I'm pretty jealous of your all in one jointer/planer/saw. I can't find anything like that here in the US and it would have been a huge help in my small shop.
None of the wheels turn. Didn’t you see him put multiple screws into each “wheel”? Not to mention, the front edge of the chair is not rounded off. Very sloppy and will cause whoever sits in it to have great discomfort.
Lots of hard work, worthy of a better cause. The final result is crappy. Working on that lathe, with the sleeve so close to the turning belt, gave me chills.
Pour renforcer le tout, je n'aurai pas hésité à mettre de gros tourillons pour augmenter la rigidité de l'assemblage. Un peu de colle et des vis, n'ont jamais fait un assemblage durable. La menuiserie à ses règles...
Your some man. I wish I had a quarter of your talent ❤ love from Ireland. That's a class chair. That chair would cost big bucks where I'm from. The detail and the skill is 💯%
Very nyc but how to run by self? Is only for show or run by other person then the chain u hd bin maid it's totally unnecessary, that wheels are enough for the chair
If it was to be merely decorative, I say...pass. But to be sitting on it, absolutely not. This is sloppy and very badly designed. If I'm going to be spending all this time and effort making this piece, I'm going to make it last a 100 years. The back and sitting area, I would have dadoed into the sides of the support legs. Then bored holes through every slat, so that when I put it together with glue I can put in steel rods every 6 to 8 inches through the entire span of wood slats to give it structural strength beyond just glue, and it would be capped with stainless or brass nuts. The back legs held with just glue. That better be a stronger than wood epoxy, or it gets bolts. Front wheels held with glue and a brad...definitely spells out "Made in China". This is so wrong. As an idea, its imaginative. But the bad quality and sloppy craftsmanshipn I have just witnessed...no way I would claim I did that. The one thing I envy him, is that awesome planer...😍. I looked it up, and its Japanese! That means that it is as good as many German machinery. I never had Japanese equipment; just German. Expensive...you have to almost mortgage your soul. But awesome well built and accurate.
![[TH] 2024 PMSL SEA GF D1 | Summer | แข่งที่ไทย ต้องใส่ให้สุด](http://i.ytimg.com/vi/Jkuf7nCS7jI/mqdefault.jpg)
Very unique and creative. I like it. The wood is gorgeous.
Some HIGHLY DANGEROUS working practices here.
BEGINNERS: D O N O T COPY THIS INDIVIDUAL UNLESS YOU WISH TO INCUR A SERIOUS INJURY!!!
Oh very creative cool ....keep go make creative imperfect
My new favorite channel: “Will it roll?”
Very impressive! Kepp doing more of this work. I love your talent!
сделано красиво, но боковое крепление на 3 самореза, весьма сомнительное решение. Если человек 100+ кг сядет на кресло, выдержит ли и как долго.....
Love is❤great job
Very nice work, you have a good imagination!
It is amazing.i haven't seen such an artisan till date.i am really astonished to see the good work.hats off
Kiểu ghế đẹp lạ.
this just kept getting more strange as it went along. I found the first part of the curved wood laminate really neat..modernist.
Hard childhood,
Wooden toys,
Musculin nurse,
Riding windows :)))
I'm pretty jealous of your all in one jointer/planer/saw. I can't find anything like that here in the US and it would have been a huge help in my small shop.
i love these makes but i would realy like to see some colour,
Nice, you should put an engine. 😃
That looks so cool!
Luar biasa mantap gan 👍
Wow ! Wat ongelooflijk mooi . En al die details zo perfect !!!
Poor job of applying glue. Crappy work.
Wie cool ist das denn 👍👍Einfach genial und alles nur Holz 😊😊
Freakin awesome!
Muito louco! Sensacional! Super diferente! Gostei! Ubatuba cidade do litoral norte de São Paulo Brasil 2023.
That's cool man!
Браво мастер.
Unique build.
Thanks you
Suddenly 17:16 a huge timeshift and many screws
It is fantastic idea!
I am to show it to my Russian friends! :)
Really cool
Nuostabus meno kūrinys 👍
Linkiu sėkmės kuriant naujus meno kūrinius.
Linkėjimai iš Lietuvos 🇱🇹
That Sound 😍
Шедевр ! Респект мастеру !👍
В этом есть что-то русское :)
кресло игрока в вот.. или тундру :)
только добавить тефлоновую подложку
и продавать!
I can’t see those front wheels lasting long, looks nice though
None of the wheels turn. Didn’t you see him put multiple screws into each “wheel”? Not to mention, the front edge of the chair is not rounded off. Very sloppy and will cause whoever sits in it to have great discomfort.
Good afternoon my friend
Tek kelimeyle muhteşem ellerine sağlık
WOW!
And why was so much time wasted? Glue and screws, you can only look at it!
It's my opinion...
👍👍👍👍
WOW
Squawk a doodle do
You need to add some kind of a recliner for your feet
Steampunk, I like it.
The wooden tank chair
Expensive push blocks you’re using there. Irreplaceable!
Lots of hard work, worthy of a better cause. The final result is crappy.
Working on that lathe, with the sleeve so close to the turning belt, gave me chills.
Надо было еще сделать, чтоб его можно было катать.
Wow!
Why use wood glue if you’re not going to spread it evenly?
Amateur
Pour renforcer le tout, je n'aurai pas hésité à mettre de gros tourillons pour augmenter la rigidité de l'assemblage. Un peu de colle et des vis, n'ont jamais fait un assemblage durable. La menuiserie à ses règles...
Your some man. I wish I had a quarter of your talent ❤ love from Ireland. That's a class chair. That chair would cost big bucks where I'm from. The detail and the skill is 💯%
Looks a bit over-sized, no?
So, does it operate?
Молодец конечно, но пилил очень долго.
Very nyc but how to run by self?
Is only for show or run by other person then the chain u hd bin maid it's totally unnecessary, that wheels are enough for the chair
😳😳😳🙄🔥🔥🔥👍👍👍
Спасибо 😊
Where's the electric motor?
some very sloppy work here.
Bâclé et laid !
@@elisetaragnat7663😊
Yeah not sure I like it either it’s very weird lol
@@elisetaragnat766325:54
小時候的幻想
it's just decoration?
Looks nice but very weak
Wasted time watching this
Beautiful concept, poor execution
In my workshop you would be fired.
Бессмыслица...
“LACK OF” Woodworking Technology…poor woodworking techniques and design, poor quality, and very poor safety precautions…what not to do.
Wasting Wood.😢
Dolboebizm
If it was to be merely decorative, I say...pass.
But to be sitting on it, absolutely not. This is sloppy and very badly designed. If I'm going to be spending all this time and effort making this piece, I'm going to make it last a 100 years. The back and sitting area, I would have dadoed into the sides of the support legs. Then bored holes through every slat, so that when I put it together with glue I can put in steel rods every 6 to 8 inches through the entire span of wood slats to give it structural strength beyond just glue, and it would be capped with stainless or brass nuts.
The back legs held with just glue. That better be a stronger than wood epoxy, or it gets bolts.
Front wheels held with glue and a brad...definitely spells out "Made in China". This is so wrong. As an idea, its imaginative. But the bad quality and sloppy craftsmanshipn I have just witnessed...no way I would claim I did that. The one thing I envy him, is that awesome planer...😍.
I looked it up, and its Japanese!
That means that it is as good as many German machinery. I never had Japanese equipment; just German. Expensive...you have to almost mortgage your soul. But awesome well built and accurate.
Why?