do you have to put coins in the machine one by one so the Inone board counts them as you are adding them or will the Inone board recognize how many coins are already in the coin mech without adding them one by one
This depends on the coinmech and is explained in the instructions included in the kit. For a Dumbmech: turn coin lev mem on in OPTIONS menu and then go into fill/dispense and payout 5 of each coin and feed right back through coin slot so the board sees that change For MDB Changers: in OPTIONS menu, coin lev mem should be OFF by default, if not, set for OFF
@@andreaoamaral You can contact us directly at 667-401-1000 or purchase through one of our resellers. www.dsvendinginc.com/ or thevendingcenter.com/ We currently only have English available for the Polyvend boards.
@@andreaoamaral You can adjust both lines of characters on the display by copying the machine config file to microSD card, editing in notepad and then copying the file back to the controller. The “Insert Money” and “date and time” can be changed to whatever you wish, 16 characters max.
That part is in every AP110 kit and joins the ribbon from keypad to keypad cable. The male header is small, inch long, and is in a small bag inside the larger bag of parts. It’s sometimes hard to find since it is a small part. Please call us if you are still unable to locate this part in the kit and we will send one right away.
do you have to put coins in the machine one by one so the Inone board counts them as you are adding them or will the Inone board recognize how many coins are already in the coin mech without adding them one by one
This depends on the coinmech and is explained in the instructions included in the kit.
For a Dumbmech: turn coin lev mem on in OPTIONS menu and then go into fill/dispense and payout 5 of each coin and feed right back through coin slot so the board sees that change
For MDB Changers: in OPTIONS menu, coin lev mem should be OFF by default, if not, set for OFF
This comments section is jumping! Ten comments in as many years. Anyhow, good video, it's been quite helpful.
I am looking to upgrade my crane snacktron 2 which kit is compatible?
Hi Ryan. Sorry we missed your comment. You will need the National 145/146 OneBoard Kit
What is the whole point of having so many harnesses if use same Validators and coin mech?
Do you have kits for Polyvend PV 6640 machines?
Our Polyvend Kit works for 3000, 4000, 5000, & 6000 Series Machines. Part Number RVMV-POLY-1L. Hope this helps.
InOneTechnology what dealer can I get it? Does it have other languages menu? Thank you for your reply!
@@andreaoamaral You can contact us directly at 667-401-1000 or purchase through one of our resellers. www.dsvendinginc.com/ or thevendingcenter.com/ We currently only have English available for the Polyvend boards.
By the way Can I edit or add customers messages? Thanks
@@andreaoamaral You can adjust both lines of characters on the display by copying the machine config file to microSD card, editing in notepad and then copying the file back to the controller. The “Insert Money” and “date and time” can be changed to whatever you wish, 16 characters max.
good😄
Why the f*** would you not include part #14-0388-00 if you NEED it to complete the install? Your company is ridiculous. 🤬
That part is in every AP110 kit and joins the ribbon from keypad to keypad cable. The male header is small, inch long, and is in a small bag inside the larger bag of parts. It’s sometimes hard to find since it is a small part. Please call us if you are still unable to locate this part in the kit and we will send one right away.