Boss doodz, uno may marajaw na flyball sa 1.2k center spring ug 1.2k pud nga clutch spring . mao man ge recommend sa tag iya sa pulley set . 78kg d ay ko boss dodz ako topspeed kuman kay 112 ra 10/11 an ako flyball kuman . bsin jaoy emu ma recommend na kabog aton nga flyball. stock gearings rako boss an ako da lamng ge pulihan an pulley set the rest stock na .salamat bossing
@@emir4820 Installing a lighter flywheel on your scooter can make the engine louder due to: # Mechanical Changes 1. *Increased engine RPM*: Lighter flywheels allow the engine to rev faster, producing more noise. 2. *Altered power delivery*: Lighter flywheels can cause the engine to produce more power in the higher RPM range, leading to increased noise. 3. *Reduced rotational mass*: Less mass means less inertia, allowing the engine to accelerate faster and produce more noise. # Acoustic Factors 1. *Increased vibration*: Lighter flywheels can cause more vibration, leading to increased engine noise. 2. *Changed resonant frequency*: The lighter flywheel alters the engine's resonant frequency, amplifying certain sound waves. 3. *More audible piston slap*: Lighter flywheels can make piston slap (the sound of pistons moving up and down) more noticeable. # Potential Causes 1. *Improper installation*: Incorrect flywheel alignment or tightening can cause vibrations and noise. 2. *Incompatible flywheel*: Using a flywheel designed for a different engine model or type can lead to noise issues. 3. *Worn or loose engine components*: Pre-existing engine wear or loose components can exacerbate noise problems.
sir dodz, tanong ko lang anong pwede kong palitan sa set ko? stuck na sa 105 yung pcx 160 ko, 1200 center 1k clutch 10-12 flyball, tsmp pulley 1.5mm washer. naka jvt v3 pipe remap
Sir unsay set up nimo pang gilid nimo sir gusto unta nko pud same sa imo set up sir, ask nlng pod kos imo fb acct nimo Sir maka follow pod ko hehe taga cabadbaran rako sir
Iba ka talaga boss dodz 👊
Salamat paps 😊
saan mo nabili handle bar mo po?
Boss doodz, uno may marajaw na flyball sa 1.2k center spring ug 1.2k pud nga clutch spring . mao man ge recommend sa tag iya sa pulley set . 78kg d ay ko boss dodz ako topspeed kuman kay 112 ra 10/11 an ako flyball kuman . bsin jaoy emu ma recommend na kabog aton nga flyball. stock gearings rako boss an ako da lamng ge pulihan an pulley set the rest stock na .salamat bossing
Nara oh 🔥
Salamat paps 😊
astig ng pixie mo lodi...shout out po fr binalonan, pangasinan
Hillo lods
Ang pcx 160 radiator ug click 160 parihas ra?
@@ArtemzThebarber same ra bagan
Sir dodz ano po recommend na bola at spring arangkada at dulo naka cvt set po airblade 160 ung motor salamat
Boss saan ang puwesto ni boss emjay dito sa manila?
Sir Dodz ano po recommended nyo na flyball weight sa all stock na pcx160 po? Sana manotice and ride safe always po Sir Idol.
10/12 combi malakas yan 😁 try mo
@@143dodzmay dulo rin po ba tong 10/12 combi na bola sir if ever bola lang papalitan?
@@charleslumba1593wala dulo yan if yan lang papalitan mo.
@@charleslumba1593madame kapa palitan dyan kung gusto mo lumakas talaga
105 kg 1200 center tas clutch spring 2k..bola 10-11 rs8 pulley regroove na bell stick tas tas stock lining ..my suggest ba kau sir na mas ok
lakas! stock ba sir?
Hi brother What would you recommend for pcx 125? Help me Pls🙏😊
Use an aftermarket pulley that has an angle of 13.8. 10g or 9g straight. 1.2k rpm center spring
@ brother Wouldn't 10 and 9 grams be light for 125 cc?🙂🙏
@@emir4820 try 12 and 10 then
@@miming2021 When I install these weights, the engine starts to run very loudly.
@@emir4820 Installing a lighter flywheel on your scooter can make the engine louder due to:
# Mechanical Changes
1. *Increased engine RPM*: Lighter flywheels allow the engine to rev faster, producing more noise.
2. *Altered power delivery*: Lighter flywheels can cause the engine to produce more power in the higher RPM range, leading to increased noise.
