Hi! why cant my canon g2000 printer does not blink the red light for the second 5 pressed (STOP.) It was stocked in the power button lights on. (and its rolled out paper after the first 5 times pressed). HELP!! THank you!!
Seriously, thanks so much, I called Canon helpline and they told me I needed to buy a new printer. I went on loads of sites and was about to buy a new printer and then I did this and it worked and now my printer is back and working. I appreciate it.
My G3200 ( 2 years old) stopped working when I tried to have it do a deep cleaning. The ON and ALARM buttons flashing. Called Canon -they told me it's toast, need a new one and offered $80 discount if I bought a new one from them. Instead, I found this video and followed the instructions - 3 minutes later it's working again. Thanks Waris!
step by step: 1) turn off, do not unplug 2) hold down stop, then turn on printer, holding both for ~3 seconds 3) release stop, then wait a few seconds 4) still holding power, press stop key 5 times -- green light will start flashing at power button 5) wait til green light becomes steady 6) press stop 5 times, then power key once -- green light is flashing again, printer is "resetting" -- it will then quickly print a paper 8) put it back in the tray (he rotates...looks like printed side was at bottom, now at top, same side...probably doesn't matter) 9) press stop key 3 times, then power key once - you'll get a final print out, issue should be resolved. worked for me, pixma g3200 with 5b00 error. thanks for this resolution without having to try all of those other shady-feeling google results (for me, 5b00 error for full waste ink pads...mine were pretty full. removed them, cleaned, and then did this.)
Alhamdulilah. Berjaya. Terima kasih kepada tuan punya video ini. Printer saya G2000. Saya hampir putus asa. Ink absorber saya dah tukar. Tapi masih keluar error ink absorber need to be replace. Selepas jumpa video ini, saya cuba . Dan alhamdulilah. Error itu dah hilang dan printer saya dah bboleh guna. Terima kasih banyak banyak.
YOU ARE MY HERO!! Was busy for hours trying to get all my colors back. Nothing worked. Resetted the printer, did some cleaning with stop and flickering light and.... IT WORKED!! Thank you so much!!
0.41 When the green light has become stable, whenever I press stop (Parar) 5 times after, the light doesn't change and when I complete your steps its hasn't reset. Help need for Canon Pixma MG2410.
My printer hasn't worked for a long time and I was thinking about getting rid of the thing. With your instructions it prints like before. Thank you very much for that 👍👍
I followed this and it looked promising, but after hitting stop 5 times and letting the printer reset, it just turned off instead of printing a page. Do you know why that is?
Gracias!!! me funcionó, al principio solo hice la primera parte y pensé que no funcionaría , pero después hice lo de presionar 3 veces el botón naranja y el de encender e imprimió. Tengo una PIXMA ix6810 y ahora está operativa con cartuchos rellenos con jeringa. Te ganaste un suscriptor :)
This is not working on my printer. When I hit the start button after hitting the red triangle 5 times for the second time, my printer just turns off. This is driving me crazy!
@@ArtVlog Unfortunately no, I never did fix it and I need a working printer for my work. I gave up and bought a new HP which is now working beautifully!
Thank you Waris! Worked for me, with Canon g3200. No more having to acknowledge ink pad full message and having to press green start button every time I turn on printer. Of course this wont stop the pad from truly becoming full and overflowing, but that's a bridge for yet another day!
On my Canon G3200, I reached the 7 flash 5B00 error code for a full waste counter. This worked to bypass the lock-down so I can at least get a few more prints out of this machine. Thank you!
This worked perfectly on my g3200! Didn't think I would ever see it print again after reading about the ink absorber error, but this worked like magic. Thank you so much for making this video!
Thank you for this excellent video Varis. I have an MP280 and the procedure must be a little different- but this has got me closer than anything else so far. As a side note to others- the post below from Charles Knight is possibly a scam- the number provided is NOT Canon support and they will try to get you to turn over control of your computer via the bios- DON"T DO IT. Canon support no longer covers my model, but I may check out their paid support just to get this fixed.
