Ableton Live with Midas M32R / X32

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 36

  • @mybromedia6310
    @mybromedia6310 4 ปีที่แล้ว +3

    please can we get a tutorial on behringer x32. how to connect it to ableton live lite..

  • @blessidunion
    @blessidunion  ปีที่แล้ว

    Go to 3:57 in the video to see how to select the input from mixer. Pause it there and look at the channel next to it just for example. Click the monitor “In” button to hear the input of your synth. If you select the correct inputs you will hear your synth.

  • @spacechord
    @spacechord ปีที่แล้ว

    Hi, I founded your video because i was sesrching a way to have One external synth route to ableton, so i can use vst plugins to effect my synth in real time. How i can do t'hat? I own a behringer x32 producer. Thank you a lot for any kind of help.

  • @aomassoud
    @aomassoud 5 ปีที่แล้ว +1

    nice video .. but when i'm recording i'm not getting a good signal on abelton or protools even when i turn up the gain from the Midas mixer .. any tips about that ?

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว

      I find myself turning up the gain quite a bit when recording. That's because when you select local 1-8 for your card out, you are just hearing the signal after the gain on the input. If that's not enough you will need to select Out1-8 on your card out, and set the tap to post fader. Then you have more gain on the card out that is the input to Ableton or ProTools.

    • @fxcudrillz
      @fxcudrillz 2 ปีที่แล้ว

      I have the Same Problem. i turn up the gain in the mixer up to -3 db (just before clipping) but in mi Ableton Audio Chanel y have -12 db.
      I think that the POST FADER trick is good, but if i want to record a live show i need the faders to control de FOH.
      i found many people on internet with the same problem but never a straight answer.
      if you have solved the problem, please share your move! Thanks a lot

  • @joeytang3678
    @joeytang3678 4 ปีที่แล้ว

    Hi, any idea why my abletons input levels are not effected by the input channel fader on my board? I can turn the boards fader all the way down and ableton will still receive a signal.

    • @blessidunion
      @blessidunion  4 ปีที่แล้ว +2

      joey tang yes. Check your card settings on the routing page on your mixer. If your your card setting reads local 1-8 it’s sending to the ableton input just after the input knob on the mixer. Fader will do nothing. If you set card 1-8 to out 1-8 you should get fader control but to have to send signal to bus 1 then make sure your bus 8 fader is up as well as the channel fader. Easier than it sounds. I’ll make future video,

    • @blessidunion
      @blessidunion  4 ปีที่แล้ว +1

      joey tang check this video th-cam.com/video/iq-eDbawHsU/w-d-xo.html&feature=share

    • @joeytang3678
      @joeytang3678 4 ปีที่แล้ว

      @@blessidunion Yes! please do! its driving me crazy. Still can't get it to work.

  • @andym7333
    @andym7333 ปีที่แล้ว

    HOW TO SEND MIDI FROM ABLETON TO XR FOR DELAYS

  • @MusicaMercy
    @MusicaMercy 5 ปีที่แล้ว

    Greetings ..... I like the sound of that console as pre amp ...... I miss your Digital Performer tutorials.

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว +1

      Wow that was a while ago! Thanks

  • @papaschlumpf1390
    @papaschlumpf1390 4 ปีที่แล้ว +6

    When you moved on from nuclear fusion and fighting spiderman to audio producing

  • @peterantal85
    @peterantal85 4 ปีที่แล้ว

    Hey Jeff thanks for the video. Recording like this worked for me, however every once in a while there is crackling and distortion in the audio when i listen to it after, as if my computer was struggling to process it all. The thing is that i got a new macbook pro that can handle a lot more than that. Any clues?

    • @blessidunion
      @blessidunion  4 ปีที่แล้ว

      That’s usually a digital issue somewhere. Maybe a mismatch. Can you explain your signal flow?

    • @jeremiascisneros5670
      @jeremiascisneros5670 3 ปีที่แล้ว +1

      You have the monitor on most likely you need to turn it off, the same thing happened to me

  • @Soulpuddinghtx
    @Soulpuddinghtx 4 ปีที่แล้ว +1

    Super great job thank u 🥂

  • @28rwags
    @28rwags 6 ปีที่แล้ว +1

    So are you not using the Mackie Control because it works amazing with Ableton?

    • @blessidunion
      @blessidunion  6 ปีที่แล้ว +1

      I use it as a control surface sometimes. Depends on what I'm doing. If I'm recording while songwiting or composing, I usually just use as a 2 track interface and use the mouse in Ableton. If I'm playing multiple tracks as backing tracks live I'll assign each track a separate output and mix on the M32 so each band member can get a different mix in their in ear monitors. When mixing in Ableton I'll assign only the master mix out to stereo 1/2 and then use the M32 as a midi control surface to control the faders in Ableton.

  • @SupeBeatz
    @SupeBeatz 6 ปีที่แล้ว

    Great video, Looking at purchasing one. Are mixes on this unit better than mixing in the daw?

    • @blessidunion
      @blessidunion  6 ปีที่แล้ว

      Supe at it I wouldn’t say they are better but it can make your workflow better if you are used to working with an analog mixer. I typically mix in the DAW and track using the console to monitor what I am recording. I also use the mixer for live shows.

  • @jamessssssssssssss
    @jamessssssssssssss 4 ปีที่แล้ว

    do you need any certain drivers to do this? on pc

    • @blessidunion
      @blessidunion  4 ปีที่แล้ว

      Not on the Mac which I use but not sure about the PC

  • @Bamibakker
    @Bamibakker 5 ปีที่แล้ว +1

    How can you configure it so the first midi has an audio out to master? I can't seem to get a click track into my x32 rack..

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว

      I will do a screencast of this on Ableton in the next few days.

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว

      th-cam.com/video/KW74cz9Gpc4/w-d-xo.html

  • @RottenCircuits
    @RottenCircuits 5 ปีที่แล้ว +1

    th-cam.com/video/os5gAnFWQJg/w-d-xo.html if you want to sync your Midas delays with the Ableton tempo. Cheers!

  • @Willem-jc2qm
    @Willem-jc2qm 5 ปีที่แล้ว

    My ableton doesnt recognize the midas m32r live I have connected it via USB do you know why ableton doenst recognize it?

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว

      Willem 1234 as midi controller or sound card or neither one?

    • @Willem-jc2qm
      @Willem-jc2qm 5 ปีที่แล้ว

      Jeff Pence neither one but I want to be able to both use it do you know what I do wrong I have tried connect it with midi and usb but the driver I installed on my pc also doesnt recognize the midas

    • @blessidunion
      @blessidunion  5 ปีที่แล้ว

      Willem 1234 do you have access to another Midas or Behringer mixer to test it? I’m not familiar with using able ton on a pc. Just a Mac. Can you see the m32r as a sound device on the pc on other apps like a sound device for windows?

    • @Willem-jc2qm
      @Willem-jc2qm 5 ปีที่แล้ว

      Jeff Pence no I only can use this midas but I will try it with an macbook but the pc didnt find the mixer but I will try it with an macbook

    • @law8don8
      @law8don8 5 ปีที่แล้ว

      @@Willem-jc2qm did you have a success with MAC? Was PC resolved?

  • @jefff4625
    @jefff4625 5 ปีที่แล้ว

    Check out this travel case for the m32r!
    goo.gl/images/ZUekm1