This video is coming out at the right time I have my CVT system on order thru the throtl site can’t wait for it to get here all I need are my air struts and the journey to the bagged life will begin for me I’m super pumped I hope I can handle the install
That’s the sickest RX8 ive seen yet, love it, they start at prices in the hundreds in the UK at the moment (for an entry condition car)....that one is done just right in my opinion.
Always enjoy your content! Always give a like! That being said, I would have gone a different route on the A-arm attachment for the level sensor. Rather than drill the control arm and possibly weaken it, I would have made a split clamp bracket attachment. I know, too late now, but for future installs....Keep the great content coming. Really enjoy the project builds.
Is there any possibility of of laser level? Less moving parts and in off-road vehicles hyper exstending those plastic arms and damaging the sensors seems likely occurance?
So I'm trying to buy air ride but I don't know much about it I watch all your guys videos on RX8 build but its kinda hard to see what u got to make this work could you help me out and tell me what all did you bye for accuair suspension pl. because I really like the set up vary awesome job on the RX-8 build tho sick!!
@@@mickeyandrade3435 Do you think the bag will rip in temps around -26 degrees Fahrenheit from being used? So far, that's the lowest we've got here in Wisconsin. lol
Just got my CVT unit also just waiting on my air struts. Although I was wondering where you guys got those brackets for the hight sensors from? And also would you recommend I get some of those or do like you did in the video and just buy some metal or aluminum and make my own?
Love the video but to comment on the air system my issue with them is the price there overpriced for what they are I could replace all the bags and both air tanks the compressor and most of the airlines in my semi for what bags cost for a car
This video is coming out at the right time I have my CVT system on order thru the throtl site can’t wait for it to get here all I need are my air struts and the journey to the bagged life will begin for me I’m super pumped I hope I can handle the install
You got this! Hit us up with ANY questions!
Awesome that will be much appreciative just take my time and do it right the first time it’s going to be amazing thanks guys
I really appreciate this channel explaining exactly what they are doing in detail. It helps me so much
That’s the sickest RX8 ive seen yet, love it, they start at prices in the hundreds in the UK at the moment (for an entry condition car)....that one is done just right in my opinion.
I’m still watching this video in Sept 2024. Helped me in 2022 install Accuair/ w height sensors on our Maserati Quattroporte GT. No issues! Thankyou!
Amazing. That wide body looks sooo good on that RX-8. Nice work boys !!!
I can watch Ricky and Mickey all day.
Nice video painting car parts in my garage with no mask sitting in my chair breathing in the paint watching throtl 🤟🏾👍🏾😂
I want to see a RX-7 track day ! Maybe you should wait for Ricky's wife rx7 tough ;) (sorry completly forgot her name ! )
Helen
Always enjoy your content! Always give a like! That being said, I would have gone a different route on the A-arm attachment for the level sensor. Rather than drill the control arm and possibly weaken it, I would have made a split clamp bracket attachment. I know, too late now, but for future installs....Keep the great content coming. Really enjoy the project builds.
Still waiting on MR2 progress
Throtl ViP squad Good morning Guys more RX8 content today awesome 👍😊
Do a hondaaaaaa boysss
Somehow I thought you were starting to levitate but it was just the lift lowering the car
Hell yeah track day must do a track day episode.
Next bro-down show-down should be all of you at the track duking it out over a bunch of challenges. Pick one car of yours and go at it.
Battle of the rx7s😳😱
there needs to be a TRACK DAY!
You guys should do a clean Honda build!
Kroil also works good as a cleaner for degreaser
Hope we'll do so too. install the best air suspension ever. Thanks for sharing your inspiring videos.
Didn't realise there were sooo many structural engineers watching TH-cam nowadays!
norafirestorm - right!?!? Lol
The RX-8 is so nice🤤
Awesome job! First class work!
looking forward to that FD special trackday
Is there any possibility of of laser level? Less moving parts and in off-road vehicles hyper exstending those plastic arms and damaging the sensors seems likely occurance?
Aerokroil...Mikey puts that s#!+ on everything lol!
Why didn’t you shorten the level sensor loom from inside the trunk, rather than having your joins outside to the elements?
This dude had accuair on his Tacoma xrunner.... id love to do that on a srunner but they are rare!
