Another well presented video Mr. O'Flionn, I like the claw for the Mitre saw...I had a wee laugh at the start with Chevy at the Windsor as coincidentally we had POTUS himself Mr Joe Biden at our Windsor Bar (about a half mile from my house) in Dundalk Ireland last week. I got to within 5 metres of him during the visit and was chatting to his Sister Valerie...a lovely woman and I tell you, she is way sharper than most of my tools!...Best wishes and keep up the good work.. A
That is amazing Antomac! I love how people watch from all over the world! I actually lived in Coton England near Cambridge when I was a child. My mother and father took a sabbatical and taught at Cambridge for a year. Very fond memories of that place!
I have the Milescraft cookies but they are infuriating to use as paint points. They will fall over if you do anything more than set a painted piece on it. If you’re trying to paint or reposition or nudge they will fall and piss you off. They are great on their flat sides but the paint point is just impossibly frustrating. There are a million other ways to achieve paint points. Put nails or screws in scraps and flip them. Anything works better than the Milescraft paint point function. Love your videos. Any chance you’d make a video showing how you would build a cubby cabinet for your plastic totes in the background? I’ve seen the few methods and have done 3/4 ply box with 1/2 shelves held in dados. Two containers wide by seven high. Two units and that lets me put them on top of each other or side-by-side. Really helps when a few of the are heavy and many are light.
Thank you so much for sharing that Fearsome Warrior, I love hearing peoples experience with different products! I wonder if placing the cookies on each corner perpendicular to each other might help the stability? Good to know, and sounds like the cookies might be best used for spraying vs. painting. Thanks for the comment and thanks for watching!
People worry about the piece on miter saw moving, or kicking back. No no my friends, it's when your HAND decides to instinctively go WITH the piece. When I saw your hand next to that miter blade I got super nervous and anxiety was kicking hard, like when I look out a window of a 50 story building. I really dislike my miter saw, it gets used for one thing, doing some quick chops of rough lumber, that's it. Other than that, it can pound sand lol, freaking thing wants to murder everyone. Jerk. The Kreg drill guide, I love it. I had to do 5/8 lag bolts into some table legs that were 7" and needed them straight - worked great. I've used it once lol, but you know how it it is. Would do it again too. Also, your hoodie - I'd take out those strings. I have an old hoodie I wear around a lot as well, but those strings are death in a wood shop :)
Oh my gosh, I never thought about those draw strings on the hoodie! Thank you, for sharing that! I can just envision then getting tied up in the saw and bringing my head in close. Geez! I'm kind of with you on the miter saw. I know a lot of shops don't even have them. I tend to do most of my cutting at the table saw, except when I'm doing a bunch of repetitive cross cuts. It's great for chopping down rough lumber, for sure! Thank you so much for sharing!
@@FlynndoggWoodwork Yea those strings, one time and I know nothing about this, never happened but was using my wen track saw (it's for 90's, nothing else and it works, whatever it's cheap and good) my string caught the blade and ripped the string right out. After that, I re evaluated life and wardrobe. No hanging items, baggy, anything that's going to fly into something :) BE SAFE OUT THERE!!
I have both drill blocks and the ten million dollar stick ! The 10mil stick has allowed me to cut some very small pieces and feel safe doing so! Thanks for sharing Bryan!
I’m migrating towards building stuff, I’m trying to post one build video a week. Usually posted on Tuesday’s. Last Tuesday I posted one in case you are interested. Also have one coming up this coming Tuesday. Thanks for watching!
The reason that the "million dollar" tool has three points of contact is not stability, it is because you can nearly always if not always make three points co planar. IE, all three points will be in contact with or could be in contact with the same plane. Of course co planar will be stable but more legs is more stable. The drill guides and I have the Milescraft have a visibility problem. Make a punch in something to mark a drilling point. Then place the guide over that point. You cannot see down into the hole to align your drill tip. If you have a deep enough punch then maybe, otherwise it is hit or miss. I have a flat top ground blade for the same reason. I wonder if you knew this about your saw. I have a SS JSS as $4k is a lot too rich for my blood. But, if you have the saw powered on but not running and you touch a metal object to the blade and the table top at the same time, the lights on the switch will blink. Same thing with your finger. That is a warning that if you turn the blade on you will have a brake actuation. I could not/would not buy the million dollar thingy as the shipping cost darn near equalled the item cost and it just did not set right with me. LOL
Thank you so much for sharing this information Jeff, very helpful to everyone! I did know that about the saw. Thank you so much for sharing all this information all quite valuable for people to hear!