Thank you. Works perfectly. Also try to remove old pads and put new ones is ink pads are completely wet. Summary looks like avoid deep cleaning in g3000 series continuously.
BRAVOOO! A lil bit hopeless in the beginning because it is said that had to be brought to the canon service center (official manual) but hey it Worked like charms! Syukran brother!
of all the videos out there about this msg, yours is the best... i couldn't get theirs to work even it was the same process... so it means your video explains the best and shows results by the printout... thanks! I keep this video for future issues!
I removed the sponges from the back of the machine and washed them in warm soapy water. I squeezed all the moisture out of them and put them in a barely warm oven to dry. There are three sponges in all. One large one on the bottom and two on the top. You have to remove them all. It still wouldn't work. I found your video referenced on amazon reviews and it worked! YOU ARE BRILLIANT! THANK YOU! I WILL HAVE YOUR NAME TATOOED ON MY BUTT!
100% worked. you save my 2500/= (Sri Lankan rupees) thank you very much. keep helping to helpless. god will bless you with peace. thank you again mister.
Thank you very much for this video. I was afraid that I will need to take the printer to the service centre. This worked and I was able to reset the error code. The printer has started printing again. God bless you!
THANK YOU!! Had to do this process twice in between turn the machine on and off a few times but eventually it cleared the 5B00 error and I'm back up and running.
Thanks for the video. My printer is G2400. It however goes off after I have successfully completed the first phase of the process i.e after the green light has been stabilized. Whenever I press the cancel key five times, it goes off each time I press the power button. Any help?
Many thanks for your video, you saved my printer that I was going to throw away. thanks to you, my printer will print 2 or 3000 sheets before adding ink. its a traduction from french language . i am from France.
Good morning, I'm from Brazil and I'm giving God a lot of thanks for you with such simple means. You solved my problems. All solutions that appeared were paid for. still the people who help their peers without making a profit was my dear brother. It's because that's what you are, a brother. loving your neighbor as you yourself was worth, thanks, thanks, even sorry for the redundancies is for the purpose of so grateful that I am if I could give you a thousand like until I tried to thank you stay in the peace of the creator.
Was completely convinced this didn't work, as I tried it previously from a different video - WRONG! Idk what was different, but this method worked AND pushed out the paper I couldn't even see jammed in there.
My deepest gratitude Waris, I was able to reset my printer with your help. (Mi mas profunda gratitud Waris, pude restablecer mi impresora con tu ayuda) A continuación les comparto las instrucciones que seguí para restablecer la impresora de mi propiedad CANON G2100, asumiendo el riesgo ante lo desconocido, pero confiando en la buena voluntad y generosidad de aquellos que comparten su conocimiento, todo esto de acuerdo a las indicaciones que Waris Jamal comparte en su video, si te animas a intentarlo BAJO TU CRITERIO Y ABSOLUTA RESPONSABILIDAD, pues adelante; esto es lo que yo hice y así me funcionó, con el código que me aparecía 5B00, en otros videos te ofrecen una llave y una serie en venta, no dudo que funcione, pero a mi no me hizo falta (OJO: esto no es una traducción literal de las indicaciones del video): Cargar una hoja en la bandeja. Apagar la impresora sin desconectarla. Oprimir el botón del triangulo rojo sin soltarlo y a la vez oprimir el botón de encendido dejándolo presionado también; enseguida soltar SOLO el botón del triangulo rojo; SIN SOLTAR el botón de encendido oprimir 5 veces el botón del triangulo rojo, proceder a soltar el botón de encendido, notaras que empezara a parpadear el led verde, esperar hasta que se estabilice, después de lo cual deberás oprimir 5 veces nuevamente el botón del triangulo rojo y enseguida el botón de encendido, parpadeara nuevamente el led verde unos minutos y se producirán una serie de ruidos internos en la configurador de la impresora, después de lo cual se imprimirá una hoja de prueba, volver a cargarla en la bandeja oprimir nuevamente 3 veces el botón del triangulo rojo y una vez el botón de encendido y se imprimirá la hoja con los parámetros de la impresora y LISTO
Thank u so much it worked well as when i saw previous videos once i press the power button printer goes off, but on following this method it really worked well
thanks usefull trick 100% wroking thanks sir
You are welcome.
