3d printed 10th scale Two post lifts Part 2/3D printing RC car two post lifts /Painting rc body
ฝัง
- เผยแพร่เมื่อ 5 ม.ค. 2021
- #scaleaddiction #corvette #postlifts
Hello its Ali, in todays video i will show you the prosses of how to design 3d printed 10th scale two post lift with sketchup, printing with Creality Ender 3 3D Printer, and painting/
Get the file here:
Post lifts: cults3d.com/en/3d-model/tool/...
C8 Corvette: cults3d.com/en/3d-model/tool/...
10TH SCALE MUSTANG SHELBY 1967: cults3d.com/en/3d-model/tool/...
You will need
3 Position switch
Wires
9V battery and 9V cap
9g servo
2x M4 1inches bolt
3x toy car screw 8-10mm
⭐Its important to oil the rode and the slider
3D printing RC car two post lifts is one of the best garage scale tool
the way i designed the two post lift is very easy to print with minimum amount of supports/
if you havnt seen the V8 corvette video show How to 3d print rc car body 3D printing /10th scale C8 Corvette with less amount of supports,
To enter the Giveaway for the Two Post lifts STL files
1. You need to be subscribed
2. Comment your email
i will pick five lucky winner, and announce it in the next video
Watch Next: • 3D printed 10th scale ...
🔔 Hit the bell next to Subscribe so you don't miss a video!
Follow my Instagrams so we can be best friends
-------------------------------------------
/ wheelshobby
/ alimechh
Like my facebook page:
-------------------------------------------
/ scaleaddiction
**If the video was fun, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
BOYA BY-BM2021Microphone: amzn.to/32147BA
BOYA BY-M1 3.5mm: amzn.to/2HsfGs1
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : / ali.hoshyar.. . - ยานยนต์และพาหนะ
Deff about to go download that file, neat and affordable, thank you! New sub for sure! Amazing work
Appreciate that, glad you like my work and support it, thanks
yes buddy! this looks amazing!
Thanks man
I love to follow you, you are doing very well. Congratulations. Great
Thanks, appreciate that
It looks amazing!!!
Thanks for turning in
Exactly what I thought you were busy with. This looks so epic man 😁🙌🏼
Yeah thanks, i hade to make it easy as possible and been working on some cool projects as well 😉
Marvelous, subscribed!
Thanks
ExcellantI !!!
Thanks
It looks awesome
Thanks
You do amazing work you are a master Craftsman. The work that you're doing with K-pop is amazing you guys are Masters I really enjoy your work thank you for sharing. 👌🏻🔥😎🔥🤙🏻👏🏻👏🏻👏🏻 If you're going to reprint the spinning post to bring them up and down try to do it in Black so you don't see the white hide the post in Black like you hide the wires under.👍🏻 Just a thought.
Thanks man, glad u like it, yea thats a geat idea, all my filaments white for now, but thats a great idea
haha good job! there is less left to have the full garage
Yea, I'm working on it, specially the functional ones
That is so sweet! Man I need a printer!
Yes you do, and i should get one more too lol
@@scaleaddiction What would you say is the best quality printer under $500?
And check out my latest video I just Uploaded. It's pretty crazy. It's like RC comedy
@@brsrc759 Ender 3 pro, best choose and prints very well
@@scaleaddiction thank you
What an awesome idea, I wonder how easily it could be scaled to 1/24 and if a couple micro servos might work.
Thanks, that will be awesome
I want one for me like that
I got the file of this project you made everything is fine but the engines do not work equally!!! They work differently from each other so there is imbalance. How did you find a solution to this? Is there a solution?
Make sure to use 2 new servos and the wires you use both must be same length and join the in the middle and then take it to the switch, thats how i solved this problem
@@scaleaddiction ok i will try, thank you
I would like something, can you send me the screw length as 205mm? My vehicle is a truck, I extended the poles a little longer, but the screw is small, can you do this for me?
@@scaleaddiction I connected it right in the middle, the servo motors are the same but still slipping
where or how did you get the stickers for the front?
i printed them on a sticker paper
@@scaleaddiction oh nice, thanks!
hallo where can i find the files plaese
cults3d.com/en/3d-model/tool/10th-scale-two-post-lifts
Can u message me back about a commission 3D model ? Thanks