I've been using that Freud FTG blade for years to cut flat bottom groves and dados. I have a dado stack, but find the rip blade cuts absolutely flat, no "bat wings" and cuts a full 1/8" wide. I recently had it re-sharpened at Ridge Carbide and it's as good as new. Thanks
That’s great to know Rich and Peggy ! Sounds like this blade will last for years! I have a CMT combination that I usually have in the saw, but absolutely love the freud so far! Thanks for watching!
I like your style; no senseless chatter and to the point quickly. I was impressed enough that I bought a couple of the tools for myself and my sons. Keep up the good work.
I've never had a problem making dadoes with an Alternate Top Bevel blade. The little grooves it creates gives glue a place to settle, thus creating less squeeze-out, while still providing plenty of holding power.
Grooves? Hmm, you are onto something. I guess if it's not facing out and visible, the grooves would provide more holding power for glue, or epoxy, etc. Nice point man.
It seems there are 2 caveats to both drill guide blocks. Common complaint with the mouse guide was holes not being perpendicular AND some drill bits being too large for the size hole; Kreg also had issues with some bits too large for hole. After careful consideration, decided the Kreg would be the better fit. Nice video, could stand to be shortened up by a few minutes (sorry, I'm after all folks to keep their videos at or under 10 mins. where possible).
Haha! I agree with you on all points. I'm leaning towards the Kreg as well! I'm also trying to shorten the videos too. I find myself being a little too long winded at times! Thanks for the comment and thanks for watching Michael!
I believe it’s a matter of how new to woodworking you are. The seasoned woodworker would rather see shorter offerings. However, for those of us starting out, (Like me) I’m happy to hear every speck of experience you can provide. And we all have the option of changing channels. I have never been disappointed with anything you’ve posted. Thank you!
@@louislandi938 You are too kind. I appreciate that. I also like having all these comments on here from beginner questions (people who I can answer questions from) and the seasoned woodworker (Those who can answer my questions)! Thanks for watching and your nice words! I truly appreciate it!
I’ve got both of those drill blocks and I use them for different tasks. The Milescraft one has a cut out down the middle that sits on the corner of a board and allows you to drill directly into an outside corner. The Kreg has a step on it that grips the side or end of a piece of 3/4” material and you can go square into the end grain. I’ve used both as doweling jigs before lol. Great video as always Bryan!
Great information Mr Griffin! Someone else mentioned that as well. I wish I would have know that before creating the video. There were literally no instructions that came in the packaging! Thanks for sharing!
@@FlynndoggWoodwork call me Chris bro. I discovered the Kreg one by accident lol. I couldn’t figure out what the ridge on the milescraft one was for for the life of me lol. Then it dawned on me when I was messing around in the shop one day and went on a corner drilling spree lol.
Another “5 tools you need” video. Pretty sure this topic has been covered ad nauseam 🤦♂️
Another well presented video Mr. O'Flionn, I like the claw for the Mitre saw...I had a wee laugh at the start with Chevy at the Windsor as coincidentally we had POTUS himself Mr Joe Biden at our Windsor Bar (about a half mile from my house) in Dundalk Ireland last week. I got to within 5 metres of him during the visit and was chatting to his Sister Valerie...a lovely woman and I tell you, she is way sharper than most of my tools!...Best wishes and keep up the good work.. A
That is amazing Antomac! I love how people watch from all over the world! I actually lived in Coton England near Cambridge when I was a child. My mother and father took a sabbatical and taught at Cambridge for a year. Very fond memories of that place!
Fantastic video mate. Great tools that no one thinks of! I am picking up a FastCap 10 Million Dollar Stick as we speak! Thanks for the advice!
My pleasure KJH Woodworking! I appreciate your compliments! Love the 10 Million dollar stick! :).
@@FlynndoggWoodwork purchased 👍👍
I have the Milescraft cookies but they are infuriating to use as paint points. They will fall over if you do anything more than set a painted piece on it. If you’re trying to paint or reposition or nudge they will fall and piss you off. They are great on their flat sides but the paint point is just impossibly frustrating. There are a million other ways to achieve paint points. Put nails or screws in scraps and flip them. Anything works better than the Milescraft paint point function.