Gurmant Rajput thank you very much..
Hi! why cant my canon g2000 printer does not blink the red light for the second 5 pressed (STOP.) It was stocked in the power button lights on. (and its rolled out paper after the first 5 times pressed). HELP!! THank you!!
@@qwertyasdfgh3479 I'm also having the same problem but it seems like no one has a solution for this lol
Same with me 😭
Seriously, thanks so much, I called Canon helpline and they told me I needed to buy a new printer. I went on loads of sites and was about to buy a new printer and then I did this and it worked and now my printer is back and working. I appreciate it.
Nothing surprising - Canon earns money on selling new printers, not on telling customers how to fix an old one...
My G3200 ( 2 years old) stopped working when I tried to have it do a deep cleaning. The ON and ALARM buttons flashing. Called Canon -they told me it's toast, need a new one and offered $80 discount if I bought a new one from them. Instead, I found this video and followed the instructions - 3 minutes later it's working again. Thanks Waris!
step by step:
1) turn off, do not unplug
2) hold down stop, then turn on printer, holding both for ~3 seconds
3) release stop, then wait a few seconds
4) still holding power, press stop key 5 times
-- green light will start flashing at power button
5) wait til green light becomes steady
6) press stop 5 times, then power key once
-- green light is flashing again, printer is "resetting"
-- it will then quickly print a paper
8) put it back in the tray (he rotates...looks like printed side was at bottom, now at top, same side...probably doesn't matter)
9) press stop key 3 times, then power key once
- you'll get a final print out, issue should be resolved.
worked for me, pixma g3200 with 5b00 error.
thanks for this resolution without having to try all of those other shady-feeling google results (for me, 5b00 error for full waste ink pads...mine were pretty full. removed them, cleaned, and then did this.)
My printer is getting same error pls suggest me pls sir
Alhamdulilah. Berjaya. Terima kasih kepada tuan punya video ini. Printer saya G2000. Saya hampir putus asa. Ink absorber saya dah tukar. Tapi masih keluar error ink absorber need to be replace. Selepas jumpa video ini, saya cuba . Dan alhamdulilah. Error itu dah hilang dan printer saya dah bboleh guna. Terima kasih banyak banyak.
step 2 not work for me stay green after clicking the Orange triangle
YOU ARE MY HERO!! Was busy for hours trying to get all my colors back. Nothing worked. Resetted the printer, did some cleaning with stop and flickering light and.... IT WORKED!! Thank you so much!!
0.41 When the green light has become stable, whenever I press stop (Parar) 5 times after, the light doesn't change and when I complete your steps its hasn't reset.
Help need for Canon Pixma MG2410.
I tried eveything. This is the only one that works (atleast for me)
I CANNOT THANK YOU ENOUGH
Mine switched completely off, without printing anything
My printer hasn't worked for a long time and I was thinking about getting rid of the thing. With your instructions it prints like before. Thank you very much for that 👍👍
Wow! It worked perfectly on my G3200. Many thumbs up (and several thumbs down to Canon).
I was on the verge of having a mental breakdown from trying to fix my Canon Pixma IX6820 and this did the trick! THANK YOU!
I followed this and it looked promising, but after hitting stop 5 times and letting the printer reset, it just turned off instead of printing a page. Do you know why that is?
same here
@@drinkwhiskysour same here
Same here :( I could not fix it
the same pixma mg2950
Every website told me to take my printer in to be repaired, this worked first time. Thanks for the help.
Why my printer gets turned off when I press the power button after I pressed the stop button 5 times?
Me too
@@lawrencejaeabengoza3212 Me too. Any ideas why or how to work around that? I have an MX340
Same problem, can anyone resolve , plus I get a blank page while pressing 5 times for first time
me too? :( help
I saw nearly 15-20 video
But no one share such detail
Your technique worked
Thanks
You’re an angel thank you for this hack!
