Which will Increase Water Pressure At Home - 90° Elbow Vs Double 45° Shoe Bend | Plasto Plumbing Tip
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2022
- A simple way to increase water pressure at home.
In the video:
In this video, we've explained a simple way to increase water pressure in your home.
One way to increase water pressure is by reducing the sudden bends in your pipeline.
90* elbow acts as a sudden bend. It is observed that we get 3.7LPM of friction loss
and in double 45* shoe bend we get only 2.3LPM water discharge.
Using a double 45* shoe bend will help you to get for water discharge than 90* elbow.
In the experiment:
In the video, we've shown an experiment that we conducted in Plasto factory where
two discharge lines of 3/4" were taken out from Plasto 6-layer gold tank.
In the experiment we can see how adding Plasto double 45* shoe bend can help us
to increase the water pressure.
If you find this video informative, do comment down below your thoughts
about it.
For Plasto ghamela enquiry/ Plasto dealership enquiry: wa.me/917767007071/
Follow Plasto Social Media Platforms:
TH-cam: / rcplastotanksandpipesp...
Facebook: / rcplasto
Instagram: / rc_plasto
LinkedIn: / r-c-plasto-tanks-&-pip...
Twitter: / rcplasto
#increasewaterpressure #howto #plasto - วิทยาศาสตร์และเทคโนโลยี
👌 हम भी इसका प्रयोग करके देखेंगे
लाजवाब प्रोडक्ट। नयी जानकारी के लिए प्लास्टो को धन्यवाद। अब हम इस नये अन्वेषण के उत्पाद का उपयोग करेंगे।
"Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you."
खूपच छान अतिशय सुंदर
Dhanyawad Sir
Very important and useful information.for all.
"Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you."
Very good infermation thants
Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you.
Good Informetion..
सरcpvc 1/4 के स्लीप बेंड तयार कोजिये
बहुत अच्छी जानकारी
Thank you Sir
@@RCPlastoTanksAndPipesPvtLtd༼ᕗຈل͜ຈ༽ᕗᕦ⊙෴⊙ᕤᕦ( ⊡ 益 ⊡ )ᕤᕙ( ¤ 〰 ¤ )ᕗ୧(﹒︠ᴗ﹒︡)୨ᕦ( ⊡ 益 ⊡ )ᕤ
Thanks for explain in practically
Glad we could help Sir/Madam
❤️❤️❤️
👍👍👍
Sir kya aap yahi same video me round sweep bend bhi use karke dikha sakte hai? To hume teeno ka pressure pata chal jaega
Ek out put me 90 degree bends
Ek output me double 45 degree
Aur ek teesre output me round sweep bend
Long bend is slightly better
@@RCPlastoTanksAndPipesPvtLtdbetter than double 45 ?
very true thanks
f555y6yt ex
So nice of you
🙏🏻👌🏻
Very informative and useful vedio
Thanks a lot
Thenkyou bhai esi information TH-cam nhi thi abhi tak
Maans jZm kasa kKk kinhim nbbbnnm m ko m as na. As K
Naya Idia Diya Danyaavad......
Why not Co. Introduce singal L which is like 45 digry double L for which you appeling
There is more pressure drop in elbows due to friction as compared to bends.
We make long bends as well
आप डबल ४५° elbuw के बजाय ९० ° Long Radias elbow लगायेंगे तो भी pressure अच्छा मील सकता है.
yes, long bends are equally helpful to reduce pressure loss
Ok
O my god
"Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you."
Sir mujhe bulk quantity(1gadi) me upvc and swr ke pipe and fitting item chahiye aapka no chahiye sir
Hello sir...Thank you for your interest. For products enquiry you can directly WhatsApp us on this number- wa.me/917767007071/ . Or please give your phone number, city and state name. our team will call you. Thank You
👍😊👍😊
I 5
ZZ
♠︎●♤@@Shivraj12863
Mere gharme j I pipeline bitai gai hai Washing machine ko 1/2"line hai to Washing machine ko flow badane ke kahase 45.angled bent dalu
Plasto hai to sahi jankari h...
Thank you Sir
To phir 90 deg bend kidhar use karenge
Please avoid 90 degree elbow
@@RCPlastoTanksAndPipesPvtLtd ❤️❤️
Apake fayadeka Soche.....
e a good day😊 for lelll) l@@MantuYadavYM ol ok ok na to be a ll get ll l l great day my ree2ww like
पाणी नीचे से उप्पर मोटरसे खिचे तो प्रेशर कैसे बढेगा वह बतावो
Good video Hight versus pressure and discharge of water flow video plese .at 55 feet hight of tank what is the flow at bottom 3/4 pipe
मा
..
@@vitthaltalathi8563 yuuiyuu
@@vitthaltalathi8563 pppppppppppppppppppppppppppppppppppppppppp
@@vitthaltalathi8563 kammi.umj...
@@vitthaltalathi8563 w
Good advice
"Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you."
0
Double 45 degree ? it is not a fair trail. 1 45 degree with 1 90 degree. let see who is faster.
friction loss in 90 degree bend is 4 meters of pipe length
friction loss in 45 degree bend is 1 meters of pipe length
30 seconds is nothing. make it upto 15 minutes with pressure
Pl mk
Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you.
Very surprised to see such a silly suggestion of using double 45 degree elbows. Go ahead and use a single 90 degree bend. It will save both material and labour cost and also will given even more water than double 45 degree bends. Check it out
🤔
Uncle engineering mai fail hue the kya? 90 degree elbow sharp bend hota hai. Jisse pani ka flow zyada kum hota hai. Isi sharp bend ko kum krne k liye hum double 45 degree lgate hai us sharp bend ko smooth karne k liye.
Double 45 degree se hamesha 90 deg elbow k mukable zyada pani milega.
Radhe krishna
@@theanonymous8652
Yes. I made a mistake. You should have used a 90 degree Bend. Sorry. But using 2 x 45 degree bends are absolutely foolish idea
waqt qqQqq
Kitna baar bolega plasto
Jl
My
"Thank you for your interest. For Product Details And Enquiry WhatsApp us on wa.me/917767007071/
OR Please fill these details:
Name:
Mobile no:
City:
Query:
Our Team will contact you."