ref is displaying E -4 how can i change it back to normal and the indicator doesnt turn off
It's likely that there is a buildup of ice on your evaporator and that there is a malfunction with the heater.E4 IS RELATED TO HEATER ERROR
Beko how to fix this.
e 13 error code, what should I do?
👍👍👍Merci
Can you help me ?
Why not..tell me
Thanks pal
Pipi ka ser
how to connect homewhizz ?
th-cam.com/video/U6zU7-899AE/w-d-xo.html
Pls visit Beko changel,the highlight indicated
@@washingtondeles128 i go there ,no explanation either on how to coneect my refrigerator to honewhizz
@@ifigaming4713need you to register the SKU of your refrigerator to activate the software.
My Beko refrigerator display inside is sweating. And the digit automatically changing on display. How can solve it my dear ?
I will be so grateful to get perfect solution.
Its always fallashing
Your refrigerator facing high pressure or compressor overheat, possible also algorithm failed
hi, i have a problem with my beko ref can i personal message you?
sure..🙂