My Canon G3501 has been silent for 3 months - AND IS NOW WORKING AGAIN. Thank you!
Gracias!!! me funcionó, al principio solo hice la primera parte y pensé que no funcionaría , pero después hice lo de presionar 3 veces el botón naranja y el de encender e imprimió. Tengo una PIXMA ix6810 y ahora está operativa con cartuchos rellenos con jeringa. Te ganaste un suscriptor :)
This is not working on my printer. When I hit the start button after hitting the red triangle 5 times for the second time, my printer just turns off. This is driving me crazy!
same! have you solved this? I need the printer working ASAP
@@ArtVlog Unfortunately no, I never did fix it and I need a working printer for my work. I gave up and bought a new HP which is now working beautifully!
@@nikospapapavlos536 ahh understood, thanks for the reply! I definitely won't go back on Canon either tbh! have a good day!
Thank you Waris! Worked for me, with Canon g3200. No more having to acknowledge ink pad full message and having to press green start button every time I turn on printer. Of course this wont stop the pad from truly becoming full and overflowing, but that's a bridge for yet another day!
I want to reset my canon G4000 can uh tell me how to do it
please i am in a emergency........
Follow procedures as given in video
레이저 프린터 주문해놓고 마지막 희망으로 해봤는데!!!!!! 아무리해도 안되던 시스템 초기화가 완벽히 수행되었습니다.
당신은 나의 히어로입니다라는 댓글이 왜 있는지 알겠네요!! 감사합니다!!!
Called Canon. Lady said it would be more expensive to fix and to go out and buy a new one. 5 minutes later working like new. Amazed.
On my Canon G3200, I reached the 7 flash 5B00 error code for a full waste counter. This worked to bypass the lock-down so I can at least get a few more prints out of this machine. Thank you!
Brilliant! ! ! Many THANKS. I have tried everything and your video FINALLY was what worked.
Tq abg,kalau tidak tak pasal2 saya hntar ja kat kedai,tq skali lagi untuk video abg ni,smoga berkat abg dunia akhirat,
This worked perfectly on my g3200! Didn't think I would ever see it print again after reading about the ink absorber error, but this worked like magic. Thank you so much for making this video!
Thank you for this excellent video Varis. I have an MP280 and the procedure must be a little different- but this has got me closer than anything else so far. As a side note to others- the post below from Charles Knight is possibly a scam- the number provided is NOT Canon support and they will try to get you to turn over control of your computer via the bios- DON"T DO IT. Canon support no longer covers my model, but I may check out their paid support just to get this fixed.
Thank you. It's a great help. It worked as you said. No need to download any software and no serial codes needed. Bless your heart.
Thank you. Works perfectly. Also try to remove old pads and put new ones is ink pads are completely wet. Summary looks like avoid deep cleaning in g3000 series continuously.
BRAVOOO! A lil bit hopeless in the beginning because it is said that had to be brought to the canon service center (official manual) but hey it Worked like charms!
Syukran brother!
Worked Perfectly. Saved a visit to the Service Center. Thank You.
of all the videos out there about this msg, yours is the best... i couldn't get theirs to work even it was the same process... so it means your video explains the best and shows results by the printout... thanks! I keep this video for future issues!
I removed the sponges from the back of the machine and washed them in warm soapy water. I squeezed all the moisture out of them and put them in a barely warm oven to dry. There are three sponges in all. One large one on the bottom and two on the top. You have to remove them all. It still wouldn't work. I found your video referenced on amazon reviews and it worked!
YOU ARE BRILLIANT! THANK YOU! I WILL HAVE YOUR NAME TATOOED ON MY BUTT!
It's too strong, my G2800 is normal, and one of the most useful ones in all video tutorials. love you. Graaaat！！！
others post you need to purchase some sort of reset key... so thanks for showing us this way...your video is invaluable. KR, Allen
You are so superb! Thank you so much for your help! No software, no serial needed indeed! You are, my friend, a living legend!
I was going to buy reset key or throw away my printer but your video saved me. Thanks.
