Atwood levelegs not responding. Help! (Update Links In Description)
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- I can't get the system to reset or respond. Done everything I have looked up and can think of.
Update 1: • Atwood levelegs Not Re...
Update 2: • Atwood levelegs Update...
Watch all my videos to see what my problem was.
They are junk
I have the same problem so please tell me what's the fix, I had a new motor.
Going to try to ship controller and key pad this week. I'm not sure how long the whole process takes, but I will post an update. I did test my jacks and they all work. I put a power probe to the one indicated by the system and it works just fine.
Barry do you have acces to a replacement motor? I have one that is not in good shape.
the 2 blinks mean u have a broke jack. take it of and check the spur gears and the gear pins. i bet u broke 1 or the other
Thanks for the input. I will be checking further since the console unit and key pad checked out fine. The jack does go up and down under independent 12 volt power.
@@2lotony that's always possible. even manual with a drill it will do that. under pressure it will not move because of the clutch sensor. i have had this happen several times and found either a shear pin or a broke spur gear. i just had to buy another jack because it broke 2 spur gears.
@@stevefitzgerald9193 I will check it out. Thanks
@@stevefitzgerald9193 Where did you find a new jack? I thought they were discontinued.
@@blueterrace i have 2 10,000 for the rear. will sell 1. they are discontinued. i bought some up awhile back
I have the same problem on my 2005 Fleetwood bounder it is a rear jack that is acting up haven’t tried it yet but I found a forum where someone just manually went underneath unplug the motor and spun the motor with a cordless drill back-and-forth to break it loose and supposedly it works I will try it tomorrow
I have the same problem. I swapped the rear and front cables on the controller, the problem is transferred from rear to the front. So that indicates, most likely, there is something wrong with the rear left leg. The problem is, it is next to the generator and there is not much space to take it out.
This just happened to me.
My brother in law is having same issue just different jack but all Jack's r working as long as u use them manually I think it's a sensor issue.
Having the same issues. Worked fine until I took the rig in to get new rear tires. You're installer said " your mh is ready, but we have an alarm on the right rear jack although all jacks are retracted." I'm Thinking that they used the jacks to get tires off the ground and over extended them. ???... Anyway, got a new touch pad on it's way, hoping that maybe, just maybe, that will solve my problem (for now)...
Did the new panel work?
we are having the same issue, is there a solution to this problem?
Check out Gamma Electronics. Only solution beyond buying a new system at 3 to 4 k, I have been able to find so far. No parts or support that I can find.
@@2lotony thank you for your response, I will check it out.
Found controlrepair.com they will still take your old control unit and fix it if possible for a little over 1k. Gonna give it a try. Found a repaired one for 2,600.00. Ouch!. With the Gamma controller you lose some features but it still is a very inexpensive alternative.
update?
@@mehmetdtx
Nothing to report yet. Shipped out unit, waiting for a diagnosis.
@@2lotony did it work after the repair?
@@mikeclausen8857 If you caught my last video, after cleaning and tightening the main power wire to the breaker, everything has worked good so far.
@@2lotony that’s great! How much did they charge you for the controller repair?