i want to change the control rod position on my little umx Champ those little horns are delicate and stuck in foam that could easily be damaged- so do you use the pliers to bend the rod or to bend the plastic horn ? or both ?
I use a Z-bend....with a U in the middel of the rod...you can squeeze or lengthen the U to center the control interface ;) works if your wire is strong enough (1.1mm will do)
Think of resolution as servo steps - you can have the same travel distance, but you can have many steps in between the two endpoints. If you have less steps, the servo movement will be jumpy and twitchy. With more steps, the smoother the movement gets. You often want as much resolution as possible.
I crashed my jetiger into the ground at very high speed on its maiden due to to small control throws! Damage was pretty bad but i fixed it, set big throws and now it is a treat to fly.
Hi Guys, thanks for another great video. Can you please advise what that tool was that gave you the "L bend". No not the pliers :-) the little red thing that you twisted... Thank you.
On the topic I have 15 different brand of servos, no hobbico untill My Cessna 350 Corvalis showed up, maiden was great. So I did my tear down after maiden and the servo arm was broken to the elevator. Long story short why can't servo heads be universal?? I mean I have 30+ planes and not one control arm will fit the corvalis rrrrrrrrrr. Great vid guys
David is from Sweden. Resolution is how sensitive the control stick is, and how little you can move the control surface per movement of the stick... Spraynpray is not right, because movement and resolution are something different.
Hey this is my fiances account so pay no attention to the name or picture. I am a guy. Anyway I am in desperate need of advice about my plane. Also I have a question about a competition that I supposedly lost.
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
i want to change the control rod position on my little umx Champ
those little horns are delicate and stuck in foam that could easily be damaged-
so do you use the pliers to bend the rod or to bend the plastic horn ?
or both ?
Love this quick Fast Tip Videos!
Why is this video age restricted?
Vikas Suresh Engineer porn
Don´t pretend that you´re not getting horny
I really like the Chad and Chris vids!
i was wondering if you guys could do a fast tip on different kinds of motor mounts, and easy ways to build your own.
thanks so much.
-Joe
I use a Z-bend....with a U in the middel of the rod...you can squeeze or lengthen the U to center the control interface ;) works if your wire is strong enough (1.1mm will do)
What kind of wire do you use for pushrods
The more your servor arm moves in relation to the control surface the smoother and more precise it is.
Your channel is awesome
Think of resolution as servo steps - you can have the same travel distance, but you can have many steps in between the two endpoints. If you have less steps, the servo movement will be jumpy and twitchy. With more steps, the smoother the movement gets. You often want as much resolution as possible.
OK, where did you get the piano wire?
I crashed my jetiger into the ground at very high speed on its maiden due to to small control throws! Damage was pretty bad but i fixed it, set big throws and now it is a treat to fly.
Thanks for the tip guy's...See you in Toledo?...
Hi Guys, thanks for another great video. Can you please advise what that tool was that gave you the "L bend". No not the pliers :-) the little red thing that you twisted...
Thank you.
Dubro wire bender
Yes, My controller had the resolution turned down on my first flight. I had no control and it came down nose first.
what tool do you use for the z bend .I have alot of difficulty making them so I might buy one.
Dubro wire bender
Thanks
I had my f4f wildcat really tamed down on the ailerons, and crashed because I did a loop and ended up inverted, followed by a nosedive.
@trobi81 I believe that was a "z" bend and a zbend machine
Nasty prop scar at 0:57! I have one, but it's from a circular saw.
ok thought you could put the connection on any hole on the linkage now this newbie knows a bit more thanks
Please link me the screwlock in hobby king !! I would like to order it but cant find it anywhere. Thanks have a good day.
What was the red tool used for making z-bends?
Dubro wire bender
Thanks!
@@TOMVUTHEPIMP $26, i think i;ll stick with pliers
YAYAYYAAY DaViD is Back!!
You are the best
Good video
S'il vous plait, ou peut-on trouver l'outil utilisé à 1'10"?
Is it you please. or can we find the tool used at 1'10 ''?
www.amazon.com/Du-Bro-Bender-Wire-Forming-Tool/dp/B002SX08HM
could you guys make a video about how to start and run a gas/glow motor?
You really don't know much about FliteTest, do you? 😳
Don't forget to always have your control rods attach to the horns directly even with the hinge itself!
more fpv challenges please! :)
On the topic I have 15 different brand of servos, no hobbico untill My Cessna 350 Corvalis showed up, maiden was great. So I did my tear down after maiden and the servo arm was broken to the elevator. Long story short why can't servo heads be universal?? I mean I have 30+ planes and not one control arm will fit the corvalis rrrrrrrrrr. Great vid guys
cool tip
Hahah the end is Good
"fer realz" bang!
That David is wild!
David is from Sweden. Resolution is how sensitive the control stick is, and how little you can move the control surface per movement of the stick...
Spraynpray is not right, because movement and resolution are something different.
This video is rated for adults lol
'Personal space'
Too, damn close.
What do you do if you are getting as much flex as you show in the video.
you should use loctite on this screw-mounts on ailerons !! I lost my plane cause I didn't use locktite. !
can you tell me what "resolution" is? Anyone? And david sounds like on a different accent...
The resolution is how fine the control movements are. Lower resolution means more course adjustment, higher resolution allows for better fine-tuning
Actual movement of the control surface.
10 YEARS LATER I LOVE YOUR FACES .
heat shrink is even better!
Where can i Get the L controll horn PLZ anser
nice
1:08 where do I buy that thing
Dubro wire bender
Instead of carbon fiber, you can use clothes hanger wire instead
more fast tips!
thats a Z bend tool you can buy at most local hobby shops
What is meant by resolution ?
can move in smaller increments
At time 0:28, "What is the name of that plastic snap on piece?" I want to order it! Any commenter can answer it!
clevis keeper clip
Resolution/Distance
Why is the video age restricted🙁😤
I miss David :(
:(
:(
David should get more screentime. He seems to know what he is talking about.
this chad is such a chad
useful tip! David, I want more of you fpv stuff !!!! also check out my TY vids!! that's all thanks to you guyz!
David is Swedish right? Could hear that at once! :D Norway here!
russian I believe
@@Hakinank Took you 8 years to respond! :D
@@zyxelina I made a broad research :)
i loooovvvveeeee watching "flight" test.......wow,it even looks weird spelt THAT way
His name is Chad.
.
.
.
.
Oh didn't know he is Swedish!
Whats the tool at 1:08?
That was Chad... Oh.. the Tool... That was Chad..
Dubro wire bender
If you don't have enough throw your plane is actually gonna crash for reals?
lol
Yes, wait what?
Not the guy, the tool. Chad is not a tool.
"Crash fer realz"?
I can’t watch it cause it’s age restricted
You guys are way too straight together! Nice touch of comic relief at the end. But thanks for the good info.
enduku age
flite test? U mean flight test??
Why this video ok then just
actually you have the same resolution either way...
lol.. It will crash.. for reals!
Der plane will crash Fur realz,,, Ja.
Nope, he's not.
Hey this is my fiances account so pay no attention to the name or picture. I am a guy. Anyway I am in desperate need of advice about my plane. Also I have a question about a competition that I supposedly lost.