Love your videos. Any chance you’d make a video showing how you would build a cubby cabinet for your plastic totes in the background? I’ve seen the few methods and have done 3/4 ply box with 1/2 shelves held in dados. Two containers wide by seven high. Two units and that lets me put them on top of each other or side-by-side. Really helps when a few of the are heavy and many are light.
Thank you so much for sharing that Fearsome Warrior, I love hearing peoples experience with different products! I wonder if placing the cookies on each corner perpendicular to each other might help the stability? Good to know, and sounds like the cookies might be best used for spraying vs. painting. Thanks for the comment and thanks for watching!
I got a finger I can't believe hasn't fallen off from over-use. I wouldn't taken anything for it.
Haha! 😂 love it! Thanks for watching Brian!
Another great video great tips thanks for sharing as usual
You're welcome Jim! Thank you for watching!
Where do you get your magnets you hold your tools up with with
I've left a link below where you can check out the ones I've used before. Thanks for watching!
amzn.to/3qTkT64
People worry about the piece on miter saw moving, or kicking back. No no my friends, it's when your HAND decides to instinctively go WITH the piece. When I saw your hand next to that miter blade I got super nervous and anxiety was kicking hard, like when I look out a window of a 50 story building. I really dislike my miter saw, it gets used for one thing, doing some quick chops of rough lumber, that's it. Other than that, it can pound sand lol, freaking thing wants to murder everyone. Jerk. The Kreg drill guide, I love it. I had to do 5/8 lag bolts into some table legs that were 7" and needed them straight - worked great. I've used it once lol, but you know how it it is. Would do it again too.
Also, your hoodie - I'd take out those strings. I have an old hoodie I wear around a lot as well, but those strings are death in a wood shop :)
Oh my gosh, I never thought about those draw strings on the hoodie! Thank you, for sharing that! I can just envision then getting tied up in the saw and bringing my head in close. Geez! I'm kind of with you on the miter saw. I know a lot of shops don't even have them. I tend to do most of my cutting at the table saw, except when I'm doing a bunch of repetitive cross cuts. It's great for chopping down rough lumber, for sure! Thank you so much for sharing!
@@FlynndoggWoodwork Yea those strings, one time and I know nothing about this, never happened but was using my wen track saw (it's for 90's, nothing else and it works, whatever it's cheap and good) my string caught the blade and ripped the string right out. After that, I re evaluated life and wardrobe. No hanging items, baggy, anything that's going to fly into something :)
BE SAFE OUT THERE!!
Will do, and thanks for reminding me about that!
I have both drill blocks and the ten million dollar stick ! The 10mil stick has allowed me to cut some very small pieces and feel safe doing so! Thanks for sharing Bryan!
That's awesome Mike! I really like that 10M dollar stick. It is something that I know is going to get used! Thanks for watching!
The tri grips are filled with very fine sand. Don’t ask me how I know. Thanks Brain.
Oh Boy…. Sounds like a track saw or circular saw cut gone wrong! 😂. Thanks as already for watching Paul!
@@FlynndoggWoodwork router
Do you build stuff or just google deep ?
I’m migrating towards building stuff, I’m trying to post one build video a week. Usually posted on Tuesday’s. Last Tuesday I posted one in case you are interested. Also have one coming up this coming Tuesday. Thanks for watching!
I knew that all these existed lol. :)
That’s awesome! I knew some of them had existed but definitely didn’t have them! Thanks so much for watching Scotty!
pocketbooks is a wallet
Thanks so much for watching!
$10,000,000 but not the thumb
Love it, I think I might even go a little lower than that. But as soon as I did it I would be MAD! Thanks for watching Sean!
