Mini dumper from 1975. Honda G65 motor, 6.8 HP with reduction gear 1:2, centifugal clutch and a dual coil DIY ignition system. I use it as a motorized wheelbarrow.
It is suited for sturdy dry flat lands. In muddy slopes this thing is a death trap. Also.. it is propelled by its back wheel so if you drive it with the wheel pushing, you have to constantly adjust its course. That is why I reverse the drive wheel and sit in the container.. If the wheel is pulling it is very stable.
It was produced during the 70s by a mechanical workshop that sold these to concrete contractors. They were originally used to transport concrete from the concrete truck to where it were poured. The construction is simple and apart from what is seen in the video, there is not much secrets about the design. The propelling wheel, motor, gears and the handlebar is mounted on an infinite rotating column, much like a bumper car. Therefore it is very maneuvrable, allthough unstable in forward direction as it is back wheel steered and propelled. That is why I rotate the wheel 180 degree and sit in the bucket when driving it without load.
Coolest rig I've seen today.
thats some impressive image stabilization on that phone..
oh yeah.. nice barrow too
отличный экземпляр. все просто и удобно, ненужно заднего хода. есть опрокидыватель. лайк
Ахмед Жалгасов Sorry, I just understand English, Swedish and a litte german.
make a video of how you did that the motor with the wheel turns because it is not clear
muy interesante
Hi, this is nice and simple design. What about traction if there is only one wheel? Is is it OK?
Have you any video, where are some hills?
It is suited for sturdy dry flat lands. In muddy slopes this thing is a death trap. Also.. it is propelled by its back wheel so if you drive it with the wheel pushing, you have to constantly adjust its course. That is why I reverse the drive wheel and sit in the container.. If the wheel is pulling it is very stable.
Hi ! Great ! How do you transfer the power to the powered wheel? Thanks!
shond It is sprockets and two chains between the gearbox and the wheel that forms a reduction gear. And the gearbox is a 2:1 ratio centrifugal clutch.
Great mini dumper dude... 👍👍👍
How it made?
It was produced during the 70s by a mechanical workshop that sold these to concrete contractors. They were originally used to transport concrete from the concrete truck to where it were poured. The construction is simple and apart from what is seen in the video, there is not much secrets about the design. The propelling wheel, motor, gears and the handlebar is mounted on an infinite rotating column, much like a bumper car. Therefore it is very maneuvrable, allthough unstable in forward direction as it is back wheel steered and propelled. That is why I rotate the wheel 180 degree and sit in the bucket when driving it without load.
@@andreasnilsson2304 i see...
Thank you for your answer...
Now i know that mini dumper was not DIY item...
это для меняяяяя
Handsome! Just do not carry manure !!!