great ideas, i wouldn't use my bare fingers to hold metal objects i was drilling, saw too many tuff guys doing this and ended up with severe cuts or even a detached finger, especially the bottle cap hack. not a disser, but some hacks would be easier to go out and buy dollar tree item, but hey, it's fun tinkering, i do that too>
САМЫЙ ДУРНОЙ СПОСОБ ОБТОЧИВАНИЯ НОЖНИЦ. СОВСЕМ ИСПОРТИЛ НОЖНИЦУ. НОЖНИЦЫ ОБТАЧИВАЕТСЯ ТОЛЬКО С ОДНОЙ СТОРОНЫ ТО ЕСТЬ С НАРУЖНОЙ СТОРОНЫ ЛЕЗВИЙ ВНУТРЬ НЕ ДВХСТОРОННО И НЕ С ТАКИМИ ГРУБЫМИ КРУПНОЗЕРНИСТЫМИ ДИСКАМИ.👌
correct, only the inclined side (or the outward sides) of the cutting edge should be sharpened, other way the two blades won't contact properly with each other
19.15 you can use a piece of the blade of a cutter and not to spoil a pencil sharpener... by the way, you have not show how fixed the blade, gluing it or what, and not many clothes pegs have that flat points
24.30 stick and adhere first well the paper to the blade or the etching will probably become blurred... unless that's what you are artistically looking for
siempre se aprende algo, aunque sólo sea hacerlo de otro modo, siempre puedes recordar buenas ideas o encontrar otras nuevas, esta es la regla de oro del inventor: siempre suele haber un modo mejor de hacer las cosas que como se hacen
Amesome Ideas, continue
Amazing 🎉
28.40 you made that cut on purpose, you savage! ha ha
Nice work ❤❤❤❤❤❤
Nice Vid!👏🏻✅🧡
Ok thank you 👍❤❤
21.20 or well, do the grooves on the round head of a screw and use it as a burr, though your way looks more precise
Досмотрела до конца с интересом и удовольствием! Кое-что взяла себе на заметку! Спасибо!
Я знал что есть ещё такие 😂
What is the black stuff he is sandpapéing
probably a charcoal from his barbecue... or maybe a ruined piece of meat ha ha
great ideas, i wouldn't use my bare fingers to hold metal objects i was drilling, saw too many tuff guys doing this and ended up with severe cuts or even a detached finger, especially the bottle cap hack. not a disser, but some hacks would be easier to go out and buy dollar tree item, but hey, it's fun tinkering, i do that too>
majstori za sirotinju - požar u najavi...
САМЫЙ ДУРНОЙ СПОСОБ ОБТОЧИВАНИЯ НОЖНИЦ.
СОВСЕМ ИСПОРТИЛ НОЖНИЦУ. НОЖНИЦЫ ОБТАЧИВАЕТСЯ ТОЛЬКО С ОДНОЙ СТОРОНЫ ТО ЕСТЬ С НАРУЖНОЙ СТОРОНЫ ЛЕЗВИЙ ВНУТРЬ НЕ ДВХСТОРОННО И НЕ С ТАКИМИ ГРУБЫМИ КРУПНОЗЕРНИСТЫМИ ДИСКАМИ.👌
correct, only the inclined side (or the outward sides) of the cutting edge should be sharpened, other way the two blades won't contact properly with each other
16.05 good idea, but remember not to do it with the tin wire
4.20 don't forget to insert previously the heat shrink or you'll turn mad ha ha
19.15 you can use a piece of the blade of a cutter and not to spoil a pencil sharpener... by the way, you have not show how fixed the blade, gluing it or what, and not many clothes pegs have that flat points
La mezcla es con polvo de carbón y el líquido que lo endurece como se llama gracias
👍👍👍👍👍👍👍
What is that liquid?
28.20 annoyng excessive precision for hanging them
0.30 you are adding cyanoacrylate glue, and i guess almost every powder is suitable for this
15.15 approximately ha ha
24.30 stick and adhere first well the paper to the blade or the etching will probably become blurred... unless that's what you are artistically looking for
7.40 or just try with a lump of foil, we know from (6.15) you have it at home
22.55 don't mutilate the other bird, man
OK❤😊
Waris
28.55 much better a copper tube
Снотворное видео
Щайтан совсем😂
Another Billy Bodge video.
Скачивают друг от друга и выкидывают в Ютуб, надоело смотреть одно и тоже!
не смотри
siempre se aprende algo, aunque sólo sea hacerlo de otro modo, siempre puedes recordar buenas ideas o encontrar otras nuevas, esta es la regla de oro del inventor: siempre suele haber un modo mejor de hacer las cosas que como se hacen