Great information 😊
Thanks so much Greg! I appreciate that and thanks for watching! :)
The reason that the "million dollar" tool has three points of contact is not stability, it is because you can nearly always if not always make three points co planar. IE, all three points will be in contact with or could be in contact with the same plane. Of course co planar will be stable but more legs is more stable. The drill guides and I have the Milescraft have a visibility problem. Make a punch in something to mark a drilling point. Then place the guide over that point. You cannot see down into the hole to align your drill tip. If you have a deep enough punch then maybe, otherwise it is hit or miss. I have a flat top ground blade for the same reason. I wonder if you knew this about your saw. I have a SS JSS as $4k is a lot too rich for my blood. But, if you have the saw powered on but not running and you touch a metal object to the blade and the table top at the same time, the lights on the switch will blink. Same thing with your finger. That is a warning that if you turn the blade on you will have a brake actuation. I could not/would not buy the million dollar thingy as the shipping cost darn near equalled the item cost and it just did not set right with me. LOL
Thank you so much for sharing this information Jeff, very helpful to everyone! I did know that about the saw. Thank you so much for sharing all this information all quite valuable for people to hear!
I've been using that Freud FTG blade for years to cut flat bottom groves and dados. I have a dado stack, but find the rip blade cuts absolutely flat, no "bat wings" and cuts a full 1/8" wide. I recently had it re-sharpened at Ridge Carbide and it's as good as new. Thanks
That’s great to know Rich and Peggy ! Sounds like this blade will last for years! I have a CMT combination that I usually have in the saw, but absolutely love the freud so far! Thanks for watching!
Ribbed for your pleasure, Dogg. You've given us a good start to the weekend.
Haha! There are too many jokes I want to say, but don't! Thanks for watching The Meat! :)
I'm so proud of you :)
Haha! Thanks Brad! :) Thanks for watching!
@@FlynndoggWoodwork
Keep up the good videos.
I like your style; no senseless chatter and to the point quickly. I was impressed enough that I bought a couple of the tools for myself and my sons. Keep up the good work.
Thanks so much John, I appreciate it! Hope you and your son's like the tools! I hope my sons get into stuff like woodworking when the turn older!
Thanks for always being to life tools that I always don’t know about
My pleasure, I'm having a lot of fun doing it too! Thanks for watchign LordHog!
I've never had a problem making dadoes with an Alternate Top Bevel blade. The little grooves it creates gives glue a place to settle, thus creating less squeeze-out, while still providing plenty of holding power.
That’s an excellent point Scotty. That makes total sense! Thanks so much for sharing and thanks for watching!
Grooves? Hmm, you are onto something. I guess if it's not facing out and visible, the grooves would provide more holding power for glue, or epoxy, etc. Nice point man.
Thanks. These are all going on the shopping list.
Glad you liked it Hotspur423! Thanks for watching!
It seems there are 2 caveats to both drill guide blocks. Common complaint with the mouse guide was holes not being perpendicular AND some drill bits being too large for the size hole; Kreg also had issues with some bits too large for hole. After careful consideration, decided the Kreg would be the better fit. Nice video, could stand to be shortened up by a few minutes (sorry, I'm after all folks to keep their videos at or under 10 mins. where possible).
Haha! I agree with you on all points. I'm leaning towards the Kreg as well! I'm also trying to shorten the videos too. I find myself being a little too long winded at times! Thanks for the comment and thanks for watching Michael!
I believe it’s a matter of how new to woodworking you are.
The seasoned woodworker would rather see shorter offerings.
However, for those of us starting out, (Like me) I’m happy to hear every speck of experience you can provide. And we all have the option of changing channels.
I have never been disappointed with anything you’ve posted. Thank you!
@@louislandi938 You are too kind. I appreciate that. I also like having all these comments on here from beginner questions (people who I can answer questions from) and the seasoned woodworker (Those who can answer my questions)! Thanks for watching and your nice words! I truly appreciate it!
I’ve got both of those drill blocks and I use them for different tasks. The Milescraft one has a cut out down the middle that sits on the corner of a board and allows you to drill directly into an outside corner. The Kreg has a step on it that grips the side or end of a piece of 3/4” material and you can go square into the end grain. I’ve used both as doweling jigs before lol. Great video as always Bryan!
Great information Mr Griffin! Someone else mentioned that as well. I wish I would have know that before creating the video. There were literally no instructions that came in the packaging! Thanks for sharing!
@@FlynndoggWoodwork call me Chris bro. I discovered the Kreg one by accident lol. I couldn’t figure out what the ridge on the milescraft one was for for the life of me lol. Then it dawned on me when I was messing around in the shop one day and went on a corner drilling spree lol.
@@Griffinwoodworks Love it Chris! I'm totally going to use it for that purpose! Thanks for sharing!