Tractor Splitting Dolly Project

In this video, Dad(Chris) starts on the project of making a splitting dolly to be able to split apart a tractor. We started with swivel casters at the bottom, mounted to 1" steel plate which then was welded to 1" all thread. A 5x5 3/8" wall square tube will hold the all thread. The square tube then supports 4x4 1/4" angles for the uprights that are 27 3/4" long. Then mounted to that is 2x3 3/8" to be mounted to the block. This was over several weeks and a lot of time but it should hold up to any future projects on the channel.
#withamfamilyfarm #easternkansas #shopwork #tractordolly
Check us out on Facebook: / withamfamilyfarm
Twitter: @WithamFarm
TikTok: www.tiktok.com/@withamfamilyfarms2012
Music by Epidemic Sound

[@don66hotrod94]

Very much enjoy your Case videos. Show those old workhorses some much deserved love.

[@WithamFamilyFarm]

Thanks! We are trying our best to.

[@dxksfvya8494]

Enjoyed the video, like your shop looks like mine. ha.

[@joeherndon5815]

That split stand definitely built to last many generations. I have watched several of these builds getting ideas to build one myself thanks for the video

[@WithamFamilyFarm]

We built it to hopefully hold the 1570. But one thing with our design is we done swivel casters and that’s not necessary with the use of the all thread.

[@dankreoger611]

Looking forward to the next step.

[@WithamFamilyFarm]

We are too! Hopefully this weekend we will have it split apart!

[@KiwiJim13]

👀🙄🐾👍

[@greaterdesigns1]

What brand of 1" bit is getting through that steel?

[@WithamFamilyFarm]

Masterscraft from Menards

[@greaterdesigns1]

@@WithamFamilyFarm Really?! I wouldn't have thought the quality would have been good enough for that thick of steel. I guess I need to have more faith in Mastercraft. Thanks for the reply.

[@Oliver-kv2mm]

We can do without the stupid music.