Perfect Dado jig - Kerfmaker

#plywoodworking #Kerfmaker #dadojig
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
Simple easy-to-make table saw jig that will let you cut perfect dados with only the use of a single table saw blade. I had some leftover pieces from my last project. So I decided to make something out of it. This woodworking jig is made from scrap Hmr wood and a few bits of hardware found in almost every workshop. Once set the Kerfmaker right, it works perfectly every time. Easy and repeated make dado slot
this is really help me for working and I am very pleased with the results and would recommend making one yourself
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...
--------------------------------------------------------------------------------------------------

[@adilgamza5952]

молодец...все просто..и не жадный ..за чертежи сразу в рай ))

[@plywoodworking]

thank you

[@dekayscrafts]

Good work Thanks 👍

[@plywoodworking]

Thank you very much !!

[@KitoMarchetaria]

Very good Jig ! 👍

[@plywoodworking]

Thank you

[@norbertgallice7769]

Good job 👍👏 Thank you. Norbert (France)

[@plywoodworking]

Your welcome 👍👍

[@MCsCreations]

Really beautiful job, dude! Works amazingly! 😃

[@plywoodworking]

Thank you my friend

[@nemonautilus70]

Progetto molto bello e realizzazione precisa, è sempre un piacere guardare i tuoi video.

[@plywoodworking]

thank you hope can give inspired !

[@alanrees4837]

thanks' i thought i would double check before i make one thank you

[@plywoodworking]

your welcome

[@腹我立造]

ビスのピッチと回転角度にて０．１～０．２mm程度の微調整が出来ますね！

[@plywoodworking]

yup you right, thank you for suggestion

[@ubiratanoliveira692]

Sei que deve ser muito útil, contudo vi o vídeo dormindo em pé, não entendi direito, terei que velo novamente. Mas vindo de quem vem, tenho certeza que deve ser mais um dos seus muitos excelentes projetos.

[@plywoodworking]

Thank you, maybe more difficult for understand that why i give free plan for easy maybe need this jig, i think this jig useful for make jointing, easy for repeated dado slot

[@Pepe-ry8pm]

A really very useful tool! PS: Fingers always away from the saw blade 11:16

[@plywoodworking]

thank you very much!!😉

[@bret_Lambky]

I have one I made! It’s a great concept, and works great! Thanks for the video!

[@plywoodworking]

Your welcome, yes this jig really help me

[@thekorink]

Mantap Bang......

[@plywoodworking]

makasih banyak mas

[@shagovdima]

👍👍👌

[@plywoodworking]

Thank you very much

[@danaparish1644]

Why not just cut a rabbet in the piece instead of cutting 4 pieces and gluing together?

[@plywoodworking]

thank you very much

[@leahcimressik5994]

Supi 👍🤗👍👍👉🏅👍👍👍👍👍

[@plywoodworking]

Thank you

[@نورالدين-ق9ص9ذ]

Je vous propose de remplacer le vis de reglage lié à l'épaisseur de la lame par un aimant fixé dans le corps du jig et d'y fixer une cale métallique correspondant à l'épaisseur de la lame.

[@plywoodworking]

good idea, but if use that i have little problem if i change the blade, i cant adjustment the guide.
but Thank you for sugestion

[@ianbodey6245]

Hi silly question but what kind of wood do you use, if it’s ply what kind is it..?????

[@plywoodworking]

This is new material call HMR high moisture resistant, look like mdf but more solid, flat, durable and water resistant

[@АлександрВладимирович-к2р]

Отлично, но лучше из дерева твёрдой породы делать 👍.

[@plywoodworking]

yes you right more good made from solid wood, this is simple fast solution if you dont have router table

[@randaljkiddsr7156]

No closed captioned

[@plywoodworking]

thank you

[@alanrees4837]

Is there any purpose for the other bolt or was it a mistake ?

[@plywoodworking]

i made mistake for that, not 100 mistake but not comfortable that why i make new position

[@gregflowers6529]

Done made this 3 times and never seen being used

[@plywoodworking]

this jig really help me make fast dado

[@b3arwithm3]

You should at least give credit to the inventor. Majority of your jigs are exact copies from other channels

[@plywoodworking]

Thank you

[@ebdavid]

i can't help hearing this abbreviation: HMR. what does it mean>

[@plywoodworking]

High Moisture Resistent, this new material the next MDF this is for detail explain
www.sinkwarehouse.com.au/blog/what-is-hmr-board-why-it-is-best-material-for-your-bathroom-vanity-cabinet/

[@rwind656]

Good enough jig but double-stacking so many ads in one small video is overdoing it.

[@plywoodworking]

Thank you, i only place but ads all from youtube.
Sorry for uncomfortable

[@rwind656]

@@@plywoodworking I don't know how ads are placed, but each ad -- and sorry, but there were already too many -- was followed immediately by another ad. Maybe you can fix it.

[@plywoodworking]

@@rwind656 in my mind if video more popular youtube give many ads on video, i think this work ike that. sorry about that coz youtube life for ads. my chanel going down on last week, maybe this week will raise again that why youtube give many ads, usually like that!

[@njprosigns2864]

drsquatch.com wasting their ads money on a link that don't work..shm

[@plywoodworking]

thank you