Muy buen video. Me salvó del problema de bloqueo de mi impresora G3100. Gracias totales.
100% worked. you save my 2500/= (Sri Lankan rupees) thank you very much. keep helping to helpless. god will bless you with peace. thank you again mister.
ALLELUYA Printer working after 2 years not working!!! Thank you!!
Thank you so much for this fix. I'd spent hours trying to get rid of the 5B00 error. Your post fixed it for us, thank you again!
Like I was crying this whole morning . Cause I can't print out my report. . thank you so much 😇😥😥 you save my day. My job also
Tried loads of different tactics. Your's was the only one that worked. Thank you.
Gracias genio!!! Ahora me sale un cartel avisandome que no tiene tinta, pero al menos se que rellenando los cartuchos ya va a andar bien. Gracias!!
Very nice sir... Mere printer mei aayi ye problem.. And aap k video ne 5 min mei OK kar diya printer
Thank you very much for this video. I was afraid that I will need to take the printer to the service centre. This worked and I was able to reset the error code. The printer has started printing again. God bless you!
You are life saver. Just fixed my Printer now and its working perfectly
THANK YOU!! Had to do this process twice in between turn the machine on and off a few times but eventually it cleared the 5B00 error and I'm back up and running.
Best trick ever to resolve this problem on youtube...
Buenísimo el tutorial. Me ayudaste y pude resetear la G3100. Se gradece el aprendizaje y sobre todo que lo puedas compartir. Buenas vibras!!!
Excellent! Just reset my G2000 printer's ink counter using his guide.
wow it worked! Thank you so much. By far the easiest video to follow.
Thanks for the video. My printer is G2400. It however goes off after I have successfully completed the first phase of the process i.e after the green light has been stabilized. Whenever I press the cancel key five times, it goes off each time I press the power button. Any help?
Many thanks for your video, you saved my printer that I was going to throw away. thanks to you, my printer will print 2 or 3000 sheets before adding ink. its a traduction from french language . i am from France.
Thanks so much. I've been with out the printer for 3 days trying to figure out how to fix it. This worked perfectly ....
Thanks for this video. Worked on G3000. Saved a visit to service center. Thanks !
Good morning, I'm from Brazil and I'm giving God a lot of thanks for you with such simple means. You solved my problems. All solutions that appeared were paid for. still the people who help their peers without making a profit was my dear brother. It's because that's what you are, a brother. loving your neighbor as you yourself was worth, thanks, thanks, even sorry for the redundancies is for the purpose of so grateful that I am if I could give you a thousand like until I tried to thank you stay in the peace of the creator.
My problem has been solved after following your steps. thank you so much dear
Thanks man it worked on my G3100 with de 5B00 error!! No Software needed. Help a lot. Thanks again
I don't have this model, but your work is appreciated.
spent almost 2days to solve this problem, and finally found your video! Thank you so much!
Was completely convinced this didn't work, as I tried it previously from a different video - WRONG! Idk what was different, but this method worked AND pushed out the paper I couldn't even see jammed in there.