3. *Reduced rotational mass*: Less mass means less inertia, allowing the engine to accelerate faster and produce more noise.
# Acoustic Factors
1. *Increased vibration*: Lighter flywheels can cause more vibration, leading to increased engine noise.
2. *Changed resonant frequency*: The lighter flywheel alters the engine's resonant frequency, amplifying certain sound waves.
3. *More audible piston slap*: Lighter flywheels can make piston slap (the sound of pistons moving up and down) more noticeable.
# Potential Causes
1. *Improper installation*: Incorrect flywheel alignment or tightening can cause vibrations and noise.
2. *Incompatible flywheel*: Using a flywheel designed for a different engine model or type can lead to noise issues.
3. *Worn or loose engine components*: Pre-existing engine wear or loose components can exacerbate noise problems.
Sir anu po maganda set sa jvt pulley set naka 13g straight 1200 center spring, 1k clutch spring stock gearing
Try mo 10g straight mabigat masyado yang 13g
What if 11/12 grams?@@kenechipalabrica9602
Papz puwede bang bumili sayo ng jvt pipe at throttle body na kapareho ng sayo? How much papz? Emil Narciso ng Dasol,Pangasinan. Subscriber mo
asa mana dapit bay
Hello po pwede po ba magtanong ng set cvt mo po
Grabe ang lakas ng pcx mo Sir Dodz
Salamat paps 😊
Samantalang yung sken 105 lng allstock ,😢 pa reveal nman ng set mo idol ng magaya para di maiwan sa byahe
Abangan
boss ano gearings mo?
Boss dudz. Bkt matumal kna mag upload ng Vidz.?
Ituloy mo lng idol.❤
Long time no upload Lodi
@@Harry11999 thanks paps
sir dodz, tanong ko lang anong pwede kong palitan sa set ko? stuck na sa 105 yung pcx 160 ko, 1200 center 1k clutch 10-12 flyball, tsmp pulley 1.5mm washer. naka jvt v3 pipe remap
Matigas mxdo centerspring mo. Wag mo gayahin si doodz naka TB yn n 32mm
try mo sir .5mm washer or wala, mas maganda dumulo yan kesa sa 1.5mm na maganda pang arangkadahan. balitaan mo ako sir hehe
Boss dods pasagot honda click 150 nako dol nahpalit power pipe backpire idol ano sulotion naka recet ecu tps lang ko
Wala ny solution taman sa ma remap na
Pabulong naman dyan gamiy kong set up sa pcx mo
Pcx 160 din gamit ko
paps sa click 160 ano ma recommend mo ? kahit stock gearings lang paps ..
@@BranwellBlairVillahermosa kahit gilid lang malakas nayan
@@143dodzanu ma recommend mo na bola paps ?
@@143dodznaka HIRC po ako na pulley set ..
Suggest naman boss 1200 center 1500 clutch kalkal pulley set tsaka bell 9/10 bola tsaka 14t gear 130 top 61kg rider pano pa mapapataas yan boss?
taas ng clutch mo try mo stock clutch tapos 10g straight, tsaka nasa pipe din yan
Pipe, remap, TB 32mm
Ano combination ng pang gilid mo sir?
Pulley ko dati na benta. 8/11g honda beat center sprinf
idol ano magandang combi pag kalkal pulley tas naka 1k center?
@@kbslice-ht6dt 10/12 try mo
Paps anong rpm ng center spring at clutch spring mo?
@@hanzheinricholvidado4766 stock clutch. 1.2k center pang honda beat twh brand
@ salamat paps
More vlogs
Saba nga po. Please encourage me paps 🤦😂
boss okay ba 1500 both spring tapos 9/11? may angkas ako lagi
naka 14t pcx ko
@@REYMARKENGAYMANANSALA gahi ra kaayo ng 1.5k tanan
@@143dodz ano magandang set boss??
Boss jvt pulley pa dn ba gamit mo?
Sir unsay set up nimo pang gilid nimo sir gusto unta nko pud same sa imo set up sir, ask nlng pod kos imo fb acct nimo Sir maka follow pod ko hehe taga cabadbaran rako sir
@@jekstv7956 naa sa akong previous video paps
up
Salamat paps 😊
dodz bay ok lng ba na second na pcx ang akong kuhaon?
@@arnelpajaron2976 oo okay kaayo paps.
huwag gawing race track ang public road.