So I'm trying to buy air ride but I don't know much about it I watch all your guys videos on RX8 build but its kinda hard to see what u got to make this work could you help me out and tell me what all did you bye for accuair suspension pl.
because I really like the set up vary awesome job on the RX-8 build tho sick!!
What about using air suspension in winter?
What about it?
@@@mickeyandrade3435 Do you think the bag will rip in temps around -26 degrees Fahrenheit from being used? So far, that's the lowest we've got here in Wisconsin. lol
@@tunerfromhell1302 - No. Use Universal Air Suspension struts
what are the names of those red rims @29:06
@mickey any suggestions on a flex fuel pump for a Honda Civic?
Is there a list of the different management systems like the e-level that are compatible with the cvt!?
Just got my CVT unit also just waiting on my air struts. Although I was wondering where you guys got those brackets for the hight sensors from? And also would you recommend I get some of those or do like you did in the video and just buy some metal or aluminum and make my own?
Did the rod ends come with the height sensor kit
Would air lift performance struts be good for a bagged setup for track use and weekend driving?
Is it possible to buy those brackets for the hight sensors? If not what would be the best substitute?
love your vidss 😍
Where is the great 335i wagon
You need angle iron it acts just like a metal brake
What bags and brackets are you using
Great vid!!! Loved the detail! Keep it up!
Hi, Great Video. My name is Rey. Where are you guys located at. What town or State.?. I’m in Southern California.
Damn that rx8 is good lookin
That thing is NAAASTY!! 😍
Do a teggy🙏❤️you guys are amazing mechanics👏
Can someone explain rage orange Porsche in the background? It’s been there forever.
Drilling that arm would be a huge weak spot, no? Wouldn’t a welded stud or a camp on band be a much better option?
The tiny size of the hole will not affect the strength of the control arm! 👍🏻
They definitely should make a worm style [hose] clamp for this.
Is Rick a US Marine?
What an amazing detailed video!
I spied with my two eyes a blue nos bottle today.
🤫
Why is TJ's supra ALWAYS on the lift?
Mazda rx 8. Amazing!!! Where are you from, guys?
Rx8 are my sekind favorite car rx7 is my favorite car can you do more vids on them
Micky, what's with that red mark behind your ear?
What size those rims
Is that upper control arm touching the bag at 11 mins ish
Gav Nott - Yes, but the bag is completely deflated. When air is in the system it does not touch.
How do these guys with car TH-cam videos get so much money to play with?
Does someone know some youtuber who bulids toyota celica? Just want to know bucause i love that car😍
I can't stop staring at the beard
Love the video but to comment on the air system my issue with them is the price there overpriced for what they are I could replace all the bags and both air tanks the compressor and most of the airlines in my semi for what bags cost for a car
Make a "M3 e46 build in 10 mins" video! 😭
Not a bad idea
Mickey styles, Rickyspec
will you guys be selling the Switch speed?
We sell Switch Speed as well as EndoCVT. DM @throtl_parts on IG or e-mail us for more info!
Hey i have a Toyota Celica 1992 it's my project if u guys want for on it
No way I’d drill even a small hole in a control arm for anything...especially this. Sorry, but Sketchy Spec in my book.
Eric Schutt agreed. This is as dodgy as it gets. Small hole or large hole, it’s now compromised.
Eric Schutt are you calling MickeySpec sketchy? So what would the alternative be?
Tom Micky they should make a mount that fits around the link.
john is so lucky it is so sick of a build.
Day 350,000,0000,000 without a BMW e46 update at least. Bring out those beamers
Good afternoon
Dude! Them adds tho
Great vlog
mod list please
Track day!!!!!!!!
Yee yee boyz
Airride or nothin
Boom 💥
Nice
Yeet
🙏
well done!
Weeepaaaaaa 🇵🇷🇵🇷🇵🇷
RickyStyleZ
need new exhaust pipes
💪
plz no "that what she/he said"
G00d
Airlift 3p is so much better, those height arms are junk
3p is a pressure based system. 3H is a better comparison, but doesn’t offer in tank compressor like the endo cvt.
Frank Fratta - And 3H is an inferior copy of the eLevel brought to market over a decade after eLevel.
u have camera to close to u face. film car insted of face
First!