I just tried it on Canon G4000 and it works!!!! thank you
My deepest gratitude Waris, I was able to reset my printer with your help. (Mi mas profunda gratitud Waris, pude restablecer mi impresora con tu ayuda) A continuación les comparto las instrucciones que seguí para restablecer la impresora de mi propiedad CANON G2100, asumiendo el riesgo ante lo desconocido, pero confiando en la buena voluntad y generosidad de aquellos que comparten su conocimiento, todo esto de acuerdo a las indicaciones que Waris Jamal comparte en su video, si te animas a intentarlo BAJO TU CRITERIO Y ABSOLUTA RESPONSABILIDAD, pues adelante; esto es lo que yo hice y así me funcionó, con el código que me aparecía 5B00, en otros videos te ofrecen una llave y una serie en venta, no dudo que funcione, pero a mi no me hizo falta (OJO: esto no es una traducción literal de las indicaciones del video): Cargar una hoja en la bandeja. Apagar la impresora sin desconectarla. Oprimir el botón del triangulo rojo sin soltarlo y a la vez oprimir el botón de encendido dejándolo presionado también; enseguida soltar SOLO el botón del triangulo rojo; SIN SOLTAR el botón de encendido oprimir 5 veces el botón del triangulo rojo, proceder a soltar el botón de encendido, notaras que empezara a parpadear el led verde, esperar hasta que se estabilice, después de lo cual deberás oprimir 5 veces nuevamente el botón del triangulo rojo y enseguida el botón de encendido, parpadeara nuevamente el led verde unos minutos y se producirán una serie de ruidos internos en la configurador de la impresora, después de lo cual se imprimirá una hoja de prueba, volver a cargarla en la bandeja oprimir nuevamente 3 veces el botón del triangulo rojo y una vez el botón de encendido y se imprimirá la hoja con los parámetros de la impresora y LISTO
agrego que ya estaba buscando otra impresora de reemplazo antes de encontrar este video, thanks Waris
Thanxs a lot. for my printer was dead for two years trying to find the solution. but now am operating on an OPEN HEAVEN. thnxs again!!!
Is your problem also, the orange light didnt stop blinking? Mine was like that, but i'll try the method above 😭
Thank you so much my printer is now working properly without an error code thank you and God Bless 🙏😁😁❤️
Excelente ayuda para solucionar problema, nada mas didáctico que esto
You know this is the most helpful video i went to webs and other videos but it doesnt seem to work on my printer only this so thanks
thank you!!!!!! Canon just told me to take it in for a repair!
gracias me ayudo mucho he visto muchos tutoriales peri ninguno me habia servido a este le doy milllll estrellas gracias gracias
Thank you so much. After several attempts and wasting an hour of time, I got it.
muy bien
it really works. Alhamdulillah. I don't need to buy any software or take my printer to the centre. thanks a lot.
Been doing this for an hour but this reset could have saved me. Thank you so such!
Gracias, sin el servitool usando este video reinicie el contador de canon G2100, SUPER
thanks this is valuable, got my Pixma 3200 working again and saved some money
Thanks you. I changed he absorbed and use this Method. It works 100%. Thanks.
Fantastic! This worked great for a Canon MG2522. I stopped after pushing stop 5 times. Thanks!
Como entro en modo servicio , gracias.
Eres un maldito genio!!! Gracias! mil gracias!!!!!!! Canon G3100 Pixma. Reseteado sin problemas!!!!!
after people trying to take my money with the cheapass wicreset software, this really worked. Thank you!
It worked on both of my G2000! Thank you!
I found this same solution in other video, but still thankful, like and subscribed...
Y r my life saverrrrr!!!!! Stupid service tool keep show error 005.. Thank God i find ur Vid. Thank again!!
Thank you very much!
The procedure works very well!
Greetings from Mexico!
Works like a dream on the Pixma g3400. Thanks, Jamal
Thank You Very Much !
100% Worked for Canon G4400 !
tank you so much sir. i have tried so many time in software but its not work. but your idea its worked
Worked on my G1200, huge thanks to you Varis!
Thank You guy, now i can continue work with the printer without waste it!
IT WORKS,,,100% WORKS,,,I TRIED IT....THANK YOU SO MUCH.....
Gracias a Dios y Este video lo logramos me gusta con nuestra Impresora, GRACIAS WARIS JAMAL..eres GRANDE THANK YOU VERY MUCH
GOD BLESS YOU MY FRIEND, THIS WORKS VERY WELL!!!! G3000 ~~ THE ONLY SOLUTION WITHOUT ANY RUBBISH SOFTWARE!!
Very easy and saved time and money for getting a technician at home
Thank u so much it worked well as when i saw previous videos once i press the power button printer goes off, but on following this method it really worked well
goods...its really. verry thanks. now working my G2000.
Thank you Sir! its working for my Canon G2000 Printer.
Thank you so much. My problem got fixed and now it's working.
100% WORKED FOR ME! 2 THUMBS UP FOR @WARIS JAMAL!